Contact Us

STM8S105S6T6

Brand: ST
ST STM8S105S6T6 is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM8S105S6T6 — MCU & Embedded Processors | Superb Automation

STM8S105S6T6

ST — MCU & Embedded Processors

Product Overview

The STM8S105S6T6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM8S105S6T6: 32 Kbyte 5 V STM8S access line MCU in LQFP44

STM8S105S6T6 is the 32 Kbyte member of the STM8S105 access line in a LQFP44 body (10 by 10 mm), with 1 Kbyte of true data EEPROM, 2 Kbytes of RAM, 34 general purpose I/O, 31 external interrupt inputs, 8 capture compare channels, 15 high sink outputs and 9 analog inputs. The supply range is 2.95 to 5.5 V, the core runs at up to 16 MHz with zero wait state Flash access, and the converter is 10 bit with its own reference pins.

Order code and memory

Order codeSTM8S105S6T6
Program Flash32 Kbytes
Data EEPROM1 Kbyte, 300 kcycle endurance
RAM2 Kbytes
PackageLQFP44, 10 by 10 mm
Pin count44
Maximum general purpose I/O34
External interrupt pins31
Timer capture compare channels8
ADC channels9 of the 10 channel converter
High sink outputs15
Temperature gradesuffix 6, minus 40 to plus 85 C

Electrical and peripheral parameters

Supply voltage2.95 to 5.5 V
Maximum CPU clock16 MHz with zero wait state Flash access
Run current7.7 mA typical at 16 MHz from Flash on 5 V, 3.2 mA with the loop in RAM
Halt current6.5 uA typical at 5 V, 25 uA maximum at 85 C and 80 uA at 125 C
Active haltwait, active halt and halt modes, with the auto wakeup unit
Low power modesperipheral clocks can be switched off one by one
Wake up time7 microseconds from halt
Analog to digital converter10 bit, 9 channels, VREF+ and VREF- pins, 14 clock cycles per conversion
Digital to analog converternot present
Comparatorsnot present on this line
Timersone 16 bit advanced control timer with four capture compare channels and three complementary outputs, two 16 bit general purpose timers with five channels between them, one 8 bit basic timer, auto wakeup timer, window and independent watchdog
Serial interfacesUART with LIN master, SmartCard and IrDA, SPI up to 8 Mbit/s, I2C up to 400 kHz
DMAnot present on this line
Data EEPROM endurance300 kcycle for the 1 Kbyte true data EEPROM
Program memory endurance10 kcycle, 20 years retention at 55 C
Identification96 bit unique ID, single wire interface module, option byte read out protection

Points to check before this part goes on a BOM

The S6 is the 32 Kbyte version of the 44 pin access line part, and it is the most common member of the line in industrial panels because it pairs a 5 V supply with enough program space for a small protocol stack. The 44 pin body keeps the advanced control timer with three complementary outputs, the two general purpose 16 bit timers with five capture compare channels between them, the 8 bit basic timer and the auto wakeup unit, so a motor control loop and a host link can share the part without a second chip.

Thirty two Kbytes is the ceiling of this line and it is a real ceiling: there is no 64 Kbyte STM8S105, so a product that outgrows it moves to the STM8S207 line or to a 32 bit part. On the RAM side the 2 Kbytes are shared with the stack and the buffers, and while that is generous by 8 bit standards it is not enough for a graphical display or a TCP stack. The usual split on this part is one 128 byte serial buffer, one 64 byte frame buffer and a 512 byte logging area in EEPROM.

Current is 7.7 mA typical at 16 MHz from Flash on 5 V and 3.2 mA with the inner loop in RAM, and halt is 6.5 uA typical at 5 V, 25 uA maximum at 85 C and 80 uA at 125 C. The gap between typical and maximum at temperature is the number that decides whether a sealed enclosure needs a heatsink path, since 80 uA at 125 C inside a metal box is a different thermal budget from the 6.5 uA on the bench.

Where this order code fits

Motor and pump controllers, industrial gateways with a fieldbus link, heating plant controllers and production equipment where a 5 V rail and 32 Kbytes of code are both required. Teams comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and teams replacing a line that has gone end of life start from the One Stop BOM Sourcing page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

Is there a 64 Kbyte STM8S105? No. The access line stops at 32 Kbytes with the S6 and C6 order codes. Larger program arrays start with the STM8S207 performance line.

What is the halt current at temperature? 6.5 uA typical at 5 V, 25 uA maximum at 85 C and 80 uA maximum at 125 C, all with the Flash in power down mode.

Which timers does it carry? One 16 bit advanced control timer with four capture compare channels and three complementary outputs, two 16 bit general purpose timers with five channels between them, one 8 bit basic timer, the auto wakeup timer, a window watchdog and an independent watchdog.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Strategic Sourcing page sets out the checks that keep a substitute from failing on the bench.