Contact Us

STM32F205VBT6

Brand: ST
ST STM32F205VBT6 is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM32F205VBT6 — MCU & Embedded Processors | Superb Automation

STM32F205VBT6

ST — MCU & Embedded Processors

Product Overview

The STM32F205VBT6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM32F205VBT6: 128 Kbytes at 120 MHz with 82 I/Os

STM32F205VBT6 is the smallest flash density of the STM32F205 line in the 100 pin LQFP body: 128 Kbytes of flash, 64 Kbytes of system SRAM made up of 48 plus 16 Kbytes, 4 Kbytes of backup SRAM, 82 I/O pins and 24 analog channels. The core and clock are the same as the rest of the line at 120 MHz with the accelerator, so this part is chosen when the application is compute bound rather than memory bound, and it is the density that surprises teams who compare it with an F103 of the same flash size and find the SRAM smaller.

48 plus 16 is not 64 in one block

The system SRAM is split into two regions, 48 Kbytes and 16 Kbytes, and the smaller one is the only memory the USB OTG high speed engine can reach directly. A DMA buffer for the high speed port therefore has to be placed in the 16 Kbyte block, and any application that allocates its buffers without regard to the split will find the transfer failing at run time rather than at link time. This is the kind of detail that matters more than the headline number, and it is documented in the memory map rather than in the marketing summary.

Values at a glance

ParameterValueNote
Core and clockCortex-M3, 120 MHz, 150 DMIPSAdaptive real time accelerator, MPU
Flash, SRAM128 Kbytes, 48 plus 16 Kbytes plus 4 backupDMA capable SRAM on the high speed port is the 16 Kbyte block
PackageLQFP100, 14 by 14 mmLQFP64 and LQFP144 bodies carry other densities
I/O82 pinsUp to 136 fast I/Os across the family, 82 in this body
ADC, DAC3 converters, 12 bit, 24 channels; 2 DAC channels2 MSPS each, 6 MSPS in triple interleaved mode
External memoryFSMC with LCD parallel interfaceCompact Flash, SRAM, PSRAM, NOR and NAND support
Communication3 I2C, 3 SPI, 2 I2S, 4 USART, 2 UART, 2 CAN, SDIOFifteen interfaces counted by the vendor
TemperatureMinus 40 to plus 85 CCode 7 gives 105 C ambient

Where 128 Kbytes goes at 120 MHz

A faster core makes larger libraries affordable in time but not in flash: a signal processing chain with floating point filters, a small RTOS and a USB stack plus a bootloader is realistically 90 to 110 Kbytes, leaving very little margin. The usual pattern is to keep the compute heavy library and move the configuration interface or the logging to a host, or to accept the 256 Kbyte density which is the next code in the same body. Deciding this at the architecture stage is cheaper than discovering it when the linker reports the region full.

Density choice inside the F205 line

The VB, VC, VD, VE and VG codes step through 128 Kbytes to 1 Mbyte in the same 100 pin body, and the SRAM grows with the density from 64 to 128 Kbytes. That makes the family easy to rescale without a board change, which is the strongest argument for using it in a product platform rather than in a single product. A microcontroller cross reference that lists the densities as one family, a BOM consolidation step that keeps the platform on one line, and an OEM procurement arrangement for the volume commitment cover the platform view.

Common questions

Why is the SRAM split into two blocks? The architecture places 48 Kbytes in one region and 16 Kbytes in another, and only the smaller block is accessible to the high speed USB DMA. Linker placement has to respect that.

Is the part 5 V tolerant? Many digital pins are, but the analog inputs are not, and the 1.8 V minimum supply means a board mixing 5 V logic with this part needs level shifting regardless.

Does it support Ethernet? No, that is the STM32F207 subfamily. The FSMC and the LCD interface are present here, so an external network controller on the memory bus is the route if Ethernet is required.