Contact Us

TMS320LF2401AVFS

Brand: Texas Instruments
Texas Instruments TMS320LF2401AVFS is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TMS320LF2401AVFS — Power Management & Signal Chain | Superb Automation

TMS320LF2401AVFS

Texas Instruments — Power Management & Signal Chain

Product Overview

The TMS320LF2401AVFS from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TMS320LF2401AVFS: the second 32-pin LQFP order code of the same 40 MHz DSP controller

TMS320LF2401AVFS is a small fixed point DSP controller in the alternate 32-pin order code in a LQFP body of 32 pins. It is the same LF2401A silicon as the VFA code, ordered as the VFS line in the addendum. The core, the memory and the converter are identical: 40 MHz, 8K by 16 of flash, 544 words of dual access RAM and a 10-bit five channel converter in a 32-pin body.

Order code and package

Order codeTMS320LF2401AVFS
Package32-pin LQFP, VF body, 7 mm by 7 mm
Packingtray or reel according to the addendum line
CoreC2xx DSP core at 40 MHz, 25 ns instruction cycle
Memory8K by 16 flash, 544 words DARAM and 512 words SARAM
Analogue10-bit converter with 5 multiplexed inputs
Difference from VFAa separate addendum line, so a separate part number on the order

Electrical parameters that decide the application

Performance40 MIPS at 40 MHz
ADC10-bit, 5 channels, 500 ns minimum conversion
Serialone SCI asynchronous port
I/Oup to 13 multiplexed general purpose pins
Supplysingle 3.3 V rail
Clockphase locked loop with an external crystal
Timerswatchdog and event manager timers

Family variants and how they differ

VFAthe A grade 32-pin LQFP listed first in the addendum
VFSthe second 32-pin LQFP line, the part on this page
LF2401Aflash program memory
LC2401Amask ROM version for frozen programs

Points to check before this part goes on a BOM

Two order codes for one die is common in this generation and it confuses purchasing: VFA and VFS are both 32-pin LQFPs of the same device, and the difference sits in the addendum fields rather than in the silicon. A requisition that quotes the wrong one can sit on allocation while the other is in stock.

The program space is 8K by 16 bits. A fixed point current loop, a serial protocol and a small state machine fit; a bootloader plus application plus calibration table has to be counted in the linker map before the first prototype, not after the code is written.

The converter has five channels and one sample and hold, so the three phase currents of a motor are measured in sequence. The skew between channels is a known quantity and can be compensated in the loop, but only if the firmware knows the conversion order and the trigger source rather than assuming simultaneity.

The 32-pin body is the constraint that makes the part useful: it fits inside small housings. The cost is that the serial port, the PWM outputs and the analogue inputs share pins, so the function mix is fixed by the package before the drawing starts.

At 40 MHz the instruction cycle is 25 ns, which is slow by later standards and still adequate for a 20 kHz current loop with a simple controller. The limit appears when a product wants two loops, a field bus and a display; that combination belongs on the larger devices in the family.

The single 3.3 V rail keeps the part count low, and it also means the analogue input range is the rail. A shunt amplifier that outputs 5 V has to be divided down, and the divider spends resolution that a 10-bit converter cannot spare. Products that need a wide current range usually add a second gain stage rather than accept the loss.

Long term supply is the practical question. The device has been in production since the early 2000s, and the aftermarket for it is real but uneven. A support plan should include a last time buy quantity and a documented alternative device number, because a board that depends on a single 32-pin part with no second source eventually stops being repairable.

The crystal and the loop filter are the only external clock components, and they sit close to the device in a small module where the switching node of a motor driver is also close. Placement and guarding of that oscillator is part of making the product work, and it is usually discovered on the second prototype rather than the first.

Two order codes on one die is a purchasing problem more than an engineering one. A requisition that quotes the code which is on allocation while the other is in stock costs weeks, and the substitution needs a documented approval because it changes the qualified configuration of the product even when the silicon is identical.

The program space of 8K words is the limit that decides whether a product belongs on this device. A fixed point current loop, a serial protocol and a small state machine fit; a bootloader, a calibration table and a logging buffer do not, and the linker map is the only way to know which side of that line a product is on.

The 3.3 V rail sets the analogue range as well as the supply. A shunt amplifier that outputs 5 V has to be divided down, and the divider spends resolution that a 10-bit converter cannot spare. A product with a wide current range usually adds a second gain stage instead.

The clock circuit is a crystal and a loop filter, and in a small module the motor switching node is close by. Placement and guarding of that crystal is part of making the product work, and it is the item most often found on the second prototype rather than the first.

For a repair order the code on the original drawing is the one to use. Substituting the other 32-pin code changes the grade or the packing field, and a product that is audited for configuration control cannot absorb that change without a record.

The converter and the PWM share the same package pins as the serial port, so the function mix is fixed at the drawing stage. A product that later wants a second serial port or a tachometer input usually moves to the 64-pin body, and the change is a board spin with the same firmware.

Packing is part of the order code on this device: the same 32-pin flat pack is supplied in trays for hand assembly and on reels for an automated line. A purchase order that omits the packing field gets whatever the distributor has, and a hand assembly bench with a reel needs a feeder. A product that has grown past the 8K of program space should move to the next device in the family rather than compress the application, because the compression costs engineering time on every release and the pin compatible options in this generation are limited.

Where this order code fits

It is used in the same small modules as the VFA code: fan and pump drives, actuators and appliance controllers with a 32-pin budget. Teams comparing it with a neighbouring part start from our MCU Cross Reference page, and teams replacing a part that has gone end of life start from the Component Obsolescence Management page.

Questions buyers ask

Is VFS a different device from VFA? No. It is the same die and the same 32-pin body, listed as a separate line in the package addendum with its own grade and packing fields.

What is the flash size? 8K by 16 bit words, 16 kilobytes, the same as the VFA code.

Can it run from 5 V? No. The supply is 3.3 V. A 5 V system needs a regulator and level shifting on any 5 V input.

Which code should a repair order use? The one printed on the original assembly drawing. Substituting the other code changes the qualified configuration of the product even when the silicon is the same.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Last-Time-Buy and LTB Planning page sets out the checks that keep a substitute from failing on the bench.