Contact Us

TPS3803G15DCKR

Brand: Texas Instruments
Texas Instruments TPS3803G15DCKR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS3803G15DCKR — Power Management & Signal Chain | Superb Automation

TPS3803G15DCKR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS3803G15DCKR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS3803G15DCKR fixed 1.4 V voltage detector with an open drain output

The TPS3803G15DCKR is the fixed threshold member of the same family as the adjustable TPS3803-01. It compares the supply against an internal 1.4 V divider and pulls its open drain output low when the rail falls below 1.379 V, so there is no divider to place, no resistor tolerance to add and no sense pin to protect. The body is a 5 pin SC-70 and the supply current is 3 microamp.

The order code says almost everything about the part. G15 is the fixed 1.4 V option, DCK is the SC-70 5 pin body and R is the large reel. The same document covers the adjustable 01 member and the dual rail TPS3805H33, and the three differ in the number of sense inputs and in whether the threshold comes from an internal divider. On the G15 the sense pin becomes a no connect, which is the physical difference between this part and its adjustable sibling.

Key parameters taken from the TPS3803 document

Monitored threshold1.4 V nominal, printed as 1.379 V minimum and 1.421 V maximum, which is 1.5 per cent either way
Threshold sourceInternal divider, so no external resistors and no sense pin
Hysteresis15 mV on this threshold, since it sits between 1.2 V and 2.5 V in the table that splits the two windows
Supply current3 microamp typical at 3.3 V, which is the same figure as the adjustable member
OutputOpen drain active low, one pull up resistor required, and the pull up rail may be higher than the monitored rail
Response time5 microseconds minimum and 100 microseconds maximum from the supply to the reset output
Supply floorThe output is defined while the supply is above 1.1 V, which is the level the reset has to be trusted down to
TemperatureMinus 40 to plus 85 degrees C
PackageSC-70 5 pin, DCK body, 3000 pieces on a large reel for the R carrier and 250 on the T carrier
Pin countFive pins: no connect, ground, reset, supply and the fifth pin that is a no connect on this member

The 1.4 V threshold is an unusual number and it is the reason the part exists. It sits below a 1.5 V rail and above a 1.2 V rail, so it can watch a 1.5 V supply that is allowed to sag, or act as a low battery warning on a two cell alkaline product whose end point is around 1.4 V. An engineer with a 1.8 V rail should be using the E18 option of the supervisor family rather than this part, because a 1.4 V trip point leaves far too much room for a 1.8 V regulator to fall before anything is reported.

Where the numbers matter in a real build

The narrow hysteresis is the first thing to test on a bench. Fifteen millivolts on a 1.4 V threshold is about one per cent, which is enough to reject the ripple of a linear regulator and not enough to reject the ripple of a switching one. On a rail with 30 mV of ripple the output will follow the ripple rather than stay clean, and the pull up value then decides how much of that appears at the logic input.

The second number is the open drain pull up. Because the output only sinks 25 milliamps at most on the larger of the two families and considerably less here, the pull up has to be sized from the sink current at the low level that the receiving input needs. A 100 kohm pull up to 3.3 V gives 33 microamp at zero volts, which is well inside the capability, and the rise time into 50 picofarad of trace is a few microseconds, which is fine for a static flag and too slow for anything counting edges.

The third point is what the part does not have. There is no delay, no manual reset and no watchdog, so a processor that needs to be held in reset while an oscillator settles cannot use it. The 100 microsecond response is a filter against a fast glitch, not a reset timer.

What to check before a purchase order is released

  • The threshold against the rail, because 1.4 V only suits a rail whose floor is around that level.
  • The hysteresis against the ripple of the supply, since 15 mV is narrow for a switching regulator.
  • The pull up resistor and its rail, both of which are board decisions rather than part decisions.
  • The no connect pin, because a board laid out for the adjustable member has a divider landing on a pin that does nothing on this part.
  • The reel size, since 3000 pieces is a production quantity and a prototype line usually wants the 250 piece carrier.
  • The 85 degree temperature rating, which excludes under bonnet and outdoor cabinets.

Which projects this part fits

The vendor lists the same applications as the rest of the family: DSP, microcontroller and microprocessor equipment, wireless systems, portable and battery powered products, programmable controls, instruments, industrial equipment, computers and automotive systems. The threshold makes it a natural low battery flag on a two cell product and a rail monitor on a 1.5 V supply, and the 3 microamp current keeps it inside a budget that a coin cell can support.

Questions that come up before a purchase order is released

Can the threshold be adjusted?

No. The G15 threshold comes from an internal divider. Moving it means the adjustable 01 member and two external resistors.

Is the part pin compatible with the adjustable member?

Electrically the bodies are the same, but the sense pin is a no connect here, so a board built for the adjustable member has a divider that drives nothing and a threshold that no longer follows it.

How fast does the output react?

Within 100 microseconds of the supply crossing the threshold at the maximum, and as fast as 5 microseconds typically. That is a glitch filter, not a reset delay.

What happens below 1.1 V?

The output state is not guaranteed, so the pull up resistor is what holds the line high or the receiving device is what defines the state. A board that needs a defined level during a deep discharge needs an external arrangement.

How SUPERB handles this line

Fixed threshold detectors are ordered against a drawing that already names a value, so the useful service is a footprint comparison and a partial reel rather than a broad catalogue. Our pin to pin cross reference covers the 5 pin detector and supervisor families that share a body, and the drop in replacement checklist covers the checks that decide whether a substitute behaves the same on a running board. When a product is running out of a part that is no longer stocked, the obsolete part cross reference hub is the first stop.