Contact Us

AD8207WBRZ

Brand: Analog Devices
Analog Devices AD8207WBRZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8207WBRZ — Analog & Mixed-Signal ICs | Superb Automation

AD8207WBRZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8207WBRZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD8207WBRZ: Zero-Drift Current Sense with 1 Microvolt per Degree Drift

The AD8207WBRZ is a bidirectional difference amplifier with a fixed gain of 20, built for current shunt measurement on rails far above its own supply. The operating common-mode range is minus 4 V to plus 65 V on a 5 V supply and minus 4 V to plus 35 V on 3.3 V, survival is minus 25 V to plus 75 V, and the input offset drift is 1 microvolt per degree Celsius maximum, with less than 500 nanovolts per degree typical. Gain drift is under 10 parts per million per degree typical, common-mode rejection is better than 90 dB from DC to 10 kHz, and the part carries AEC-Q100 qualification for automotive use. EMI filters sit on the inputs inside the package.

Published values

ParameterValue
Gain20 V per V, fixed
Common-mode range, 5 V supplyminus 4 V to plus 65 V
Common-mode range, 3.3 V supplyminus 4 V to plus 35 V
Survival rangeminus 25 V to plus 75 V
Supply range3.3 V to 5.5 V
Offset drift1 microvolt per degree Celsius maximum, 500 nanovolt typical
Gain driftunder 10 parts per million per degree Celsius typical
Common-mode rejectionbetter than 90 dB from DC to 10 kHz
Reference pinsVREF1 and VREF2, output offset across the supply range
Input filteringEMI filters included on the inputs
Temperatureminus 40 to plus 125 degrees Celsius
Package8-lead SOIC

Zero drift is a system statement, not a datasheet trophy

An offset drift of 1 microvolt per degree Celsius at a gain of 20 is 50 microvolts of input-referred drift per degree at the output, which over a 100 degree sweep is 5 millivolts. On a 5 mOhm shunt that is 1 A of apparent current change with no current flowing. Compare that with a conventional amplifier at 15 microvolts per degree: the same sweep gives 75 millivolts and 15 A of apparent drift, which is why the zero-drift family exists for shunt measurement and not for signal amplification in general. The price is switching noise at the chopper frequency, which appears as a small ripple on the output and is filtered by the same RC that filters the PWM common mode.

Five volt supply, sixty-five volt common mode

The internal input stage divides the common mode down before the difference is taken, and the divider ratio changes with the supply rail, which is why the published range is 65 V on 5 V and 35 V on 3.3 V. Running the part on 3.3 V in a 48 V system puts the common mode outside the operating range even though the part survives, and the output will be wrong rather than absent. In a system with both rails available, power the current sense amplifier from 5 V and let the logic run on 3.3 V: the output is ratiometric to the supply, so the converter reference has to match the supply used, and mixing the two is a calibration error that appears only at temperature.

PWM inputs and the EMI filter that is already inside

Motor and solenoid drives present a common mode that swings the full rail in tens of nanoseconds. The internal EMI filters remove part of that edge energy, but they do not replace the external RC at the pins, because the internal filter is inside the package and the trace between the shunt and the pin still radiates into the input. The usual arrangement is 1 kohm and 100 pF on each input, placed within a few millimetres of the package, with the two halves matched to better than 1 percent. That matching, not the amplifier's rejection, is what sets the residual switching ripple at the output. The two reference pins should be driven from a low impedance source and bypassed, since noise there appears directly at the output.

Choosing the shunt around the drift budget

The shunt value sets the signal and the loss. A 1 mOhm shunt at 20 A gives 20 mV, which after a gain of 20 is 400 mV, a comfortable signal for a 12-bit converter on a 3.3 V reference. The loss is 400 mW, which is a lot for a surface mount resistor. A 0.5 mOhm shunt halves the loss and halves the signal, and the amplifier's 1 microvolt per degree drift plus its input offset then becomes a larger fraction of the reading. The crossover is around 10 mV of full-scale shunt signal: below it the offset and drift dominate, above it the thermal noise and the shunt tolerance do. Size the shunt for at least 20 mV at rated current if the measurement has to hold accuracy over temperature without calibration.

Availability and second sourcing

The 65 V common-mode range, the gain of 20 and the reference pin structure are the three things a substitute has to match, and the drift specification is the fourth: a part with ten times the drift will pass a bench test at room temperature and fail in the field. The amplifier cross reference page lists the current sense family by common-mode range, the ADI part second source page separates the zero-drift grades from the conventional ones, and the verification checklist is the sequence to run before a substitute is released.