HXN50124
Product Specifications
HXN50124
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXN50124 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXN50124: 140 W on the index, 1400 W in the description, one decimal place apart
The HXN50124 is a DC to 3 GHz row on the Hisiwell 50 V shelf. The index gives it 140 W. The product description calls it a 1400 W single ended GaN HEMT. Those two numbers differ by a factor of ten and they sit on the same page, which makes this the single most important thing to settle about the part before a quotation leaves the building.
140 W is 51.46 dBm. 1400 W is 61.46 dBm. The difference is not a rounding question, it is 10 dB, and 10 dB is a hundredfold in the power supply, the heat sink and the cost. A buyer who reads the description and a buyer who reads the index are describing two different products, and only one of them can be right.
The reading that reconciles them is a shifted decimal in the description, and that is the reading this page takes, because 140 W is consistent with the rest of the shelf: the HXN50122 is 130 W, the HXN50121 is 100 W, and a 1400 W single ended part at DC to 3 GHz on a 50 V rail does not exist anywhere in the family. The page reports both figures and states the reconciliation as an inference, not as a fact.
The HXN50124 rows as published, with the conflict on the table
| Part class | Gallium nitride HEMT power transistor, single ended |
| Frequency range | DC to 3 GHz |
| Output, index row | 140 W |
| Output, product description | 1400 W |
| 140 W in dBm, calculated | 51.46 dBm |
| 1400 W in dBm, calculated | 61.46 dBm |
| Gap between the two, calculated | 10 dB, a factor of ten |
| Position against the shelf, calculated | 0.32 dB above the 130 W HXN50122, 1.46 dB above the 100 W HXN50121 |
| Drain rail, index row | 50 V |
| Mode, index row | Continuous wave |
| Thermal claim in the description | Thermally optimised for wideband continuous wave operation |
| Matching | No prematch stated |
| Gain | Not published on the index row |
| Drain efficiency | Not published on the index row |
| Package and body | Not published on the index row |
| Thermal resistance, junction to case | Not published |
| Gate bias point and quiescent current | Not published |
| Load impedance, source and load | Not published |
| Applied application list | Wireless communication infrastructure, wideband amplifier, EMC testing, industrial scientific and medical |
| Orderable addendum and packing data | None published |
The thermal claim in the description is worth keeping even though the wattage is wrong. Thermally optimised for wideband continuous wave is a statement about the die attach and the flange, and it is the sort of statement that comes from a part intended to run at a fixed bias for years rather than in a pulsed radar. On a 3 GHz continuous wave part that is the right kind of engineering and it is the kind of claim a customer can ask the factory to confirm in writing.
The shelf position settles the wattage question in practice. A 140 W row sits 0.32 dB above the 130 W part on the 2 GHz window, which is a normal bin step, and 1.46 dB above the 100 W part on the same 3 GHz window. A 1400 W row would sit 10 dB above everything on the shelf and would need a rail and a package that no other member uses. The inference is strong and it is still an inference, and the factory answer should be obtained in writing before a specification is issued.
What the two wattages cost on the rail
| Case | DC input, calculated | Drain current at 50 V, calculated | Heat, calculated |
| 140 W at 50 per cent | 280 W | 5.60 A | 140 W |
| 140 W at 60 per cent | 233 W | 4.67 A | 93 W |
| 140 W at 70 per cent | 200 W | 4.00 A | 60 W |
| 1400 W at 50 per cent | 2,800 W | 56.00 A | 1,400 W |
| 1400 W at 60 per cent | 2,333 W | 46.67 A | 933 W |
| 1400 W at 70 per cent | 2,000 W | 40.00 A | 600 W |
This table is the reason the decimal matters. At 140 W the part draws 4 to 5.6 A, which is a single supply and a normal choke. At 1400 W it draws 40 to 56 A on a 50 V rail, which is a busbar, a liquid loop and a different class of product entirely. No company orders a supply for the wrong one by accident twice, but the first time is expensive.
The heat row is the same story. A 140 W part leaving 60 to 140 W of heat is a flange on a spreader. A 1400 W part leaving 600 to 1400 W is a cold plate with a specified flow rate. The mechanical drawings, the mounting torque and the enclosure all follow from the wattage, so the wattage has to be right before any of them are drawn.
At the output, 140 W into 50 ohm is 83.7 V RMS and 118.3 V peak, 167.3 V peak under a two to one mismatch. At 1400 W it would be 264.6 V RMS and 374.2 V peak, which exceeds every standard connector in the 50 ohm world and would require a completely different output structure. That alone is enough to close the question for a practical buyer.
The 3 GHz window and where this row belongs
| HXN50121 | 100 W | Continuous wave and modulated per description | 1.46 dB below this row |
| HXN50124 | 140 W index, 1400 W description | Continuous wave, thermally optimised per description | Reference |
| HXN50131 | 150 W per side, push-pull | Continuous wave, HF to 3 GHz | Topology alternative, even harmonic cancellation |
| HXN50141 | 280 W | Continuous wave, thermally optimised | 3.01 dB above this row |
| HX04200F | 200 W index, 219 W parameter | Continuous wave, 48 V, flanged | 1.55 dB above, documented gain and efficiency |
| HX2040370P | 370 W on 2 to 4 GHz | Continuous wave, 48 V | 4.22 dB above, different band |
The row is a small step on a crowded shelf. Between the 100 W and the 280 W members there are three separate options at 140, 150 per side and 200 W, and the choice among them is about topology and documentation more than about power. A customer who wants the smallest step up from the 100 W part takes this one. A customer who wants to halve the number of stages takes the 280 W part and pays 3.01 dB of extra drive requirement for it.
The push-pull member is the one that gets overlooked. Its 150 W per side, combined to 300 W, comes with even harmonic cancellation that a single ended part does not have, and on a wideband amplifier that cancels the second harmonic at the output transformer rather than in a filter. That is a system benefit that does not appear in a wattage column at all.
The family comparison is on the RF power transistor cross reference, and the document route for settling a wattage conflict with the factory is on the RF component sourcing page.
Ordering, and the one question to ask first
The first question to the factory on this part is which wattage is orderable. It costs one email and it removes a 10 dB error from the quotation. Nothing else on the page matters as much, and no purchase order should be raised until the answer is in writing.
No orderable addendum, packing column, marking code or moisture level is published, and none is quoted here. The order should carry the part number, the band, the rail, the mode, the output point and the quantity, and the confirmed wattage should be written on the same document as the measurement condition so that the two cannot drift apart later.
Lead time is unpublished. On this shelf the variables are the package and the test, and the wattage question has to be answered before either can be priced. A date quoted before the wattage is settled is a date for an unspecified product.
Where a documented alternative at the same band is needed, the one stop RF supply page covers the qualification path for a substitute.
Questions buyers ask about the HXN50124
Is it 140 W or 1400 W? The index says 140 W and the description says 1400 W. The shelf position and the surrounding rows support 140 W, and the factory answer should be obtained before any specification uses either number.
What does thermally optimised mean here? The vendor uses the phrase for wideband continuous wave operation, which normally means the die attach and the flange were chosen for steady state rather than pulsed duty. The thermal resistance is not published.
Is there a prematch? None is stated for this part. Both ports are board work and no impedance table is published.
Can it be backed off for a modulated carrier? Nothing published says otherwise, and no average figure is given. The average level has to be set from the thermal limit.
For the shelf view with the rails and bands aligned, the reference is the cross reference.