Contact Us

TPS3703A5330DSER

Brand: Texas Instruments
Texas Instruments TPS3703A5330DSER is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS3703A5330DSER — Power Management & Signal Chain | Superb Automation

TPS3703A5330DSER

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS3703A5330DSER from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS3703A5330DSER 3.3 V window reset IC with a 5 per cent window

The TPS3703A5330DSER is the 3.3 V member of the same family as the 1.8 V part, with the same fixed plus or minus 5 per cent window and the same six pin body. It watches a 3.3 V rail and asserts a reset when the rail leaves the window in either direction, so a supply that climbs too high is caught as well as one that sags. No divider is needed, and the thresholds are trimmed at the factory to 0.25 per cent typical accuracy.

The delay option on this string is the A, which gives 10 ms with the CT pin open and 200 ms with CT tied to the supply. The 330 in the middle is the 3.30 V rail, and the 5 before it is the window. A 3.3 V rail is the most common in industrial equipment, which is why this member is stocked more widely than the low voltage ones, and it is also the one that most often replaces a discrete divider plus comparator arrangement.

Key parameters taken from the TPS3703 document

Monitored rail3.30 V nominal with a plus or minus 5 per cent window, so 3.135 V and 3.465 V
Supply range1.7 V to 5.5 V, so the part is powered from the same 3.3 V rail it watches or from a 5 V rail
Threshold accuracy0.25 per cent typical, 0.7 per cent over the full temperature range
Quiescent current4.5 microamp typical, 7 microamp maximum
Delay10 ms with CT open and 200 ms with CT tied to the supply, or a capacitor selected value
OutputsOpen drain active low RESET plus a second reset output for a latched indication
Manual resetMR pin, active low
Glitch immunityInternal filter and hysteresis, so a load transient does not produce a reset
SENSE and VDDSeparate pins, which allows the part to run from 5 V while watching 3.3 V
TemperatureMinus 40 C to 125 C
PackageWSON-6, 3000 pieces on a large reel, nickel palladium gold or palladium gold finish depending on the row, moisture level 2, marking J8

The 3.3 V rail and the 3.3 V supply are usually the same net, so SENSE is tied to VDD on most boards. That is allowed and it is the simplest arrangement. It also means the reset output loses its reference at the same moment the rail falls, which is acceptable for a reset that is meant to hold a processor down.

Where the numbers matter in a real build

The window on a 3.3 V rail is 330 mV either side, which is generous compared with a core rail. The interesting part is the accuracy: 0.7 per cent over temperature is 23 mV, so a monitor set at 3.135 V trips somewhere between 3.11 V and 3.16 V. A load that pulls the rail to 3.15 V during a transmit burst will reset on some parts and not on others, which is exactly the kind of fault that appears only in the field.

The second point is the 200 ms delay. On a board with a 3.3 V rail that takes 50 ms to rise, the 10 ms default is short enough that the processor can be released before the rail is settled, and the first instruction fetch then fails. Tying CT to the supply costs nothing and moves the release point to a safe place.

The third is the second reset output. A latched indication that survives the fault is useful in a product that has to report why it restarted, and this family brings it out on a separate pin. Boards that only wire the active low reset lose that diagnostic.

What to check before a purchase order is released

  • The exact string, because A5330 and A4330 differ only in the window and the marking is the only visible clue.
  • The delay option against the rail rise time on the actual board, not on the bench supply.
  • The pull up on both reset outputs if both are used, since both are open drain.
  • Whether SENSE is tied to VDD or wired to the rail through a separate track, because the two behave differently at power down.
  • The moisture level and floor life against the reflow schedule on the line.
  • The rail's load transients against the window plus the accuracy, because a monitor inside the transient band resets a healthy board.

Which projects this part fits

The vendor lists motor drives, factory automation and control, home theatre, grid infrastructure and data centre equipment. The 3.3 V member suits an industrial controller with a 5 V input and a 3.3 V logic rail, where the processor has to be held down until the rail is inside its own tolerance and released with a defined delay.

Questions that come up before a purchase order is released

Does this part replace a discrete supervisor and divider?

Yes, and it removes the divider tolerance from the window. A discrete arrangement with 1 per cent resistors has a window that moves twice as much as this part's over temperature.

Can the overvoltage side be disabled?

Not on this member. The family has a UV only option under a different order code, and a board that only cares about brown-out should be ordered against that string.

What is the difference from the 1.8 V member?

Only the trimmed threshold and the marking. The body, the delay options, the accuracy and the output arrangement are the same.

Does the part work below 1.7 V?

No. The undervoltage lockout at 1.7 V stops the part from producing a defined output below that, so a rail that is expected to sit near 1.7 V needs a different device.

How SUPERB handles this line

A 3.3 V supervisor is often the last part added to a board and the first one that has to be substituted when a reel runs short, so the window step matters more than the price. Our power management cross reference lists the family members side by side with their window and delay codes, and our BOM shortage recovery covers what we do when only a neighbouring window step is available. Our date code management explains how we handle a part with a one year floor life on a line that builds in campaigns.