UCC23313BDWYR
Product Specifications
UCC23313BDWYR
Texas Instruments — Power Management & Signal Chain
Product Overview
The UCC23313BDWYR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
UCC23313BDWYR: a 3.75 kVRMS isolated gate driver with an emulated diode input, 4.5 A of source current, a 105 ns maximum delay and an 8 V lockout, in a stretched six pin SOIC on an 850 piece reel
UCC23313BDWYR is a single channel isolated gate driver that replaces an optocoupler driver pin for pin, using a silicon input structure instead of an LED, so the current transfer ratio does not drift with age in a SOIC body of 6 pins. The DWY body is a stretched six pin SOIC measuring 7.50 mm by 4.68 mm with more than 8.5 mm of creepage, and the B suffix is the version that starts working at 8 V, which is the one a 12 V rail can actually feed.
Order code and package
| Catalogue string | UCC23313BDWYR, where B is the 8 V lockout version, DWY the stretched six pin SOIC and R the 850 piece large reel |
| Body | SOIC, DWY, six pins, 7.50 mm by 4.68 mm, with more than 8.5 mm of external creepage and clearance and a mould compound whose tracking index is above 600 |
| Reel | 850 pieces on a large tape and reel, which is small for a body this size and has to be named on the order |
| Tube | the tube row UCC23313BDWY is marked Obsolete on the addendum dated 6 October 2026, so a prototype comes from a cut reel rather than a tube |
| Finish and moisture | the reel row prints Call TI in both the finish and the moisture columns, which is the vendor saying the data is not published on that row rather than that the part has no rating |
| Temperature | minus 40 to 125 C operating, with the electrical table specified to 150 C junction |
| Marking | UC23313B on the body, which is the only way to tell this part from the 12 V version once the reel is gone |
| Document | SLUSDS6B, September 2019, revised October 2020 |
| Status | Active and in production on the addendum dated 6 October 2026 |
Electrical parameters that decide the application
| Isolation | 3.75 kVRMS for one minute per UL 1577, 6000 VPK of basic isolation per DIN V VDE V 0884-11, 700 VDC of maximum working voltage and 6000 VPK of surge with a barrier life quoted above 50 years |
| Output current | 4.5 A source and 5.3 A sink peak, which is the figure that sets how quickly a 200 nC gate can be moved without an external buffer |
| Driver supply | 15 V to 30 V recommended on the output side with 33 V absolute maximum, so 15 V positive with minus 5 V on the emitter is 20 V of total supply and inside the rating |
| Lockout, B version | rising at 7.8 V minimum, 8.5 V typical and 9.2 V maximum, falling at 7.05 V, 7.75 V and 8.45 V, with 0.75 V of hysteresis, which lets a 12 V rail with tolerance start the part |
| Propagation delay | 70 ns typical and 105 ns maximum in both directions, with 35 ns of maximum part to part skew and 25 ns of pulse width distortion |
| Input stage | an emulated diode with a 1.5 to 4 mA turn on threshold, 1.8 to 2.1 to 2.4 V of forward threshold and a recommended forward current of 7 to 16 mA |
| Reverse handling | 13 V of reverse polarity on the input, which covers an interlock or a bipolar drive without a series diode |
| Common mode immunity | 150 kV per microsecond minimum in both output states, measured with 1500 V of common mode across the barrier |
| Output edges | 28 ns rise time, and a recovery time of 20 to 30 us after the lockout releases and the supply arrives |
| Quiescent current | 2.2 mA of output supply current in the low state, which is small enough that a bootstrap supply can feed it |
| Thermal | 126 C per W junction to ambient in the six pin body, with 66.1 C per W junction to case |
Family options and how they differ
| UCC23313B, the part on this page | 8 V lockout, so a 12 V rail with tolerance starts it and a logic level FET gets useful gate voltage |
| UCC23313 without the B | 12 V lockout, the part for an IGBT or a silicon carbide FET that wants 15 V of gate drive and a defined undervoltage point |
| UCC23513 in the same family | 5.7 kVRMS reinforced instead of 3.75 kVRMS basic, for a product whose safety review needs reinforced insulation rather than basic |
| Against an optocoupler driver | 105 ns maximum against several hundred nanoseconds, and a barrier life quoted above 50 years against an LED that dims from the first hour |
| Against a digital isolator plus a separate driver | one body instead of two, at the cost of an input that wants current rather than a logic level |
| The pulse width distortion figure | 25 ns matters when the drive signal carries a short pulse for a soft turn off, because that is the pulse that gets lost |
Points to check before this part goes on a BOM
The emulated diode input is the whole point and the first thing that catches people out. An optocoupler input is an LED with a resistor, and its current transfer ratio falls as the LED ages, so the drive current has to be set with ageing margin in it. This part behaves like a diode with a 2.1 V threshold and a 1.5 to 4 mA trip window, and its threshold does not drift, so the same series resistor works for the life of the product. What it still needs is the forward current. A controller output that can only source 2 mA will not turn the part on reliably, and the fix is a buffer rather than a smaller resistor, because the threshold window is a current window and not a voltage window.
