ISO7241CQDWRQ1
Product Specifications
ISO7241CQDWRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The ISO7241CQDWRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ISO7241CQDWRQ1: three channels out and one back
The ISO7241CQDWRQ1 is the member of the ISO724x family that carries three forward channels and one reverse channel in a 16 pin wide body. That map is what a field interface usually needs: three commands or a clock and two data lines going out, and one fault or ready line coming back. Putting the return channel in the same package avoids the second isolator that a four channel all forward part would need.
The C letter marks the 25 Mbps member of the family. The same die is released as an M member at 150 Mbps, so the speed choice is made at the order code and not at the footprint. Propagation delay on the C member is 18 ns typical and 42 ns maximum at 5 V, and pulse width distortion is 2.5 ns typical, which keeps a 12.5 MHz clock clean enough for a serial frame.
Isolation is 2500 VRMS for one minute under UL 1577, with the VDE and CSA certificates carried by the same family. Each side runs from its own rail, 3.3 V or 5 V, and the part translates across the barrier. Both sides carry an output enable, so two controllers can share one set of isolated lines and put the other side into high impedance during a switchover.
Key data for the ISO7241CQDWRQ1
| Channels | Four in total, three forward and one reverse, with enable pins on both sides |
| Data rate | 25 Mbps on the C member, with a 150 Mbps M member in the same body and pin map |
| Isolation | 2500 VRMS for 60 s per UL 1577, with VDE and CSA certification on the same barrier |
| Supply | 3.3 V or 5 V on each side, with level translation across the barrier |
| Timing | Propagation delay 18 ns typical and 42 ns maximum at 5 V, pulse width distortion 2.5 ns typical |
| Enable path | Enable and disable delays are longer than the data path, so a switchover costs more than one bit period |
| Default state | Outputs follow the input during normal operation and hold the last valid state through a short supply dip |
Body, packing and order code data
| Body | SOIC DW, 16 pins, wide body, the outline shared with the rest of the ISO724x group |
| Published rows | The addendum prints ISO7241CDW and ISO7241CDWR, the second at 2000 pieces on a 330 mm reel |
| Q1 string | The Q1 suffix on this page is not printed as a row in the industrial addendum, so the qualified release has to be confirmed separately |
| Temperature | Minus 40 C to plus 125 C on the published rows |
| Finish | NIPDAU on the reel row, moisture level 2, 260 C peak, one year floor life |
What to settle before the order goes out
Two things decide whether this string ships without a query. The first is the top level string. The industrial document prints the plain and the R rows, not the Q1 row, and a qualified release usually comes with its own document, its own grade and its own marking. That has to be confirmed from the vendor or from a ship record before a schedule is promised to a customer.
The second is the reel. The DW row ships 2000 pieces on a 330 mm reel while the plain DW row ships in a tube. A line that has been set up for a feeder needs the R row on the order, and a prototype that will be hand placed is better served by the tube. Our component lead time solutions page covers how we handle a part whose string needs confirmation, and the pin to pin cross reference page is where a substitution check starts.
Where a three and one map is used
Field IO blocks use this part for a chip select, a clock and a data line going out, and a fault line coming back. Motor control uses it for two gate signals and an enable going out, and a fault coming back. Instrument front ends use it for a serial port where the transmit pair and the request line go out and the acknowledge comes back.
The reverse channel is not a mirror of the forward ones. It sits on the opposite side of the barrier with its own buffer, so its delay is specified separately and its default state is set by the same F or plain choice as the rest of the die. A board that assumes symmetry between the directions will see a few nanoseconds of mismatch, which matters only when the reverse line is part of a timing critical handshake.
Questions we get on this code
Buyers ask whether the C member can be replaced by the M member when the schedule on the C part tightens. Electrically yes, since both are the same body and pin map and the M member is faster. The caution is on the emissions and on the edge rate: the faster member puts more energy into the cable, and a board that passed an emissions scan with the C member may need a recheck with the M member.
The second question is about the enable pins. They are not a power down. The barrier keeps switching and drawing current while the outputs are in high impedance, so the enable path saves bus contention, not supply current. If the goal is to cut standby power, the isolator has to be disabled on both sides or the supply has to be switched.