Contact Us

ADS5463-EP

Brand: Texas Instruments
Texas Instruments ADS5463-EP is a power management component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADS5463-EP — Power Management & Signal Chain | Superb Automation

ADS5463-EP

Texas Instruments — Power Management & Signal Chain

Product Overview

The ADS5463-EP from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

ADS5463-EP: 12 bit 500 MSPS converter in the enhanced product grade for defence and aerospace

ADS5463-EP is the enhanced product version of a 500 MSPS 12 bit converter, with a controlled baseline, a military temperature range and a documented change notification flow in a HTQFP body of 80 pins. The ADS5463-EP is the enhanced product release of a 12 bit 500 MSPS converter. It states 10.5 effective bits, a 2 GHz input bandwidth, 75 dBc of SFDR and 64.6 dBFS of SNR at a 450 MHz input at the full 500 MSPS, a 2.2 V peak to peak differential input and a total power of 2.2 W. The package is an 80 pin HTQFP with an exposed pad, the outputs are LVDS compatible in offset binary format, and the grade is available to the military temperature range of minus 55 to 125 C.

Order code and package

Order codeADS5463-EP
Gradeenhanced product, controlled baseline
Resolution12 bit, 10.5 effective bits
Sample rate500 MSPS
Input bandwidth2 GHz
Full scale input2.2 V peak to peak differential
Output formatoffset binary, LVDS compatible
Output clockhalf rate, data on both edges
Package80 pin HTQFP with exposed pad
Total power2.2 W
Temperaturemilitary, minus 55 to 125 C
DocumentSGLS382C, November 2006, revised October 2009

Electrical parameters that decide the application

SFDR75 dBc at a 450 MHz input and 500 MSPS
SNR64.6 dBFS at a 450 MHz input and 500 MSPS
Input bandwidth2 GHz
Silicon life goal10 years at 105 C junction, per the document
Baseline controlone assembly site, one fabrication site
Traceabilityproduct traceability stated as a feature
Change controlextended product change notification
Power per sample4.4 nJ at 500 MSPS
Latencypipeline delay, check the timing table for the exact figure
Thermal paththe exposed pad under the 80 pin body
Supply5 V and 3.3 V rails per the document
Orderingthe EP suffix and the temperature grade both appear on the order

Points to check before this part goes on a BOM

The enhanced product grade is the reason to buy this code, not the converter performance. The document states a controlled baseline with one assembly site and one fabrication site, product traceability and extended product change notification, which is what a defence programme needs to show when a part is qualified and then held for ten years.

75 dBc of SFDR and 64.6 dBFS of SNR are quoted at a 450 MHz input at the full 500 MSPS, which is close to the top of the band. That is a harder test than the 10 MHz figures quoted on most converters, and it is the number that matters for a receiver that digitises a high intermediate frequency directly.

The 2.2 V peak to peak differential input is a specific drive requirement, and it is not the same as the 2 V range of the smaller families. A drive stage carried over from a 2 V board delivers 1.8 dB less signal, which costs about 1.8 dB of SNR before any other error, and the mistake is easy to make because both look like a differential input.

The military temperature range of minus 55 to 125 C is 70 C wider at the cold end than the industrial part. The document also states a silicon operating life goal of 10 years at 105 C junction, which is a thermal constraint for the enclosure: at 2.2 W per channel the junction rise has to be held so the goal remains true.

Output data transitions on both edges of a half rate output clock, in offset binary, which means the capture side runs at 250 MHz DDR for a 500 MSPS converter. A capture device that takes parallel LVDS in offset binary is required; a device that expects two's complement needs the conversion in fabric.

An 80 pin HTQFP with an exposed pad is a different assembly process from a QFN. The pad has to be soldered with a via array and the leads are fine pitch on four sides, so a rework process for this package is worth writing down before a production run rather than after the first failure.

For procurement this order code is normally bought against a programme schedule rather than a spot need, and the traceability requirement means the date code and the lot history have to travel with the parts. That is the one field that cannot be substituted when a broker offers the same part number at a lower price.

The output is offset binary with data changing on both edges of a half rate clock, so the capture side runs at 250 MHz DDR for a 500 MSPS converter. A receiver that expects two's complement needs the inversion done in fabric, and a receiver that expects a single edge clock needs a different capture scheme, both of which belong in the interface review before first article.

Where this order code fits

This order code belongs on defence and aerospace digitisation boards, radar and electronic warfare receivers, satellite payloads and high reliability test equipment where a 500 MSPS capture at 12 bit is needed and the buying process requires a controlled baseline. It is also used in medical and industrial programmes that must be able to show a change notification trail over a ten year life. Boards comparing it with a neighbouring part start from our Defense Grade Components page, and boards replacing a part that has gone end of life start from the ADC DAC Cross Reference page.

Questions buyers ask

What does the enhanced product suffix add? A controlled baseline with one assembly site and one fabrication site, product traceability and extended product change notification, plus the military temperature range.

Can the industrial version be used in place of this part? Only if the programme accepts minus 40 to 85 C and no baseline control. The die may be the same but the qualification and the documentation are not.

What capture interface does it need? LVDS in offset binary with data on both edges of a half rate clock, so a 500 MSPS converter presents a 250 MHz DDR bus.

SUPERB sources this order code for programmes that need the traceability trail kept intact, and the Obsolete RF Part Replacement page sets out the documents to ask for with the offer.