VND5T100AJTR-E
Product Specifications
VND5T100AJTR-E — Integrated Motor Driver / Smart Power Switch by STMicroelectronics
The VND5T100AJTR-E is an STMicroelectronics integrated motor driver / smart power switch in PowerSSO-12 for automotive and industrial actuator control applications.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| VND5T100AJTR-E | Full Part Number | STMicroelectronics Motor Driver / Power Switch |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | VND5T100AJTR-E |
| Package | PowerSSO-12 |
| Type | Integrated Motor Driver / Smart Power Switch |
| Qualification | Automotive AEC-Q100 / Industrial |
Product Overview
The VND5T100AJTR-E is an STMicroelectronics integrated motor driver / smart power switch in PowerSSO-12 package. Featuring ST's VIPower technology with monolithic integration of power MOSFETs, gate drivers, and protection/diagnostic circuitry, it simplifies motor control and high-side/low-side switching designs with reduced BOM count and enhanced reliability.
Key Features & Benefits
VIPower Monolithic Integration — Power + Control in One Package
ST's VIPower technology integrates N-channel power MOSFETs, gate drivers, charge pump, and comprehensive protection circuitry on a single die — eliminating external MOSFETs, bootstrap diodes, and sense resistors.
Comprehensive Protection & Diagnostics
Built-in overcurrent, overtemperature (thermal shutdown), undervoltage lockout, and load-dump protection with diagnostic feedback (current sense output, fault status flag) enables self-protecting designs suitable for safety-critical and autonomous systems.
Automotive-Grade Robustness
Designed to withstand harsh automotive and industrial environments including load dump, reverse battery, and extended temperature range for reliable operation in drone payload systems, robotics, and vehicle applications.
Target Applications
Drone Payload & Actuator Control
Drives brushed DC motors, solenoids, and resistive/inductive loads in drone gimbal systems, payload release mechanisms, landing gear actuators, and auxiliary power switching.
Automotive Body & Powertrain
Targets automotive applications including throttle control, EGR valves, HVAC actuators, mirror folding, headlamp leveling, and relay/lamp drivers — all requiring AEC-Q100 qualification.
Industrial Automation & Robotics
Powers motor control, valve actuation, and power distribution in industrial robots, conveyor systems, automated guided vehicles (AGVs), and factory automation equipment.
Frequently Asked Questions
What protection features does the VND5T100AJTR-E include?
The VND5T100AJTR-E features overcurrent protection, overtemperature shutdown, undervoltage lockout, and diagnostic feedback — ensuring robust, self-protecting operation in demanding environments.
Is external current sensing required?
No. The integrated current-sense output provides proportional load current feedback, eliminating the need for external shunt resistors and differential amplifiers.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics VND5T100AJTR-E with full traceability and batch-level QA documentation. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
VND5T100AJTR-E: two 100 milliohm channels for a 24 V rail
VND5T100AJTR-E is a dual channel automotive high side driver in the PowerSSO-12 body, on tape and reel, rated for 24 V systems. Each channel holds 100 milliohm typical on resistance, the pair shares a 58 V transient ceiling and an 8 V to 36 V operating window, and the current limit is 22 A typical. The off state supply current is 2 microamp typical with all loads connected, which is what makes the part usable in a module that sits on a battery for weeks.
Two channels in one package suit a load pair that always works together: a left and right lamp, a pair of valves, or a main and a redundant heater. The two channels share the supply pin and the thermal path but keep independent protection and independent current sense.
Figures come from DS7125 Rev 5 read this round, which prints 58 V maximum transient supply, 8 V to 36 V operating, 100 milliohm per channel, 22 A current limit, 2 microamp off state current and a 6 degrees per watt junction to case thermal resistance.
The electrical window
| Function | Dual channel high side driver with analog current sense, 24 V system |
| Maximum transient supply | 58 V |
| Operating range | 8 V to 36 V |
| On resistance | 100 milliohm typical per channel |
| Current limit | 22 A typical |
| Off state supply current | 2 microamp typical with all loads connected |
| Thermal resistance | 6 degrees per watt junction to case |
| Logic levels | 3.0 V CMOS compatible |
| Diagnostics | Proportional load current sense with high precision over a wide current range |
| Fault handling | Overload and short to ground latch off, thermal shutdown latch off, fault reset standby pin |
| Supply faults covered | Loss of ground, loss of supply, undervoltage shutdown, overvoltage clamp |
| Package | PowerSSO-12 |
| Qualification | AEC-Q100 |
Loss and the 6 degrees per watt path
At 100 milliohm per channel, 5 A costs 2.5 W and 10 A costs 10 W. The junction to case figure of 6 degrees per watt means the die to package path is not the limit; the limit is the board and the air. Two channels at 5 A each put 5 W into a PowerSSO-12, which needs a copper area and an ambient that a closed module rarely offers at the top of its range.
Because the two channels share one package, the loss that matters is the sum, not the larger channel. A pair of 5 A loads is a 5 W package; a pair of 2 A loads is 0.8 W. That distinction decides the copper and the enclosure, and it belongs in the thermal check before the BOM is frozen.
The sense path on a 24 V load
The proportional current sense is specified with high precision over a wide current range, which matters on a 24 V load that runs from 200 mA to 15 A. A mirror that is accurate only near full scale cannot be used for open load detection, and this part is specified for both ends. The sense resistor is chosen so the highest load current does not clip the converter input and the lowest still rises above the offset.
The FR_Stby pin resets a latched fault and holds the device in standby. A controller that never drives that pin can leave a module latched off after a transient fault, and the symptom looks like a dead output rather than a protective shutdown.
Where the pair is used
Truck and bus lighting, 24 V heaters, valves and small motors, and industrial vehicles with a 24 V rail and a load dump clamp. The 8 V floor covers a cold start on a 24 V system where the battery sags during cranking.
We supply the string for vehicle builds and hold the reel and date code record. Our power management cross reference page lists the 24 V family by resistance and channel count, the PPAP submission checklist page covers the automotive paperwork, and the component traceability report page describes the lot record we keep against the finished board.
Three questions buyers ask about this string
Is 58 V a steady state rating? No. It is the maximum transient supply. The operating range is 8 V to 36 V.
Are the two channels isolated from each other? They share the supply and the thermal path, and each has its own protection and sense. A failure in one does not shut the other down unless the shared thermal path trips both.
Can it be used on a 12 V rail? Electrically yes, but the 8 V floor and the sense scaling are set for 24 V loads, and the 12 V family has lower resistance parts for the same current.