Contact Us

TPS62810QWRWYRQ1

Brand: Texas Instruments
Texas Instruments TPS62810QWRWYRQ1 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS62810QWRWYRQ1 — Power Management & Signal Chain | Superb Automation

TPS62810QWRWYRQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS62810QWRWYRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS62810QWRWYRQ1: a 4 A automotive step down converter in a 3 mm by 2 mm nine pin VQFN with a fixed 1.1 V output

TPS62810QWRWYRQ1 is a peak current mode synchronous buck converter with an externally set switching frequency from 1.8 MHz to 4 MHz, a 15 microamp quiescent current and wettable flanks for automated inspection in a VQFN-HR (RWY) body of 9 pins. It carries 4 A from an input between 2.75 V and 6 V, holds a fixed 1.1 V output with 1 per cent accuracy in PWM, has active output discharge on board, runs with foldback current limit off and spread spectrum off on this string, and is qualified to AEC-Q100 grade 1 from minus 40 C to 125 C ambient. Packing is 3000 pieces on a large reel at moisture level 2.

Order code and package

TPS62810QWRWYRQ1VQFN-HR (RWY) body, 9 pins, 3.00 mm by 2.00 mm with wettable flanks, 3000 pieces on a large reel, nickel palladium gold with a tin option, moisture level 2 at 260 C for one year floor life, marking 810Q, ambient range minus 40 C to 125 C
TPS6281020QWRWYRQ1the same body with a fixed 1.8 V output, otherwise the same options: discharge on, foldback off, spread spectrum off
TPS6281006QWRWYRQ1the fixed 3.3 V member of the 4 A group, which is the string a 3.3 V sensor or transceiver rail orders
TPS628100MQWRWYRQ1the adjustable member, which brings the feedback divider back onto the board and covers 0.6 V to 5.5 V
Lower current siblingsTPS62811Q, TPS62812Q and TPS62813Q are the 1 A, 2 A and 3 A members of the same family, pin to pin in the same 3 mm by 2 mm body
.A suffix rowsthe addendum repeats the strings with an .A suffix, and packing and finish are read on the row rather than taken from the suffix
Marking810Q on this string, and the four characters combine the family, the current rating and the automotive prefix

Electrical parameters that decide the application

Input voltage2.75 V to 6 V, which is the window a 3.3 V or 5 V automotive rail sits in with load dump protection ahead of it
Output voltagefixed 1.1 V on this string, with the family covering 0.6 V to 5.5 V across fixed and adjustable members
Output current4 A continuous, with low resistance switches sized so the drop across them stays small at that current in a 3 mm by 2 mm body
Accuracy1 per cent in PWM mode, which is the figure the fixed voltage strings are trimmed to
Quiescent current15 microamp typical, which is what keeps the rail alive in a module that stays powered with the engine off
Switching frequency1.8 MHz to 4 MHz set by a resistor, and the same pin accepts an external clock so several converters run in step
Modesforced PWM or PWM with power save, selected by the mode pin, and the power save mode raises efficiency at light load
Soft start and trackingthe SS/TR pin sets the ramp with a capacitor or takes an external ramp so the output tracks another rail
Power goodan open drain output with a window comparator, so it checks the upper side as well as the lower side
Enablea precision enable input that sets a user defined undervoltage lockout through a divider, which is how the rail is held off until the input is really present
Duty cycle100 per cent duty cycle mode, so the output follows the input down until the switch resistance sets the floor
Dischargeactive output discharge on this string, so the rail goes to zero when the converter is disabled
Protectionfoldback current limit is off on this string, so an overload sees a hard current limit rather than a fold back, and thermal shutdown sits behind it
QualificationAEC-Q100 grade 1, minus 40 C to 125 C ambient, with functional safety documentation available for a system level safety case

Family variants and how they differ

Current ratings1 A, 2 A, 3 A and 4 A are four strings in one body and one pin out, so a module can be re rated without a new land pattern
Fixed and adjustablethe fixed strings need no divider and hold 1 per cent, and the adjustable string brings the divider back for a rail outside the fixed set
Options per stringdischarge, foldback and spread spectrum are set per string in the comparison table, so two strings that look alike can behave differently on an overload
Spread spectrumon the strings that carry it the clock is modulated to spread the emission, which helps at the system level and costs a little ripple
Wettable flanksthe body has plated flanks so an automated optical inspection can see the solder fillet on a hidden joint, which is why the automotive strings use this outline
Body3.00 mm by 2.00 mm with nine pins, and the pin pitch is fine enough that the land pattern has to come from the package drawing rather than from a guess

Points to check before this part goes on a BOM

The output on this string is fixed at 1.1 V. That removes the divider and the noise it injects, but it also means the rail cannot be moved by a resistor change, so a board that needs 1.2 V orders the 1.2 V string rather than fitting a divider.

Discharge, foldback and spread spectrum are per string. This one has discharge on and the other two off, so a substitution inside the family is not automatically a drop in even when the current rating and the voltage match.

4 A in a 3 mm by 2 mm body is a copper problem. The thermal path is the pins and the ground plane under them, and the data sheet thermal table is written for a board with several square centimetres of copper on the ground layer.

The frequency pin accepts an external clock. In a module with a radio or an audio path that is the difference between a beat note and a clean spectrum, and the same pin sets the free running frequency when no clock is present.

AEC-Q100 grade 1 is an ambient rating. The junction runs hotter, and the thermal calculation has to use the junction temperature rather than the 125 C ambient figure.

Why an adjustable frequency above the audio band

The converter can be set anywhere from 1.8 MHz to 4 MHz, which keeps the switching fundamental and its first harmonics above the AM band and above the audio band. That is the reason automotive modules rarely run this class of converter below 1.8 MHz even when a lower frequency would give better efficiency.

Synchronising to a system clock removes the beat between converters on the same board. Two converters running at slightly different frequencies produce a difference tone that moves with temperature, and a module with a radio receiver will hear it as a whistle that comes and goes.

Where this order code fits

The part suits an infotainment head unit, a camera module, a cluster or an ADAS controller, where a 3.3 V or 5 V rail has to come down to a 1.1 V processor core at 4 A. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.

Questions buyers ask

Is this part qualified for automotive use? Yes. The document carries AEC-Q100 grade 1 qualification with a minus 40 C to 125 C ambient range, and functional safety documentation is available to support a system level safety case.

Can the output be changed to 1.2 V? Not on this string. The output is set inside the package at 1.1 V, so a 1.2 V rail needs the 1.2 V string or the adjustable member of the family.

What has to match when substituting within the family? The current rating, the output voltage, and the three options that are set per string: output discharge, foldback current limit and spread spectrum. A part with the same body and a different option set is not a drop in.

How is the switching frequency set? By a resistor on the frequency pin, from 1.8 MHz to 4 MHz, and the same pin takes an external clock when the converter has to run in step with the rest of the board.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Supplier Quality Audit page sets out the checks that keep a substitute from failing on the bench.