Contact Us

AD654JRZ

Brand: Analog Devices
Analog Devices AD654JRZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD654JRZ — Analog & Mixed-Signal ICs | Superb Automation

AD654JRZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD654JRZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD654JRZ: One Resistor and One Capacitor Set Any Frequency to 500 kHz

The AD654JRZ is a monolithic voltage to frequency converter whose transfer function is stated in one line in the data sheet: f equals V divided by 10 RC. That is the whole calibration. One resistor and one capacitor set the full scale frequency, any value up to 500 kHz, and the same pair sets the gain so that a change of resistor scales the frequency range without touching the linearity. The part runs from a single supply of 5 V to 36 V or a dual supply, draws 2.0 mA quiescent current, has a 1 mV offset and a 250 megohm input resistance, and holds its linearity over an 80 dB dynamic range. The output is a square wave from an open collector stage that sinks more than 10 mA with under 0.4 V of saturation and drives up to 12 TTL loads, optocouplers or long cables.

Published values

ParameterValue
Transfer functionf equals V divided by 10 RC
Full scale frequencyUp to 500 kHz
Supply5 V to 36 V single, or 5 V to 18 V dual
Quiescent current2.0 mA
Input offset1 mV
Input resistance250 megohm
Dynamic range80 dB
Output typeSquare wave, open collector, sinks over 10 mA
Output saturationUnder 0.4 V at 10 mA
Load capability12 TTL loads, optocouplers, long cables
External componentsOne RC network for full scale
Body8-lead surface mount, R suffix

Why a frequency output survives a hostile cable

An analog voltage sent down a cable next to a motor drive picks up whatever the ground difference injects, and no amount of shielding fixes a dc offset. A frequency output carries the information in the timing of edges, so a ground difference shifts the threshold by a fraction of a volt and changes nothing that the counter at the other end can see. That is the reason this part appears in isolated signal transmission, in industrial transducer interfaces and in optical isolation chains where the signal is turned into light pulses. The open collector output makes the interface a matter of choosing a pull up and a threshold, not of matching levels.

The RC network sets gain and linearity together

Because the transfer function is a division by 10 RC, the timing capacitor performs two jobs: it sets the full scale frequency and it sets the charge per cycle that the input amplifier has to deliver. A small capacitor gives a higher full scale frequency and a higher input current, which loads the source; a large capacitor loads the source less but limits the full scale frequency. The data sheet's selection table is the place to pick the pair, and the linearity figure is quoted for the recommended range rather than for any combination, so a build that pushes both to the edge will not meet 0.02 percent. The temperature coefficient of the RC network also lands directly in the output frequency, which is why a stable capacitor type matters more here than in a filter.

Where a V/F converter still earns its place

A converter plus a microcontroller can measure a voltage with better linearity and no drift, but it needs a reference, a supply and firmware, and it puts a clock next to a sensitive node. The V/F route needs two passive parts and a counter input, and it isolates naturally because the signal crosses the barrier as a frequency. For a 4 to 20 mA loop powered transmitter or a legacy panel meter, that simplicity is still the cheaper path, and the part remains in production for exactly those sockets.

Ordering notes

The J grade in the surface mount body is the industrial order code, and the same family is offered in other bodies and temperature ranges. Because the external RC network defines the function, a replacement part has to be checked against the same transfer equation, not against the pinout alone: a converter with a divisor of 5 instead of 10 halves the frequency at the same input and turns a calibrated instrument into an uncalibrated one. The amplifier cross reference lists the analog function blocks we supply, the pin to pin cross reference covers which parts share this outline, and the obsolete part cross reference hub covers the case where a code has gone short.