Contact Us

TPS79230DBVR

Brand: Texas Instruments
Texas Instruments TPS79230DBVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS79230DBVR — Power Management & Signal Chain | Superb Automation

TPS79230DBVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS79230DBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS79230DBVR: 3.0 V, 100 mA, 69 uV noise on the current silicon

The TPS79230DBVR is the fixed 3.0 V member of the TPS792 family from Texas Instruments, a 100 mA regulator in the five pin SOT-23 body with a 3.0 V to 3.06 V window at room temperature and an input range of 2.7 V to 5.5 V. It ships 3000 pieces per reel, marking PEYI, moisture level 1, and the addendum lists two finish variants of the same code, one with nickel palladium gold and one with tin.

This is the member where the two silicon generations separate most clearly. The legacy silicon reaches 31 microvolt RMS of noise with a 0.01 uF capacitor and 170 uA of quiescent current, while the current silicon is specified at 69 microvolt RMS and 250 uA. The rejection figures move the other way: the legacy part holds 70 dB at 100 Hz and 47 dB at 100 kHz, the current part 64 dB and 39 dB. Neither is wrong, but a board qualified on one cannot be assumed to meet the same noise budget on the other.

Key electrical data for the 3.0 V point

Output voltage3.0 V fixed, 3.0 V to 3.06 V window, 4.0 V to 5.5 V input test condition
Output current100 mA, current limit 285 mA to 600 mA on the legacy silicon
Input range2.7 V to 5.5 V, 4.0 V needed for the full accuracy window
Quiescent current170 uA typical on the legacy silicon, 250 uA on the current one
Noise31 uV RMS legacy, 69 uV RMS current silicon, both with a 0.01 uF capacitor
Rejection70 dB legacy and 64 dB current silicon at 100 Hz and 100 mA

Package, marking and reel data

BodySOT-23 DBV, 5 pins, 2.90 mm by 1.60 mm
Reel3000 pieces, large tape and reel
Finish and moisturetin or NIPDAU depending on the row, level 1, unlimited floor life
MarkingPEYI
Thermal resistance225.1 C per W on the legacy silicon, 171.7 C per W on the current silicon

Where a 3.0 V rail is the right answer

3.0 V sits between the 3.3 V logic world and the lower core rails, and it is common where a sensor or a radio front end needs a supply that is low enough to save current but high enough to keep the analog headroom. The accuracy window of 3.0 V to 3.06 V is tight in absolute terms, so a 3.0 V rail built on this part does not need a trim step, which is the practical reason it appears in instruments that ship without calibration.

The input condition in the electrical table is 4.0 V to 5.5 V, not 2.7 V, because the accuracy row is specified with headroom. Running the part from a 3.3 V bus works, and the dropout table is not the constraint at 100 mA, but the load regulation and the rejection figures are measured with the input above 4 V. A buyer who needs the published numbers at 3.3 V input should ask for the typical curves, which are plotted down to the minimum input.

Noise is the other reason to choose this family. At 69 microvolts the current silicon is about twice as noisy as the legacy part, so a 3.0 V reference for a 16 bit converter is better served by the legacy row if it can be sourced, or by a different family with a lower noise floor. For a 12 bit converter or a general analog rail the difference disappears inside the converter noise and the current silicon is the better supply because of the lower enable threshold and the wider temperature behaviour.

Buyer questions on this order code

Which silicon will I receive? The addendum lists the plain row and a suffixed row as active, and the suffix marks the current silicon. The offer states which generation is being quoted, since the noise and quiescent current differ by a factor of two and the rejection by 6 dB.

Is 3.0 V available in the six pin body? The six pin body is reserved for the adjustable member in this family. A 3.0 V rail from a six pin part means the adjustable member with a divider, which brings back the divider current and the feed forward capacitor.

What happens at 3.3 V input? The part regulates normally and the pass device sees 300 mV of headroom at 100 mA, which is inside the dropout for the family. The published accuracy row is measured from 4.0 V, so at 3.3 V input the number to carry is the load regulation row plus the line regulation over the reduced range.

Sourcing the TPS79230DBVR through SUPERB

SUPERB treats the silicon generation as part of the part number for this family. The quote names the generation, the finish and the reel size, and the incoming inspection confirms the marking and the date code against the offer before the parts go into stock. Where a programme needs the legacy noise floor and only the current silicon is available, that is stated in the reply rather than discovered at first article.

The component obsolescence management page covers how we handle a family that changes silicon under a fixed order code, and the date code management page sets out what we print on every shipment. Send the quantity and the required generation and the quote follows.