Contact Us

HXC40022

Brand: Hisiwell
Hisiwell HXC40022 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40022 — Discrete & Power Semiconductors | Superb Automation

HXC40022

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40022 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40022: thirty one watts on 5.3 to 5.9 GHz, the top of the ladder

The HXC40022 is the largest member of the gallium arsenide internally matched family on the 5.3 to 5.9 GHz window. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 5.3 to 5.9 GHz, saturation output not printed, output at 1 dB compression at least 45 dBm, gain at least 10 dB, drain efficiency at least 35 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

45 dBm is 31.62 W. The part is the largest output available in this family on any window and it uses the same 10 V rail as the 4 W member, which is the family's main commercial argument: one rail, one family, four power levels, six windows. What changes with the power is not the voltage but the current, which reaches 9.04 A here.

The band is 600 MHz, 10.71 per cent fractional at 5.6 GHz, and the flatness is plus or minus 0.8 dB as on every other member. A transmitter built around this device can cover the whole 5.3 to 5.9 GHz window with a single module, which is what makes it attractive for a multi channel ground station.

The parameter rows Hisiwell publishes for HXC40022

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range5.3 to 5.9 GHz
Bandwidth, calculated600 MHz, 10.71 per cent fractional at a 5.6 GHz centre
Output at 1 dB compression as publishedat least 45 dBm
Output at 1 dB compression in watts, calculated31.62 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 10 dB
Drain efficiency as publishedat least 35 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated35 dBm, 3.16 W
DC input at compression, calculated90.35 W
Drain current at compression, calculated9.04 A at 10 V
Dissipation at compression, calculated58.73 W
Dissipation if efficiency reaches 50 per cent, calculated31.62 W
Output per 100 MHz of the band, calculated5.27 W
Load voltage at compression into 50 ohm, calculated39.76 V RMS, 56.23 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour on the same band at 41 dBmHXC40021, 38 per cent efficiency
Neighbour on the adjacent window at 45 dBmHXC40026, 5.8 to 6.7 GHz, 35 per cent

Ninety watts of DC on a ten volt rail

The DC input at compression is 90.35 W, which is more than most single phase converters deliver at 10 V. The usual arrangement is a two phase or three phase buck with a current share that keeps each phase below 4 A, followed by a bulk capacitor bank close to the drain feed. The capacitor is not decoration: at 600 MHz the feed has to look like a low impedance across the modulation bandwidth, and the bulk bank plus the drain decoupling is what provides it.

The 9.04 A also sets the bias network. A drain choke that carries 9 A without saturating and without a large voltage drop is a substantial component, and its self resonance has to sit above the band. In practice the choke is often replaced by a quarter wave bias line in the microstrip, which removes the component and puts the requirement onto the board geometry.

58.73 W of heat at compression means the flange is the thermal bottleneck. A copper tungsten carrier, a thin sintered or eutectic interface and a liquid cooled plate is the arrangement used by most products at this level. If the base plate runs at 45 C and the total junction to case plus case to plate path is 1.2 C per watt, the junction sits at 115 C, which is inside a gallium arsenide process but leaves little margin for a hot day.

The gate side is easier. 3.16 W of drive is a level a driver transistor can deliver on the same rail, and the sequencing requirement is the usual one: negative gate supply established, then drain, then radio frequency, and the reverse order on shutdown.

Where thirty one watts on this window is used

The 5.3 to 5.9 GHz band carries fixed wireless access, upper band wireless access equipment, point to point links, short range radar and a growing number of industrial sensing systems. At 31.62 W the part suits the transmit end of a point to point terminal, a ground station for a small satellite service, a radar transmitter with a modest aperture, or a laboratory source that has to deliver a calibrated level across the band.

For a licensed point to point link the modulation may be 1024 QAM or higher, and the linearity requirement then dominates. A 45 dBm part run at 36 dBm has nine decibels of back off, which is a great deal of margin for a wideband signal but also means the efficiency is far below the published figure and the heat is set by the quiescent current. Products of that kind often choose a smaller device and accept less output rather than carry the thermal load of a large one running at a quarter of its rating.

For radar and for constant envelope links the part runs near compression, the published row applies, and the 31.62 W with 35 per cent is the operating point. The window covers enough bandwidth for a chirp of several hundred megahertz, which is one of the reasons this band is popular for short range imaging and ranging.

Our defense grade components page covers the traceability and screening questions that come with a radar transmitter, and our RF component sourcing page covers the quotation process for the device, the carrier and the assembly together.

Stopping one step lower

The HXC40021 at 41 dBm and 38 per cent is the sensible alternative for most products. It removes 38 W of heat, cuts the current to a third and removes the need for a multiphase converter, at the cost of four decibels of output. If the link budget closes with 12.59 W, the larger part is 30 W of heat for nothing.

The four decibel gap is the largest single step in this window, and it is the one that changes the enclosure. A product family that needs both points usually shares a board outline and fits a different transistor plus a different converter, which is cheaper than two separate boards. Our RF power transistor cross reference lays the family out for that comparison.

Questions buyers ask before ordering HXC40022

Is 45 dBm at compression or at saturation? At compression. The saturation column carries a slash, so the saturated output is higher and unpublished, and the compression figure is the one to use in a link budget for a linear signal.

Can the part run from a 12 V bus? No. The vendor rail is 10 V. A 12 V bus has to be regulated, and at 9.04 A the converter is a significant part of the product.

Is there a package drawing? Not in text. The product page carries one outline image, and the mechanical drawing has to come from the factory with the quotation.

How do we start? Send the output, the modulation, the duty cycle, the ambient at the mounting surface and the rail. We will confirm the fit, quote from the current schedule and ship a sample with output, gain, efficiency and a thermal measurement at the flange.