Contact Us

TPS7B91050DBVR

Brand: Texas Instruments
Texas Instruments TPS7B91050DBVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS7B91050DBVR — Power Management & Signal Chain | Superb Automation

TPS7B91050DBVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS7B91050DBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS7B91050DBVR: 150 mA, 40 V wide input LDO, 5.0 V fixed, 1.8 microamp quiescent, SOT-23-5

TPS7B91050DBVR is a fixed 5.0 V linear regulator rated 150 mA with a 40 V input ceiling and a quiescent current of 1.8 microamp in a SOT-23 body of 5 pins. The 2.5 V to 40 V input range puts it directly on a 24 V or 36 V industrial bus without a pre regulator, and the quiescent current is low enough that the regulator is not the reason a battery or a supercapacitor backed board goes flat while it waits for an event.

Order code and package

TPS7B91050DBVRActive, SOT-23-5, 3000 pieces on a large reel, SN finish, MSL-1-260C unlimited floor life, marking 37BH
TPS7B91050DBVR.AActive, the same string with a material revision suffix, same body and reel
TPS7B91033DBVRActive, the 3.3 V option in the same body, marking 37AH
TPS7B91120DBVRActive, the 12 V option, marking 37CH
Temperature rangeminus 40 to 125 degrees junction on the published rows

Electrical parameters that decide the application

Input voltage2.5 V to 40 V
Output5.0 V fixed on this string, 150 mA
Quiescent current1.8 microamp at no load, 2.5 microamp maximum over temperature
Dropout900 mV typical at 150 mA
Rejection70 dB at 1 kHz, 43 dB at 100 kHz
Output capacitorstable from 1.0 microfarad to 47 microfarad
Protectionfoldback current limit, overtemperature shutdown, internal soft start
Operating junctionminus 40 to 125 degrees

Family variants and how they differ

TPS7B910505.0 V fixed, the string on this page
TPS7B910333.3 V fixed, same body and pinout
TPS7B9112012 V fixed, for a rail that feeds a gate driver or a relay
No adjustable memberthe family was revised to fixed outputs only, so a board that needs an adjustable rail needs a different part
Body2.9 mm by 2.8 mm SOT-23 with five pins

Points to check before this part goes on a BOM

Nine hundred millivolt dropout is the key number on a 5 V rail. At 150 mA the input has to sit at 5.9 V or higher for the output to stay in regulation. On a 24 V bus that is irrelevant. On a 6 V rail, or on a battery that discharges towards 5.5 V, the regulator drops out and the output follows the input down, which is acceptable for a microcontroller and not for a reference.

The forty volt rating is what a 36 V bus needs. A 36 V rail with ten per cent tolerance reaches 39.6 V, inside the rating with almost no margin, and an inductive transient goes higher still. The part is specified for the bus, not for a load dump, so a transient suppressor is still worth the space on an industrial board.

One point eight microamp is the no load figure at 25 degrees. The maximum over temperature is higher, and the curve in the data sheet shows the current rising with input voltage, because the internal bias generator has to work harder at 40 V than at 5 V. A sleep budget calculated at the typical figure and a low input will be wrong at the top of the input range.

Foldback current limit protects the part and hides the fault. When the output current exceeds the limit the regulator reduces both current and voltage, so a shorted load shows as a low output rather than as a hot part. That is good for survival and it means a diagnosis has to measure the current, not only the voltage.

Seventy decibel rejection at 1 kHz falls to 43 dB at 100 kHz. That is normal for a small LDO and it matters when the rail feeds an analogue block on a board with a switching converter nearby. At the switching frequency of a typical 400 kHz converter the rejection is well down, so the LDO is not a filter for switching noise at that frequency.

The output capacitor range has a ceiling as well as a floor. The part is stable from 1 to 47 microfarad, which is a wide window but not unlimited. A board that fits a 100 microfarad capacitor to chase a transient response is outside the characterised range and can show a slow oscillation that looks like a thermal problem.

There is no adjustable member in this family any more. The data sheet revision notes record that the adjustable function was removed from the document, so a board that needs a 3.0 V or 4.5 V rail from a wide input has to use a different part or a divider on a different family. Substituting this part into an adjustable socket produces a fixed voltage and a floating feedback node.

A five pin body with no thermal pad means the board copper is the heatsink. At 24 V in and 5 V out and 150 mA the part dissipates 2.85 W, which no SOT-23 can carry. The wide input is for a light load, and the application that makes sense is a housekeeping rail at a few milliamp, not 150 mA from 24 V.

The marking identifies the voltage and nothing else. The three options share a body and a pinout and differ only in the marking and the ordering string. A mixed shelf with 37AH and 37BH reels is a real risk in a repair environment, and the difference is a 3.3 V rail on a board that expects 5.0 V.

What to confirm before this part goes on a purchase order

Confirm the fixed output voltage and the input bus together. The same family covers 3.3 V, 5.0 V and 12 V in one body, and the only visible difference on a reel is the marking.

Ask for the date code and the country of origin, and check the packing quantity. The string is published on a 3000 piece large reel, so a small repair order means a broken reel that should be agreed before the order is placed.

A last check before the offer is the load current at the top of the input range. The part is often chosen for a 40 V bus and then used at 150 mA, which is a thermal question rather than an electrical one, and a short calculation saves a board revision. A short calculation at the top of the input range, made before the reel is ordered, is cheaper than a revision after the first build.

Where this order code fits

It regulates 5.0 V at 150 mA from a 24 V or 36 V bus in a smart meter or a building controller, where the idle current has to stay under two microamp. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.

Questions buyers ask

Can it run directly from a 24 V bus? Yes, the 40 V rating covers a 24 V bus with tolerance. The limit is thermal: at 24 V in and 5 V out the part dissipates far more than a SOT-23 can carry at 150 mA, so the current has to be small or the input has to be pre regulated.

Is an adjustable version available? No. The family was revised to fixed outputs only. A board that needs a voltage between the published options needs a different part or an external divider on a family that brings the feedback pin out.

What is the minimum output capacitor? One microfarad, and the part is stable up to 47 microfarad. Below the floor the loop is not guaranteed, and above the ceiling the transient response is no longer characterised.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.