AD7684BRMZRL7
Product Specifications
AD7684BRMZRL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7684BRMZRL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD7684BRMZRL7: 4 mW at 100 kSPS and the 229 uV It Can Be Wrong By
The AD7684 is a 16 bit, 100 kSPS, charge redistribution successive approximation converter with a true differential input of plus and minus VREF, a 2.7 V to 5.5 V single supply, and 4 mW of dissipation at 5 V. It has no missing codes, an internal conversion clock, and an SPI compatible serial port in an 8 lead MSOP. Its power scales linearly with throughput, which is the property that makes it usable in a battery instrument that samples in bursts.
Accuracy in absolute terms
One LSB at a 5 V reference is 76.3 uV, and at 2.7 V it is 41.2 uV. The integral nonlinearity is plus and minus 1 LSB typical and plus and minus 3 LSB maximum, so the worst case is 229 uV at 5 V, which is 0.0046 percent of full scale. That is a linearity figure and not a total error: the reference tolerance, the reference drift and the driver amplifier offset all sit outside it. A 16 bit claim in a datasheet summary is a resolution claim, and the error budget has to be assembled from those separate terms.
Power and throughput
4 mW at 5 V is 0.8 mA, and at 2.7 V and 10 kSPS the figure is 150 uW, or 55.6 uA. The converter therefore fits a duty cycled instrument: sample a burst at 100 kSPS for a few milliseconds, then hold in a state that draws nanoamps, since standby current is 1 nA. Between conversions the analogue input still has to be driven, and the track and hold has a short aperture delay, so the driver amplifier must settle within the 10 us conversion period; this is where a 100 MHz part and a 1 uA part give the same DC answer and different AC ones.
| Resolution | 16 bit, no missing codes |
| Throughput | 100 kSPS |
| Input | true differential, plus and minus VREF, VREF up to the supply |
| Integral nonlinearity | plus and minus 1 LSB typical, plus and minus 3 LSB maximum |
| Supply | 2.7 V to 5.5 V single |
| Power | 4 mW at 5 V, 1.5 mW at 2.7 V, 150 uW at 2.7 V and 10 kSPS |
| Standby current | 1 nA |
| Interface | SPI, QSPI, MICROWIRE and DSP compatible serial |
| Temperature and package | minus 40 to plus 85 C, 8 lead MSOP |
Where it fits
Battery powered data acquisition, portable instrumentation, medical instruments and process control front ends where the signal is differential and the sample rate is modest. The differential input rejects the ground difference between a remote sensor and the converter, which a single ended part cannot do without extra circuitry.
Order code and availability
BRMZ is the MSOP body and RL7 is the reel suffix. The converter family is on the analogue and mixed signal line card.
Common questions
Is the reference included? No. The reference is external and can be set up to the supply voltage, so the full scale is a decision the board makes and the reference error is a term the board owns. A 5 V reference gives 76.3 uV per code and a 2.7 V reference gives 41.2 uV.
Can it sample faster in bursts? 100 kSPS is the maximum throughput, so a burst runs at that rate and no faster. The advantage of the burst is that the average power falls with the duty cycle, not that the instantaneous rate rises.
Where the 16 bit claim stops being useful
The converter is 16 bit and the reference is external, so the accuracy at the connector is set by the reference and the driver amplifier. A 5 V reference at 0.05 percent is 2.5 mV of full scale error, which is 33 LSB and ten times the 3 LSB linearity the part is bought for. A channel that needs 16 bit accuracy at the sensor has to start from the reference and the amplifier and treat the converter as one term in the sum.
Converter comparisons are on the ADC and DAC cross reference page, and the medical front end cases are on the medical device components page.
Request Quote — In Stock, 100% New & Original, Full Warranty