Contact Us

VBP16R26S

Brand: VBsemi
VBsemi VBP16R26S is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

VBP16R26S — Discrete & Power Semiconductors | Superb Automation

VBP16R26S

VBsemi — Discrete & Power Semiconductors

Product Overview

The VBP16R26S from VBsemi is a discrete power semiconductor delivering efficient switching and power conversion. VBsemi specializes in discrete MOSFETs, power transistors, and protection devices at competitive cost for power supplies, motor control, and consumer electronics.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

VBP16R26S: 600 V and 26 A in a TO247 with 115 milliohm

The VBP16R26S is a single N channel MOSFET in a TO247 body, rated at 600 V drain to source, plus or minus 30 V on the gate, a 3.5 V threshold, 26 A of drain current and 115 milliohm at a 10 V gate. The vendor table lists a superjunction multiple epitaxy die. It sits between the 20 A and the 32 A members of the 600 V family.

One hundred and fifteen milliohm at 600 V is a middle die. At 26 A the die makes 78 W, at 20 A 46 W, at 13 A 19 W and at 6 A 4 W. On a fan cooled heatsink the working current is 13 to 16 A, and on a plate heatsink 7 to 9 A.

The part is bought for two situations: a 600 V qualified platform that needs a bit more current than the 20 A member, and a cost-down of a 650 V platform where the surge margin can be shown to hold. In the second case the qualification work is larger than the price saving, and that is a decision for the product owner rather than the buyer.

Key data for the VBP16R26S

ConfigurationSingle N channel
PackageTO247, through hole, tab on the drain
VDS600 V
VGSPlus or minus 30 V
Vth3.5 V typical
ID26 A
RDS(on) at 10 V115 milliohm
StructureSuperjunction, multiple epitaxy
Loss at 6 A4.1 W
Loss at 13 A19.4 W
Loss at 20 A46.0 W
Loss at 26 A77.7 W

Thermal chain from die to air

The TO247 path is die to case at about 0.5 to 0.7 K per watt for a die of this area, case to heatsink through a 0.3 mm pad at 0.4 K per watt, and heatsink to air at 1 to 3 K per watt for a plate in still air. The pad and the heatsink dominate, which is why the same die in a TO220 runs hotter at the same current.

At 15 A and 115 milliohm the loss is 26 W cold and 47 W hot. With a total path of 2 K per watt and a 40 C ambient, the junction is at 134 C, which is inside the limit but close. At 12 A the loss is 17 W cold and 31 W hot and the junction is at 102 C, which is a working point.

Screwing torque matters more than people expect. An under torqued TO247 with a pad has a contact resistance two to three times the specified value, and the junction is 20 C hotter at the same current without any visible sign.

A 600 V part on a 48 V output converter

A 600 V primary switch on a 400 V bus feeding a 48 V output is a common arrangement in telecom and in server power. The primary carries 2.5 A at 1 kW, the reflected voltage from the secondary is 400 V plus the diode drop, and the leakage spike adds 100 V. That lands at 550 V peak, which is inside 600 V by 50 V and inside 650 V by 100 V.

The choice between the classes is therefore a margin decision of 50 V, and the cost difference at these volumes is small. Where the platform is already 650 V, staying there is the cheaper engineering decision even if the part costs more.

Where the platform is 600 V because the transformer was qualified at that reflected voltage, changing to 650 V is free electrically and costly in paperwork, so the 600 V part stays in the bill of materials for the life of the product.

Where this part fits

Telecom rectifiers at 380 V DC, power factor stages at 500 W, auxiliary supplies, and the primary of a 500 W forward converter. It is also used in a two switch forward at 400 V, where two parts share the off state voltage and the clamp diodes recover the leakage.

In a bridge the body diode recovery is the parameter to check, and a standard recovery body diode at 26 A puts a spike on the opposite switch at 100 kHz. In a single ended stage the body diode never conducts and the standard grade is fine.

For a board with a sealed enclosure and no fan, the working current is 6 to 8 A and the heatsink is the enclosure wall. The kitting service page covers how the thermal pad and the screw are kitted with the part so the line does not substitute a thinner pad.

The gate resistor is the cheapest tuning element on a board like this. At 15 A and 400 V, a 10 ohm resistor gives a 40 ns transition and a 250 ns gate delay, which is slow enough to keep the drain spike under 500 V on a 20 nH loop. Dropping to 4.7 ohm halves that and doubles the dv/dt, and the radiated emissions move up by 6 dB. On a product that has already passed emissions with a 10 ohm part, the resistor is not a free variable in a cost down.

The sourcing side of this part is covered on the supplier scorecard. For a middle current code in a 600 V family, that page covers how delivery is scored over a year.

Questions we get on this code

What is the difference from the 32 A member? The 32 A part at 85 milliohm is the faster and lower resistance die. The 26 A part is a smaller area at higher resistance. They are not the same die graded, so a swap changes the loss.

Is there an isolated version? Not in this body. The TO247 tab is the drain, so a shared heatsink needs an insulating pad.

What happens at 5 V gate drive? The threshold is 3.5 V, so a 5 V drive leaves little overdrive and the resistance rises well above the printed 115 milliohm. Drive at 10 V.

How is the avalanche energy rated? The vendor page does not print it. A flyback with a leakage spike close to 600 V needs an external clamp rather than reliance on the die.