Contact Us

TPS56637RPAR

Brand: Texas Instruments
Texas Instruments TPS56637RPAR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS56637RPAR — Power Management & Signal Chain | Superb Automation

TPS56637RPAR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS56637RPAR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS56637RPAR: 4.5 V to 28 V input, 6 A synchronous buck in a small body

TPS56637RPAR is a wide-input synchronous step-down converter with integrated MOSFETs in a VQFN body of 10 pins. It takes 4.5 V to 28 V at the input, delivers 6 A from 0.6 V to 13 V, uses 26 milliohm and 12 milliohm switches at a fixed 500 kHz, and holds a 0.6 V reference at plus or minus 1 percent with D-CAP3 control that needs no external compensation.

Order code and package

Ordering stringTPS56637RPAR, RPA package, tape and reel
Package10-pin VQFN with thermal pad
Ambient rangeJunction -40 C to 150 C
Thermal resistance49.1 C/W junction to ambient in this package
Reference0.6 V at plus or minus 1 percent

Electrical parameters that decide the application

Input range4.5 V to 28 V
Output range0.6 V to 13 V
Output current6 A continuous
Switch resistance26 milliohm high side, 12 milliohm low side
Frequency500 kHz fixed
Quiescent current140 microamp operating, 2 microamp in shutdown
Soft start2 ms internal, no external capacitor

Points to check before this part goes on a BOM

A 28 V input rating covers a 24 V industrial rail with margin and a 19 V notebook brick directly. The switch pair is the reason the part is efficient at that voltage: 26 milliohm on the high side is low enough that 12 V to 5 V at 6 A does not turn the top switch into the main heat source. At 24 V to 5 V the duty cycle is 21 percent, the high side conducts for a fifth of the period, and the low side carries the rest at 12 milliohm.

49.1 C/W junction to ambient is a package number, and it is honest about the limit. At 6 A into 5 V from 12 V the conduction loss in the switches is about 0.6 W before switching, so the junction sits roughly 30 C above ambient on a board that gives the pad a normal amount of copper. That leaves room at 60 C ambient and very little at 85 C with no airflow, which is why the part is specified to 150 C junction rather than to a comforting ambient figure.

The 2 ms internal soft start removes a component and a decision. In a hot-plug situation, where the input appears as a step because a connector makes contact, the input capacitor charges through the converter's own ramp and the inrush is bounded without a external capacitor value to choose. It also means the start-up time cannot be slowed down, which matters for a rail that has to come up after another rail.

140 microamp of operating quiescent current is a working figure for a converter that is switching, and 2 microamp is with the enable low. In a product that leaves the 24 V rail present and disables the output, 2 microamp is 17.5 mAh a year, which is negligible; in a product that keeps the converter enabled at no load, the 140 microamp and the switching losses are what set the standby budget, so light-load mode matters more than the shutdown number.

The MODE pin selects Eco-mode or forced continuous conduction, and the two modes produce different behaviour at light load rather than different efficiency at full load. Eco-mode drops the frequency and lets the output ripple grow; forced continuous holds the frequency and the ripple and burns the difference. A rail feeding a measurement front end wants the second, a rail feeding a relay or an LED string wants the first.

Non-latched protection on undervoltage, overvoltage, overtemperature and input undervoltage means the converter restarts by itself once the condition clears. In an industrial cabinet where the 24 V rail dips during a contactor event, that is the desired behaviour; on a board where a restart must be recorded, the power-good output is the signal to latch in the supervisor logic.

The 500 kHz fixed frequency is high enough to keep the inductor small and low enough to keep the switching loss modest at 24 V in, and it is the number that sets the inductor value: at 24 V to 5 V the ripple in a 4.7 microhenry part is about 40 percent of 6 A, which is where the output capacitors and the current limit both want it. A substitution to a smaller inductor raises the ripple, the core loss and the peak current at the same time, so the limit trips earlier on a load step even though the DC current is unchanged.

Where this order code fits

It fits a 12 V, 19 V or 24 V bus that needs a 5 V or 3.3 V rail at up to 6 A in an industrial controller, a display, a set-top box or a network appliance, where the input can be far above the output. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.

Questions buyers ask

Can the output go above the input? No, it is a step-down converter. The 0.6 V to 13 V output range describes what the loop can regulate when the input is above it, and the dropout region at the top of that range passes the input through rather than boosting it.

Is 6 A the limit at 28 V in? The current limit is cycle by cycle on the low side, and the 6 A figure is the continuous rating. At 28 V in the duty cycle is small, the high-side on time is short, and the practical limit becomes the minimum controllable on time rather than the current.

What happens if the MODE pin is left floating? It is a logic input and has to be tied to a defined level. Floating it leaves the light-load mode undefined, so two boards from the same build can behave differently in standby without any component difference.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.