Contact Us

AD7685BCPZRL7

Brand: Analog Devices
Analog Devices AD7685BCPZRL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7685BCPZRL7 — Analog & Mixed-Signal ICs | Superb Automation

AD7685BCPZRL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7685BCPZRL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD7685BCPZRL7: 93.5 dB of SINAD is 15.2 effective bits, not 16

The AD7685BCPZRL7 is a 16 bit charge redistribution successive approximation converter that samples at 250 kSPS from a single 2.3 V to 5.5 V supply. The input is pseudo differential: the converter measures IN plus against a ground sense at IN minus, over a range from 0 V to the external reference, and the reference may be taken up to the supply rail. A separate logic supply from 1.8 V to 5 V lets the part talk to a modern host without level shifting, and the serial port can daisy chain several converters on a three wire bus or provide a busy indicator instead.

Two facts in the order code decide what arrives. The BCPZ body is the 10 lead LFCSP rather than the 10 lead MSOP, and the temperature range stops at plus 85 degrees C, which is the number that rules the part out of most industrial cabinets even though the resolution and the speed look right.

What the vendor page states

ParameterValue
Resolution16 bit, no missing codes
Throughput250 kSPS
Integral non linearityplus or minus 0.6 LSB typical, plus or minus 2 LSB maximum
SINAD93.5 dB at 20 kHz
Total harmonic distortionminus 110 dB at 20 kHz
Supply2.3 V to 5.5 V, logic interface 1.8 V to 5 V
ReferenceExternal, up to the supply rail
Power1.4 microwatt at 2.5 V and 100 SPS, 1.35 mW at 2.5 V and 100 kSPS, 4 mW at 5 V and 100 kSPS
Standby current1 nanoamp
InterfaceSPI, QSPI, MICROWIRE and DSP compatible, daisy chain, busy indicator
Temperatureminus 40 to plus 85 degrees C

The gap between resolution and accuracy

A 16 bit converter at a 2.5 V reference has a code size of 38.15 microvolts, and at 5 V the code is 76.29 microvolts. The published SINAD of 93.5 dB is 15.24 effective bits once the usual 1.76 dB is removed and the result is divided by 6.02, so roughly 0.76 of a bit is lost to noise and distortion before any error in the reference or the driver is counted. The minus 110 dB distortion figure is a ratio of 316,228 to 1, which is well below one code at either reference voltage, so distortion is not what limits a well built chain. The reference and the input driver are.

Power scales with throughput rather than sitting at a fixed quiescent level: 13.5 microwatts per kSPS at 2.5 V, so the same part runs at 1.4 microwatts at 100 SPS and 1.35 mW at 100 kSPS, a span of 1,000 to 1. For a battery instrument that wakes twice a second, that scaling is worth more than the headline current. At the full 250 kSPS a conversion cycle is 4 microseconds, and reading 16 bits plus the two trailing zeros inside that window needs a serial clock of at least 4.5 MHz, which is the number to check against the host port before committing the board.

Questions buyers ask before ordering

Is this a differential converter? No, it is pseudo differential. IN minus is a ground sense, not a second signal input, so a true differential source needs either a driver that converts to single ended or a different converter.

Can two of these share one three wire port? Yes. The SDI pin selects daisy chain mode, and the data of several converters leaves on one line, which reduces the isolation cost when the converters sit on the far side of a barrier.

Will it run at 105 degrees C? Not within specification. The specified range is minus 40 to plus 85 degrees C, and the part is widely used in instrumentation that never exceeds that. A cabinet rated at 105 degrees C needs a different converter or a documented derating decision.

How this part is supplied

This converter sits in the Analog Devices analog and mixed signal range, and its pin compatible neighbours are grouped in the ADC and DAC cross reference. Because the family has been in production for many years, a large share of demand now comes from builds that must keep an existing footprint, and the obsolete and end of life cross reference is the page that lists what remains available and in what package.

Request Quote — In Stock, 100% New & Original, Full Warranty