Contact Us

ISO6721RBDR

Brand: Texas Instruments
Texas Instruments ISO6721RBDR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ISO6721RBDR — Power Management & Signal Chain | Superb Automation

ISO6721RBDR

Texas Instruments — Power Management & Signal Chain

Product Overview

The ISO6721RBDR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

ISO6721RBDR: The Dual Isolator With the Channels and Supplies Reversed in the Body

ISO6721RBDR is a basic dual-channel digital isolator with a reversed pin arrangement in a SOIC (D-8) body of 8 pins. It is the ISO6721 with the pin order turned around, so the input of channel A and the output of channel B sit on side 1, which lets a barrier be crossed without a via under the package.

Order code and package

Ordering stringISO6721RBDR
PackageSOIC, 8 pins, D body, 4.90 mm by 3.91 mm nominal
Carrier3000 pieces on a large reel, level 2 260 C, one year floor life
Part marking21RB
Temperature rangeMinus 40 to plus 125 degrees Celsius
Sibling rowsISO6721RBDR.A at the same 3000 pieces, ISO6721RFBDR for the low default
Pin order, side 1VCC1, INA, OUTB, GND1 from pin 1 to pin 4
Pin order, side 2GND2, INB, OUTA, VCC2 from pin 5 to pin 8
Default outputHigh, the FB suffix gives low

Electrical parameters that decide the application

Signaling rate50 Mbps
Isolation rating3000 VRMS per UL 1577 in the D body
Working voltage450 VRMS, 637 VPK repetitive peak
Transient and surge4242 VPK transient, 5000 VPK impulse, 6500 VPK surge
Common mode transient immunity150 kV per microsecond typical
Supply range1.71 to 1.89 V, or 2.25 to 5.5 V, per side
Level translation1.71 V to 5.5 V
Supply current per channel1.8 mA typical at 1 Mbps
Propagation delay11 ns typical, 18 ns maximum at 5 V
Pulse width distortion0.2 ns typical at 5 V
External clearanceAbove 4 mm
ESD across the barrierPlus or minus 8 kV IEC 61000-4-2 contact discharge
Channel splitOne channel each way
Enable pinNone in the eight pin body

Family variants and how they differ

ISO6721BDRSame channel split with the standard pin order
ISO6721FBDRStandard pin order with the low default
ISO6721RFBDRReversed pin order with the low default
ISO6720BDRBoth channels forward in the standard order
ISO7321FCDR25 Mbps dual with an input noise filter when 50 Mbps is not needed
ISO7721Wide body dual at 100 Mbps for a reinforced barrier

Points to check before this part goes on a BOM

The R letter is a pin arrangement change and nothing else. Rate, barrier, current and default are the same as the plain part, so a substitution between the two is a routing question rather than an electrical one.

A reversed body is normally chosen when the two sides of the barrier face opposite edges of the board. It removes the need to cross two traces under the package, which is where creepage is lost.

The eight pin body has no enable, so the channels run as soon as both rails are up. A line that must stay quiet during power up needs the low default version.

3000 VRMS in the narrow body is a basic rating. The reinforced option in this family is the automotive grade part, not a suffix of the industrial string.

The reversed body keeps the same 4.90 mm by 3.91 mm outline, so the pads do not move. Only the function of each pad changes, which is exactly why a footprint library entry has to name the pin order.

The barrier figure does not change with the pin order, and neither does the clearance. The 3000 VRMS rating belongs to the package, not to the arrangement of the pins inside it.

The reel holds 3000 pieces, the same as the standard pin order, so a mixed inventory is possible if both strings are stocked. Separating them by marking rather than by description is the only reliable shelf discipline.

Both pin orders are 3000 pieces on a 330 mm reel, so the carrier is identical and cannot be used to tell them apart. Only the marking on the body and the label on the reel separate the two strings.

Pin order as a build decision

Two parts that are electrically identical but pin ordered differently are a common source of a wrong line item in a bill of materials, because the descriptions read the same. The marking on the body is the only visible difference at incoming inspection, which is why the 21RB mark is worth recording.

Two pin orders, one bill of materials line

A reversed body is normally introduced when the isolated region changes shape between two revisions of a board. Rather than reroute the two signal traces under the package, the reversed part is fitted and the copper stays as it was. The electrical behaviour is unchanged, which is why the two strings sit in the same family table.

The risk is a mixed reel. Two parts that read the same in a description and differ only in pin order will be picked from the same bin if the bin was filled by description, and the failure appears as a channel that works in one direction and not the other.

Marking, reel label and goods in

The marking on the body is the only difference visible without powering the board: 21RB against 21FB and 21RFB. Recording that mark against the reel label is a two minute check at goods in and it is the check that catches a wrong line item before it reaches the line.

The reel itself carries 3000 pieces with level 2 moisture classification, and the same floor life applies to both pin orders. A partial reel returned to the bag keeps that floor life, and the desiccant indicator is what tells the next operator whether it was respected.

Substitution risk in a repair

A repair that fits the standard pin order where the reversed body belonged produces a board that powers up and passes a quick functional test in one direction while a channel is dead in the other. The fault looks like a solder joint rather than a wrong part, which is what makes it expensive.

Recording the marking on the approved drawing is the fix. A photograph of the body on the assembly instruction costs nothing and removes the ambiguity for the next technician.

Reversed pin order as a second source problem

Two electrically identical parts with different pin orders are a classic second source trap. A substitution approved on the electrical table alone can leave one channel dead, and the fault only appears on the boards that were built after the change. Reading the marking at goods in and keeping the two strings apart on the shelf is cheaper than finding the fault after assembly, and the two minute check at goods in is the only step that catches it before the line runs. A photograph of the body on the assembly instruction removes the ambiguity for the next technician.

Where this order code fits

It fits where the two isolated sides face opposite board edges and a straight run between the pads matters more than a standard footprint. Teams comparing it with a neighbouring part start from our How to Verify a Drop in Replacement page, and teams replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.

Questions buyers ask

Is it electrically interchangeable with ISO6721BDR? Yes, the difference is the pin order. The footprint is the same size, so the substitution changes the routing and nothing else.

What is the marking on the body? 21RB on this string and 21RFB on the low default version, which is how the two are told apart once the reel label is gone.

Does the reversed pin order change the isolation rating? No. The barrier is the same 3000 VRMS in the same body, and the clearance is above 4 mm on both arrangements.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Date Code Management page sets out the checks that keep a substitute from failing on the bench.