Contact Us

TPS79201DBVR

Brand: Texas Instruments
Texas Instruments TPS79201DBVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS79201DBVR — Power Management & Signal Chain | Superb Automation

TPS79201DBVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS79201DBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS79201DBVR: adjustable 1.22 V to 5.2 V, 100 mA, six pin SOT-23

The TPS79201DBVR is the adjustable member of the TPS792 line from Texas Instruments, a 100 mA regulator whose output is set by an external divider from a 1.225 V reference and can be placed anywhere between 1.22 V and 5.2 V. It comes in the six pin SOT-23 body coded DBV, which is the version that carries the feedback pin, and it ships 3000 pieces per reel at level 1 moisture class with the marking PEVI.

The family document covers two silicon generations in one file, and the electrical tables print both where they differ. That matters for a buyer because the quiescent current is 170 uA typical on the legacy silicon and 250 uA typical on the current silicon, and the enable threshold moves from 1.7 V to 0.85 V between the two. The order code rows in the addendum use a letter suffix to separate the generations, so the suffix on the reel label is the field to read when a board was qualified against one of them.

Key electrical data for the adjustable member

Output voltage1.22 V to 5.2 V set by an external divider, 0.98 to 1.02 of the set value
Reference1.225 V typical, 1.201 V to 1.25 V window, 1 uA feedback pin current
Output current100 mA, current limit 285 mA to 600 mA on the legacy silicon
Input range2.7 V to 5.5 V, output plus headroom has to stay inside it
Quiescent current170 uA typical and 250 uA maximum on the legacy silicon, 250 and 1000 on the current one
Rejection72 dB at 100 Hz and 100 mA, 75 dB at 10 kHz, 47 dB at 100 kHz on the legacy silicon

Package, marking and reel data

BodySOT-23 DBV, 6 pins, 2.90 mm by 1.60 mm, feedback pin on pin 5
Reel3000 pieces, large tape and reel
Finish and moistureNIPDAU, level 1, unlimited floor life
MarkingPEVI
Thermal resistance225.1 C per W on the legacy silicon, 171.7 C per W on the current silicon

Where an adjustable 100 mA rail earns its place

An adjustable regulator is chosen when the rail value is not settled at the time the board is released, or when the same board has to serve several products with different analog supplies. The TPS79201 covers 1.22 V to 5.2 V from one order code, so a family of instruments can share a board and set the rail with two resistors at the last assembly step. The cost of that flexibility is the divider itself: the reference pin draws 1 uA on the legacy silicon, the divider has to be low enough that this current does not shift the output, and the feed forward capacitor across the upper resistor is what keeps the transient response close to the fixed voltage members.

The other reason to pick this part is noise. With a 0.01 uF capacitor on the noise reduction pin the family reaches 31 microvolt RMS from 100 Hz to 100 kHz, and the rejection stays above 70 dB through the audio and low radio bands. That is enough for a phase locked loop reference or a low level analog front end running from a 3.3 V or 5 V bus, and it is why the part appears in radio and instrumentation bills of material rather than in general purpose digital rails.

Watch the headroom at the top of the range. At a 5.0 V output the input has to stay at least at 5.2 V if the rail is to hold, and the maximum input is 5.5 V, so a 5 V bus with 5 percent tolerance leaves almost nothing. At the bottom of the range the minimum input of 2.7 V governs instead, which is what allows a 1.22 V rail from a 3.3 V bus with the divider losses absorbed.

Buyer questions on this order code

Does the six pin body differ from the five pin one? The six pin body is the adjustable version and carries the feedback pin. The five pin body is used for fixed voltages. They share the same footprint outline but the pin functions differ, so the two cannot be swapped without changing the board.

Which silicon generation is in stock? The order code without a suffix and the suffixed row are both listed as active in the addendum. The suffix marks the current silicon, and the differences that matter are the enable threshold and the quiescent current, not the reference voltage or the pin out.

Can the output go below 1.22 V? No. 1.22 V is the reference and the lowest settable output. A rail below that needs a different part, and the power management cross reference page is the place to look for one that also keeps the same noise floor.

Sourcing the TPS79201DBVR through SUPERB

Because this order code exists in two silicon generations under one part number, SUPERB quotes it with the generation stated and the date code printed on the offer. A buyer who qualified a board against the legacy threshold gets the legacy row, and a buyer who needs the lower enable threshold gets the current row, without either side discovering the difference at first article.

For divider values and the noise reduction capacitor, the data sheet tables are the reference and the power management cross reference page lists the related fixed voltage members that remove the divider entirely. Where the schedule is the problem, BOM shortage recovery sets out how we cover a gap on a single line. Send the quantity and the rail value and the quote comes back the same day.