Contact Us

CC2652P1FRGZR

Brand: Texas Instruments
Texas Instruments CC2652P1FRGZR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

CC2652P1FRGZR — Power Management & Signal Chain | Superb Automation

CC2652P1FRGZR

Texas Instruments — Power Management & Signal Chain

Product Overview

The CC2652P1FRGZR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

CC2652P1FRGZR SimpleLink multiprotocol 2.4 GHz wireless microcontroller with an integrated power amplifier

The CC2652P1FRGZR is the high power member of the SimpleLink multiprotocol family, with a 48 MHz Cortex M4F core, 352 KB of flash, 256 KB of ROM, 80 KB of SRAM and an integrated power amplifier that reaches plus 20 dBm. The radio covers Bluetooth 5.2 low energy and IEEE 802.15.4, so one part serves a phone connected product and a mesh or a thread network at the same time, which is the reason this family dominates the connected sensor market.

The plus 20 dBm output is the specification that separates this member from the rest of the family. A 20 dBm transmitter reaches roughly four times the distance of a 10 dBm one in free space, which is the difference between a sensor in a basement plant room and a sensor that needs a repeater. The cost is current: 85 mA at 20 dBm against 22 mA at 10 dBm and 9.6 mA at 5 dBm, so the power budget and the duty cycle have to be planned together rather than chosen separately.

Key parameters taken from the CC2652P1FRGZR document

Core48 MHz Arm Cortex M4F with a CoreMark score of 148, plus a separate ultra low power sensor controller with 4 KB of SRAM
Memory352 KB of in system programmable flash, 256 KB of ROM for protocol and library functions, 80 KB of SRAM with parity, and 8 KB of cache SRAM usable as general purpose memory
Radio2.4 GHz transceiver for Bluetooth 5.2 low energy and IEEE 802.15.4 physical and media access layers
Output powerUp to plus 20 dBm from the integrated amplifier, with 10 dBm and 5 dBm as the lower settings
SensitivityMinus 100 dBm for 802.15.4 and minus 105 dBm for Bluetooth low energy at 125 kbps coded
Current6.9 mA in receive, 7.3 mA transmitting at 0 dBm, 9.6 mA at 5 dBm, 22 mA at 10 dBm and 85 mA at 20 dBm
Low power modes0.94 microamp in standby with the real time clock and full memory retention, 150 nA in shutdown
CoexistenceThree wire, two wire and one wire packet traffic arbitration for sharing the band with another radio
PeripheralsSensor controller for sampling while the core sleeps, with 26 general purpose pins in the 48 pin body
Supply and temperatureOperates over the industrial range and is specified from minus 40 to plus 85 C
BodyVQFN RGZ 48 pins, 7 mm by 7 mm
Order code factsCC2652P1FRGZR, 3000 pieces on a large reel, marking CC2652, with the P1F marking on the high power die
Certification supportReference boards for regulatory approval in the 2.4 GHz band, with the matching network on the module

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

The 85 mA transmit current is the number that decides the battery, not the average current in the datasheet headline. A sensor that transmits for 2 ms every 10 seconds at 20 dBm draws an average of about 17 microamps from the radio alone, which is comparable to the standby current of a poorly chosen regulator. The same sensor at 5 dBm draws 2 microamps of average radio current and covers a shorter distance. The right choice is the lowest output power that closes the link, and that is measured on the site, not taken from a table.

The 80 KB of SRAM with parity is what allows an over the air update to be staged without an external memory. A firmware image of 200 KB cannot be held in RAM, so the update is written to flash in pages while the old image continues to run, and the parity protection on the SRAM is what keeps a bit flip in a control structure from turning into a field failure. In a product that is updated in the field, that combination is worth more than a faster core.

The sensor controller is the block that makes a coin cell product possible. It runs at 2 MHz with 30 microamps in a low power loop, samples an analogue input, compares it against a threshold and wakes the main core only when something changed. A product that measures temperature once a minute and reports every ten minutes spends almost all of its life in that block, and the main core is awake for milliseconds. Without it, the same duty cycle needs the M4F to wake for every sample and the battery life falls by an order of magnitude.

Coexistence arbitration is the detail that matters in a product with Wi-Fi on the same board. The part supports three wire, two wire and one wire signalling to a Wi-Fi chip, so the two radios take turns on the band rather than deafening each other. A product that puts a 2.4 GHz mesh radio next to a Wi-Fi module without that arbitration loses packets at exactly the moment the Wi-Fi is busiest, and the failure looks like a protocol bug rather than a radio problem.

  • Transmit power against the measured link at the real site, with the antenna in the real enclosure.
  • Average current over a full reporting cycle, including the regulator and the sensor.
  • Sensitivity with the antenna detuned by the product enclosure, not with the reference board.
  • Over the air update path on a production image, with a power loss in the middle of the write.
  • Coexistence signalling with the Wi-Fi radio, if the product carries both.
  • Sensor controller wake behaviour, measured on a battery rather than on a bench supply.

Which projects this part fits

This part fits connected sensors and actuators in building automation, smart metering, asset tracking, medical wearables that need a longer link, industrial monitoring with a mesh, and any product that has to reach plus 20 dBm without an external amplifier. It is also the part to quote when a product has to serve a phone over Bluetooth low energy and a mesh network at the same time, because the multiprotocol stack runs on one radio and one antenna. For customers in metering and building control, the combination of the sensor controller and the high power amplifier is what removes the repeater from the bill of materials.

Questions that come up before a purchase order is released

Does the plus 20 dBm output need an external amplifier?

No, the amplifier is inside the package, which is the point of this member. It does need a matching network built for the higher power, and it needs the supply to deliver 85 mA peaks without drooping, so the decoupling and the regulator are part of the radio rather than part of the power supply. A regulator that sags at 85 mA will show up as spectral splatter and as failed certification.

What is the real range at 20 dBm?

It depends on the antenna and the environment more than on the part. In free space, 20 dBm with a 2 dBi antenna on both ends gives a few hundred metres at the coded low rate. Indoors, through two walls, the same link gives tens of metres. The honest planning figure comes from a site survey with the actual enclosure, and the radio setting is then chosen to close that link with margin.

Can the part run Bluetooth low energy and 802.15.4 at the same time?

It runs one radio, so the protocols time share it rather than run simultaneously. The stack handles the scheduling, and the practical result is a device that can be provisioned over Bluetooth low energy and then join a mesh, or a gateway that listens on both. A product that needs true simultaneous operation needs two radios.

How much flash is left for the application?

352 KB total, of which the protocol stack in ROM takes most of the common code, so a typical application has a few hundred kilobytes for its own logic and for the over the air image. A large graphics display or a heavy cryptographic application eats that quickly. The ROM based stack is the reason this part has more usable flash than its total suggests.

What does the P1F marking mean?

It identifies the high power die inside the RGZ body, which matters because the family shares a package and a pinout across output power classes. A reel of the lower power member looks the same from the outside. We check the marking on incoming reels for exactly that reason, and the order code carries the distinction as well.

How SUPERB handles this line

We supply the CC2652P1FRGZR from original reels with lot traceability and check the die marking, because the family shares a body across output power classes. The RF component sourcing page lists the 2.4 GHz families we carry, MCU cross reference puts the cores and the memory sizes side by side, and drone and UAV components covers the radio and sensor parts that go into unmanned platforms, where a 20 dBm link is often the difference between a working telemetry channel and a lost aircraft.