Contact Us

TPS3803-01DCKR

Brand: Texas Instruments
Texas Instruments TPS3803-01DCKR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS3803-01DCKR — Power Management & Signal Chain | Superb Automation

TPS3803-01DCKR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS3803-01DCKR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS3803-01DCKR adjustable voltage detector with an open drain output

The TPS3803-01DCKR is the adjustable member of a small voltage detector family from Texas Instruments. Its sense input is compared against an internal reference, and the divider that sets the trip point is two resistors on the board, so one part can watch any rail a customer chooses. The output is open drain and active low, and the whole device sits in a 5 pin SC-70 and draws 3 microamp.

The 01 in the string is the adjustable option and it is the difference that matters. The TPS3803G15 member of the same document has a fixed 1.4 V threshold set by an internal divider and no sense pin at all, while the TPS3805 member carries a second, adjustable sense input for a dual rail board. All three share the same 5 pin body, the same reference accuracy and the same open drain behaviour, so the choice between them is a choice about how many rails are watched and whether the threshold is fixed.

Key parameters taken from the TPS3803 document

FunctionSingle voltage detector with an adjustable sense input, no watchdog and no manual reset
Threshold accuracy1.5 per cent on the sense threshold, which is tighter than the 2 to 2.5 per cent of the supervisor families around it
Hysteresis15 mV for thresholds between 1.2 V and 2.5 V, and 30 mV above 2.5 V, both quoted with the output high at the supply
Supply rangeRuns from the rail under test at 1.2 V and above, with the reset defined down to a 1.1 V supply
Supply current3 microamp typical at 3.3 V
OutputOpen drain, active low, so a pull up resistor is part of the circuit and the pull up rail can be a different voltage
Response time5 microseconds minimum and 100 microseconds maximum propagation from the supply or the sense input to the reset output
TemperatureMinus 40 to plus 85 degrees C
PackageSC-70 5 pin, the DCK body
Order rows3000 pieces on a large reel for the DCKR carrier, with the DCKT small reel available on the same body
Family membersTPS3803-01 adjustable, TPS3803G15 fixed 1.4 V, TPS3805H33 dual rail with an adjustable second input

The response time row is the one that separates a detector from a supervisor. A maximum of 100 microseconds means the output follows the rail almost immediately, so there is no hold time for an oscillator to settle and no defined delay after the rail recovers. A board that needs the processor to stay in reset for 200 ms needs the supervisor families, not this part.

Where the numbers matter in a real build

The divider is the whole circuit, and its tolerance lands directly on the trip point. With a 1.5 per cent reference and two 1 per cent resistors, the trip point is good to about 2.5 per cent before temperature is counted. Substituting 5 per cent resistors because the reference is accurate is a common mistake, and it turns a precise detector into a rough one.

The second number is the divider current. At 3 microamp of supply current, a divider that draws 100 microamp is thirty times the cost of the part it serves. Sizing the divider at 1 to 3 microamp keeps the budget honest, and the sense input leakage then becomes the limit on how high the resistors can go, particularly in a humid cabinet where surface contamination adds a parallel path.

The third is the open drain output and its pull up. Because the output only sinks, the pull up can go to the logic rail of the device being driven, which lets a 1.2 V detector drive a 3.3 V input. The rise time of that pull up into the trace capacitance is what decides whether the edge is clean, and a 1 megohm pull up on a long trace is a slow edge that a Schmitt trigger input will tolerate and a plain gate will not.

What to check before a purchase order is released

  • Whether the drawing needs an adjustable threshold or a fixed one, because the G15 member of the same family has no sense pin.
  • The two divider resistors and their tolerance, which together set the trip point and its drift.
  • The pull up resistor and its rail, since the output is open drain and cannot drive anything without one.
  • The hysteresis against the ripple of the rail being watched, because 15 mV is narrow on a switching supply.
  • The response time, since a part that follows the rail in 100 microseconds cannot hold a processor in reset.
  • The temperature rating of 85 degrees C, which rules out most under bonnet and outdoor work.

Which projects this part fits

The vendor lists equipment built around DSPs, microcontrollers and microprocessors, wireless communication systems, portable and battery powered equipment, programmable controls, intelligent instruments, industrial equipment, computers and automotive systems. The adjustable sense input makes it useful on a board that watches a rail the vendor never printed a fixed option for, and the 3 microamp current makes it useful on a product that sleeps more than it runs.

Questions that come up before a purchase order is released

Can the trip point be set below 1.2 V?

The sense input is specified against a reference rather than a rail, so the practical floor is set by the reference and by the leakage of the divider. Below 1.2 V the hysteresis rows change and the circuit has to be checked against the table rather than assumed.

Is a reset delay available?

No. The propagation delay is microseconds, and the output follows the sense input. A product that needs a hold time needs a supervisor.

What is the difference between the 01 and the G15 members?

The 01 member has an adjustable sense pin and needs two external resistors. The G15 member has a fixed 1.4 V threshold from an internal divider and its sense pin is a no connect.

Can two detectors share one pull up?

Yes, because the outputs are open drain and wired OR behaviour is the reason the output type exists. The combined line is low when either detector trips.

How SUPERB handles this line

Small detectors are usually specified late in a project, when the rail list is already fixed, so the sourcing question is often whether an adjustable part can cover a threshold that no fixed option offers. Our pin to pin cross reference covers the 5 pin SC-70 detector and supervisor families that share a footprint, and the power management cross reference lists what each of them replaces on an older board. Where a part is being carried for a product that is no longer in production, the obsolete part cross reference hub is the first stop.