HXN50152
Product Specifications
HXN50152
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXN50152 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXN50152: 350 W across 960 to 1400 MHz, and 400 W inside a 60 MHz window
The HXN50152 is an internally matched gallium nitride HEMT rated at 350 W across 960 to 1400 MHz for pulsed amplifier use, on a 50 V rail, with 14 dB of gain and 65 per cent efficiency printed on the shelf row. The product page adds the most useful number on the record: inside a narrow window from 1030 to 1090 MHz the same part is described as a 400 W transistor.
That second figure is worth what it costs. 350 W is 55.44 dBm and 400 W is 56.02 dBm, so the narrow band rating is 0.58 dB above the wide band rating. Half a decibel is not a different device; it is the same device asked for less bandwidth, and it tells a buyer that the part has margin at the centre of the window that the wide band rating does not spend.
The wide rating is the one to quote when the band is not yet fixed. The narrow rating is the one to quote when the programme sits inside 1030 to 1090 MHz, which is the air traffic and secondary surveillance region of the L band, and where the pulse condition suits that traffic. Both figures carry the same rail and the same mode and neither is accompanied by a pulse width or a duty cycle.
The HXN50152 rows as the vendor publishes them
| Part class | Gallium nitride HEMT, internally matched, pulsed amplifier use |
| Frequency range, product page | 960 to 1400 MHz |
| Frequency range, index row | 0.96 to 1.4 GHz |
| Band width, calculated | 440 MHz |
| Band ratio, calculated | 1.46 to 1 |
| Narrow band window, product page | 1030 to 1090 MHz, 60 MHz wide |
| Output power, wide band | 350 W |
| Output power, narrow band | 400 W |
| Wide band output in dBm, calculated | 55.44 dBm |
| Narrow band output in dBm, calculated | 56.02 dBm |
| Difference between the two, calculated | 0.58 dB |
| Output per megahertz of the wide band, calculated | 0.80 W per MHz |
| Gain, index row | 14 dB |
| Drive needed for 350 W at 14 dB, calculated | 41.44 dBm, 13.9 W |
| Efficiency, index row | 65 per cent |
| DC input at 350 W and 65 per cent, calculated | 538 W, 10.8 A on a 50 V rail, 188 W of heat |
| Drain rail, index row | 50 V |
| Load voltage at 350 W into 50 ohm, calculated | 132.3 V RMS, 187.1 V peak |
| Load voltage at 400 W into 50 ohm, calculated | 141.4 V RMS, 200.0 V peak |
| Peak swing against the rail at 350 W, calculated | 3.74 times |
| Mode, index row | Pulse |
| Pulse width and duty | Not published on either document |
| Package and body | Not published |
| Thermal resistance, junction to case | Not published |
| Load impedance at the output | Not published, no load pull table |
| Orderable addendum and packing | None published |
What the narrow band figure tells a buyer
A part that gains 0.58 dB when the window narrows from 440 MHz to 60 MHz is a part whose match is lossy at the edges of the wide window. That is expected: an internally matched input on a wide window has to present a compromise impedance across the band, and the compromise costs a little gain at the edges and a little output. Inside the narrow window the compromise disappears and the part delivers what the die can do.
The practical reading is that a programme inside 1030 to 1090 MHz should specify the narrow window in the enquiry and on the purchase order, because the vendor distinguishes the two and the test condition follows the specification. A programme that orders against the wide band row and then runs at 1060 MHz will get a part that meets the wide band number and may not be screened at the narrow band output.
The second reading concerns the network. A 440 MHz window at L band needs a match that holds across a 1.46 to 1 ratio, and the same network tuned for 1030 to 1090 MHz can be made to deliver more output because it is not asked to work at both ends. That is where the extra 0.58 dB comes from in practice, and it is why the network should be tuned for the window the programme will actually use.
Four hundred watts at L band: the drive and the heat
At 14 dB of gain the 350 W rating needs 13.9 W of drive, which is a single stage on most builds and is the reason this part is easier to integrate than the 800 W and 1500 W rows above it. The narrow band 400 W rating needs 14.6 W at the same gain, so the driver does not change when the part is asked for the extra half decibel.
The heat is a different story. At 65 per cent efficiency and 350 W the die dissipates 188 W during the pulse, and at 400 W and the same efficiency it dissipates 215 W. Those figures assume the pulse condition, and the pulse condition is not published, so the average heat cannot be sized from the page. What can be said is that the die sees 188 W for the length of the pulse and the thermal path has to survive that transient.
The voltage is the third number. At 350 W into 50 ohm the load sees 187.1 V peak and at 400 W it sees 200.0 V peak, which is 3.74 and 4.00 times the 50 V rail. A 200 V RF swing is ordinary at this power and still demands that the output capacitor, the connector and any measurement tap be rated for it.
Where the HXN50152 sits against the 800 W and 500 W rows
On the same shelf the 500 W row covers 960 to 1400 MHz and the 800 W part covers 960 to 1200 MHz. This part holds the wide window at 350 W and adds a narrow band rating at 400 W, which no other row on the shelf does. That combination makes it the entry point for a programme that is not yet sure of its band and knows it will not need more than 400 W.
Step up to 500 W and the drive rises from 13.9 W to 10.0 W if the 17 dB gain figure is right, which is a lower drive for a higher output, so the choice between the two rows is not a simple ladder. Step up to 800 W and the drive rises to 40.1 W, which is a two stage driver and a different chassis. The three rows therefore sit at three different levels of system complexity even though their powers are within 4.6 dB of each other.
The comparison, including the drive figure for each, is on the RF power transistor cross reference page. Where the band is still open, the honest shortlist is this part and the 500 W row, and the deciding question is whether the extra 1.55 dB is worth a driver that may be harder to integrate.
Questions buyers ask about the HXN50152
Is it a 350 W part or a 400 W part? Both, under different windows. The wide 960 to 1400 MHz rating is 350 W and the narrow 1030 to 1090 MHz rating is 400 W. The difference is 0.58 dB and the specification should name the window, because the test condition follows it.
Is the input matched inside the package? Yes, the page describes the part as internally matched, which on this shelf refers to the input. The output network is on the customer board and no load impedance table is published, so the output match has to come from a measurement or a data sheet request.
What pulse condition applies? Neither document publishes a width, a duty or a peak figure. The mode is pulse and the powers are pulse figures with no stated condition, so the factory has to supply the condition before the thermal path is closed.
How is a part like this bought? Through a channel that can prove the batch, with an incoming check at the window the programme will use and a pulse test at the agreed condition. The RF component sourcing page sets out the trace, and where the module also needs its driver, its circulator and its passives against one date the one stop RF supply page covers the consolidated buy.