The 8 V lockout is the difference between a driver that works on the bench and one that works in a product. A 12 V rail with five per cent tolerance and a diode drop in front of it sits near 11 V under load, and a 12 V lockout version stops there. The B version starts at 8.5 V typical and holds until 7.75 V, so the same rail drives it with margin, and the price is that the part no longer protects an IGBT from a low gate voltage, because 8 V is a voltage at which an IGBT is only partly on and heats rather than switches. The lockout version has to be chosen from the switch, not from the rail.
The 850 piece reel is a supply chain fact rather than an electrical one, and it is the one that breaks a schedule. Most parts in this family ship 2500 or 3000 to a reel, so a buyer who quotes from a catalogue assumes the larger number and a production line that plans on 3000 per reel is short on the first order. The tube option for this body is marked Obsolete, so a prototype build of 100 pieces needs a cut reel from a distributor or a partial reel from the vendor, and both take longer than the reel the catalogue implies.
The three isolation numbers are not interchangeable. 3.75 kVRMS for one minute is a withstand test and says the barrier survives a hipot. 6000 VPK is the basic isolation rating under the German standard and describes a transient. 700 VDC is the maximum working voltage and is the number a safety reviewer compares against the continuous voltage across the barrier. A product that quotes the withstand number in its specification and runs the barrier at 900 VDC continuously passes the production test and fails in the field, and the failure is a slow insulation breakdown rather than a dead board on the line.
Power dissipation is dominated by gate charge rather than by quiescent current. Driving a 200 nC gate at 20 kHz and 15 V is 60 mW of gate charge, and the quiescent current adds 33 mW at 15 V, so the total is under 100 mW and the rise in a 126 C per W body is about 12 C. At 100 kHz with a 500 nC gate the same arithmetic gives 150 mW plus quiescent, which is 25 C of rise, and at that point the ambient inside the enclosure becomes the deciding number rather than the driver.
What a 3.75 kVRMS basic rating does and does not cover
Basic insulation means one layer of protection between a hazardous voltage and a touchable part, and it is the rating a motor drive with a floating gate driver usually needs, because the hazardous side is the mains and the touchable side is the enclosure. Reinforced insulation means two layers or one layer proven to the same standard as two, and it is what a medical product with a patient connection needs. The 3.75 kVRMS part covers the first case at working voltages up to 700 VDC and not the second, and the 5.7 kVRMS member of the same family is the part for the second case.
The working voltage is the number that governs life rather than the number that governs a test. A barrier rated to 700 VDC working with a quoted life above 50 years is being run inside its specification at 500 VDC and outside it at 800 VDC, and the second case still passes a 3.75 kVRMS hipot because the hipot lasts a minute and the product lasts a decade. A specification that states the withstand number and not the working number is the one to question during a specification review.
Choosing between this part and an optocoupler driver
The case for keeping an optocoupler is a board that is already in production and a qualification that would have to be repeated. The case for changing is every other consideration: 105 ns maximum against several hundred nanoseconds, 25 ns of distortion against a spread that grows with age, a common mode immunity of 150 kV per microsecond, and a barrier life that is quoted rather than implied. A motor drive that switches 600 V in 20 ns sees a dv/dt that couples straight through the barrier capacitance, and the optocoupler that worked at 5 kHz produces output glitches at 20 kHz.
The pin compatibility is what makes the change cheap. The six pin stretched body is the same footprint as the optocoupler it replaces, so the board change is a bill of materials change, provided the series resistor is recalculated for a current window rather than a current transfer ratio, and provided the board keeps the same creepage slot under the body. A board that removes the slot to make room for a wider pad has thrown away the creepage the part was bought for.
Where this order code fits
This is the gate driver for a floating FET in a motor drive, a solar inverter, an uninterruptible supply or an induction heating stage, wherever the controller sits on a ground that the switch node does not share Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.
Questions buyers ask
Can the output be driven from a 12 V rail? Yes on the B version, which starts at 8.5 V typical and holds to 7.75 V. The 12 V lockout version in the same family will sit in lockout on that rail.
Does it need an isolated supply? Yes. The part isolates the signal. The output side needs a 15 V to 30 V bias supply referenced to the emitter of the switch.
What input current does it need? 7 to 16 mA of forward current, with a 1.5 to 4 mA trip window. A controller that sources less than 4 mA needs a buffer.
Is it pin compatible with an optocoupler driver? The six pin stretched body is the same footprint, and the series resistor has to be recalculated for a current window rather than a current transfer ratio.
Why is the reel only 850 pieces? That is the published packing for this body. There is no 3000 piece reel and the tube row is marked Obsolete, so a prototype order needs a cut reel.
SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.