Contact Us

TPS3801E18DCKR

Brand: Texas Instruments
Texas Instruments TPS3801E18DCKR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS3801E18DCKR — Power Management & Signal Chain | Superb Automation

TPS3801E18DCKR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS3801E18DCKR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS3801E18DCKR 1.8 V supply supervisor with a 200 ms reset delay

The TPS3801E18DCKR monitors a 1.8 V rail and holds a processor in reset until that rail is above its threshold, then releases the reset after 200 ms. It carries a manual reset input, a push pull active low output and a 5 pin SC-70 body, and it draws 9 microamp while it does the job. The part sits in the small corner of a board where the processor, the crystal and the reset line meet.

The family is organised around the delay, not around the voltage. TPS3800 members release after 100 ms, TPS3801 members after 200 ms and TPS3802 members after 400 ms, and each of them is offered against 1.8 V, 2.5 V, 2.7 V, 3 V, 3.3 V, 5 V and an adjustable threshold. The E18 in this string is the 1.8 V option, whose threshold window is printed as 1.67 V minimum, 1.71 V typical and 1.75 V maximum.

Key parameters taken from the TPS380x document

Monitored rail1.8 V option, threshold 1.67 V minimum, 1.71 V typical, 1.75 V maximum
Reset delay200 ms, fixed inside the device, selected by the TPS3801 family name
Threshold accuracy2 to 2.5 per cent overall, achieved from an internal reference rather than a divided supply
OutputPush pull, active low, so no pull up resistor is needed and the pin cannot be wire ORed with a second source
Manual resetInput fitted on this member, a low level forces the reset active. The TPS3801-01 adjustable member is the one without it
Supply current8 microamp typical and 11 microamp maximum at 1.6 V, which is the figure that decides a battery budget
Supply voltageRuns from the rail it supervises, with the reset output defined down to 1.1 V
TemperatureMinus 40 to plus 85 degrees C
PackageSC-70 5 pin, also printed as SOT-323, about half the footprint of a 5 pin SOT-23
Order rowsThe DCK body ships 3000 pieces on a large reel, and the DCKT carrier is the 250 piece small reel of the same silicon
LifecycleActive in the current addendum, with the family revised in 2010 from a document first issued in 1999

Two rows in the vendor addendum deserve a look. The DCK rows printed in this revision include the 50, 33 and 30 members of the family with their own part numbers, and the packaging table prints the reel quantities per body rather than per voltage option. On a purchase order that means the string has to be written exactly as the drawing names it, because the same body carries six threshold options and three delay options.

Where the numbers matter in a real build

The threshold window of 1.67 V to 1.75 V is the first thing to place against the rail. A 1.8 V regulator at minus 5 per cent is 1.71 V, which is exactly the typical threshold, so a supply that is inside its own tolerance can still sit on the supervisor trip point. The window is deliberate: the part is meant to assert when the rail leaves regulation, and an engineer who needs margin has to take it from the regulator rather than from the supervisor.

The 200 ms delay is the second. It is long enough that a processor which boots in 20 ms still waits, and short enough that a user pressing a reset button sees an instant response. The 400 ms member exists for products with a large bulk capacitor that takes longer to charge, and the 100 ms member for products that wake from a battery and cannot afford the wait.

The third number is the supply current. At 8 microamp typical the supervisor is not the largest load on a standby rail, but it is not free either. On a product that keeps a 1.8 V rail alive for a real time clock, the supervisor and the clock together define the shelf life budget, and a part with a 50 microamp ceiling would double it.

What to check before a purchase order is released

  • The delay family, because 100, 200 and 400 ms parts share a footprint and differ only in the name.
  • The threshold option, since E18 is 1.8 V and the same body also monitors 2.5, 2.7, 3, 3.3 and 5 V.
  • The manual reset input, which this member has and the adjustable member does not.
  • The push pull output, because a board that ties two reset sources together needs an open drain part instead.
  • The reel size, since the SC-70 body ships 3000 on a large reel and 250 on a small one, and a prototype build rarely needs 3000.
  • The temperature rating of 85 degrees C, which is below what an automotive or outdoor cabinet asks for.

Which projects this part fits

The vendor lists equipment built around DSPs, microcontrollers and microprocessors, wireless communication systems, portable and battery powered equipment, programmable controls, intelligent instruments, industrial equipment, computers and automotive systems. In practice the part appears wherever a 1.8 V core rail has to come up in a defined order behind a 3.3 V rail, and where the board has no room for a larger supervisor package.

Questions that come up before a purchase order is released

Does the manual reset input need external parts?

A push button on a long trace benefits from a capacitor and a series resistor, because the input is a comparator and a slow edge can sit in the undefined region. On a short trace with a clean switch, the internal pull arrangement is enough.

Can the delay be changed on the board?

No. The delay is set inside the device by the family name. Changing it means ordering the TPS3800 or TPS3802 member, which is the same footprint and a different string.

What happens if the 1.8 V rail never comes up?

The reset stays asserted for as long as the supply to the supervisor is above 1.1 V, which keeps the processor in a known state instead of letting it start on a rail that is not there.

Is the output strong enough to drive a processor reset pin directly?

Yes. The push pull output is specified to sink and source at logic current levels, so a direct connection to a reset pin is the normal arrangement.

How SUPERB handles this line

A 5 pin supervisor is a cent level part that can still stop a production line when the 3000 piece reel is not in stock, so the useful work is a cross reference and a partial reel rather than a catalogue listing. Our pin to pin cross reference covers the supervisor families that share a footprint, and the power management cross reference lists the wider set of parts this one is compared with. When a board is running out of an older supervisor, the obsolete part cross reference hub is where we start.