Contact Us

HX506030F

Brand: Hisiwell
Hisiwell HX506030F is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HX506030F — Discrete & Power Semiconductors | Superb Automation

HX506030F

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HX506030F from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HX506030F: a 30 W C band row and the 0.7 dB the vendor page adds on top of it

The HX506030F is a gallium nitride RF power transistor from Hisiwell filed on the 50 V table with a 5 to 6 GHz window, a 30 W row and 16 dB of gain. It is the last row of that table and the only one that covers C band, so buyers who arrive from a radar or a satellite uplink bill of materials land here rather than on the wider L and S band rows.

The page behind the row is short, but it carries one number the row does not: the maximum saturated power is 35 W, against 30 W in the table. That is 0.67 dB on power. In a link budget two thirds of a decibel is the difference between a comfortable margin and a marginal one, so the two figures have to be quoted separately and never mixed. The 30 W is the row figure a buyer can quote; the 35 W is a maximum saturated figure that needs a condition attached to it.

Everything else on the page is consistent with the row: 55 per cent optimal drain efficiency, 16 dB power gain, a 48 V supply and a flanged package, described as a device for RF and microwave systems in the 5 to 6 GHz window. What the page does not publish is a pulse condition, a thermal resistance, a load impedance, an orderable addendum or a package drawing, and none of those gaps is unusual on this vendor's rows.

The HX506030F rows as the vendor publishes them

Part classGallium nitride RF power transistor, single ended
Frequency range, index row5 to 6 GHz
Window width, calculated1000 MHz
Band ratio, calculated1.2 to 1
Saturated output, index row30 W
Saturated output, vendor page35 W maximum saturated
Difference between the two rows, calculated0.67 dB on power, 1.17 to 1
Output in dBm, calculated44.77 dBm at 30 W, 45.44 dBm at 35 W
Gain, both sources16 dB
Drive at 30 W and 16 dB, calculated0.75 W, 28.77 dBm
Drive at 35 W and 16 dB, calculated0.88 W, 29.44 dBm
Drain efficiency, both sources55 per cent, described as optimal
DC input at 30 W and 55 per cent, calculated54.5 W
Drain current at 48 V, calculated1.14 A
Heat to remove at 30 W, calculated24.5 W
Drain rail, both sources48 V
Load voltage at 30 W into 50 ohm, calculated38.7 V rms, 54.8 V peak
Peak against the rail, calculated1.14 times
Load voltage at 35 W, calculated41.8 V rms, 59.2 V peak, 1.23 times the rail
Output per gigahertz of window, calculated30 W
Mode, index rowCW
PackageFlanged, body style not published
Thermal resistance, junction to caseNot published
Pulse width and duty cycleNot published
Load impedanceNot published, no load pull table
Data sheetA short product page with three parameters, no part document
Orderable addendumNone published
Applications listedRF and microwave systems

What 30 W at 5 to 6 GHz asks of a 48 V rail and a 50 ohm load

30 W into 50 ohm is 38.7 V rms, which is 54.8 V peak, and that peak is only 1.14 times the 48 V rail. The ratio is the smallest on the 50 V table and it is a consequence of the power level rather than of the topology: a transistor that delivers 30 W into 50 ohm never has to swing far above its supply, so the load line sits close to the rail and the margin inside the device is comfortable.

The number that decides the mechanical build is not the voltage. It is the 24.5 W of heat at 55 per cent efficiency, all of it inside a package whose thermal resistance the vendor does not publish. At C band the die is small, so the heat flux per square millimetre is high, and a flange that looks generous in a photograph can still be the limiting part of the chain. A buyer who needs a junction temperature figure before committing a board has to ask the factory for it, because nothing on the row or on the page will give one.

The 1 GHz window is the second practical constraint. A single fixed network cannot hold 16 dB of gain flat from 5 to 6 GHz, so the part is normally used in a sub band, with the network cut for the 200 or 300 MHz the system actually occupies. The row states one gain figure for the whole window, which is a class figure and not a guarantee at both ends. On a first article, measure at the two edges and at the centre, and treat the row figure as the middle of a spread.

Why the flange and the body matter as much as the last half decibel

The vendor page says the part comes in a flanged package and does not say which one. That is a real gap for anyone building a mechanical assembly, because the flange sets the screw pattern, the height above the carrier and the way the lead is soldered or clamped. Two flanged bodies with the same electrical ratings are not interchangeable on a finished board.

At C band the second mechanical question is the transition from the package lead to the microstrip. A small shift in the lead length changes the input match, and on a 16 dB part that shows up as gain ripple rather than as a failure, which is harder to catch. Buy the devices with a drawing, and ask for the body variant in writing on the purchase order, not as a note in an email thread.

The third point is packaging and handling. No moisture level, no packing quantity and no reflow profile are published, so the incoming goods route has to include a decision on baking and on storage. For a C band part used in a radar or a satellite terminal, an unexplained 2 dB of loss found after assembly is often a handling question before it is a device question.

Where the HX506030F sits on the 50 V shelf

Below it on frequency are the 2 to 4 GHz rows at 370 and 185 W, the 2 to 3.8 GHz row at 300 W and the 2 to 3 GHz row at 370 W. All of them are more than 5 dB above this part in output and all of them stop at 4 GHz, so none is a substitute for a 5 to 6 GHz requirement. The nearest neighbour in frequency is the DC to 6 GHz row at 20 W with 19 dB and 76 per cent, which covers this window and reaches down to DC but gives away 1.76 dB of output and 3 dB of gain at the top of the band.

Read as a choice, the two parts answer different questions. The DC to 6 GHz row is the wideband instrument part; the HX506030F is the narrow C band part with more output and a smaller window. A buyer who needs one amplifier to cover 1 to 6 GHz takes the wideband row and accepts the loss. A buyer who needs 5.5 to 5.9 GHz at 30 W takes this row. The comparison of drive, gain and output across the family is on the RF power transistor cross reference page.

The rail also separates them. Every row in the 2 to 4 GHz group runs on 48 V as well, so a 48 V bus is the common denominator on this shelf, and a system built around a 28 V bus is looking at a different table entirely. Mixing the two rails in one chain means a converter, and a converter in front of a 55 per cent stage costs efficiency twice.

Buying the HX506030F: what the order has to state

The purchase order should carry the part number exactly as the row prints it, the window the system uses inside 5 to 6 GHz, the rail, the duty, the flange or body variant, the quantity and the incoming test. It should also state which power figure the acceptance test is written against, the 30 W row or the 35 W page maximum, because a vendor asked to meet 35 W in CW at 6 GHz will answer differently from one asked to meet 30 W.

For the incoming gate, gain and output at three frequencies inside the window are the minimum, and a record of the drive level at each point is what makes the numbers comparable between batches. A device that meets power with 1 dB more drive has changed the stage in front of it, and the change will not show up in a report that lists output only. The record format is set out on the incoming inspection plan page.

If the C band stage sits inside a larger assembly, the driver, the circulator, the coupler and the passives can be consolidated against one delivery date rather than bought one line at a time, which is what the one stop RF supply page describes. Consolidation matters most on a part like this one, where a missing flange drawing can hold a whole build.

Questions buyers ask about the HX506030F

Is it 30 W or 35 W? The row says 30 W and the page says 35 W maximum saturated. Quote 30 W unless the factory confirms 35 W at your frequency, rail and duty in writing.

How much drive does it need? 16 dB of gain puts the drive at 0.75 W for 30 W, which is 28.77 dBm, and 0.88 W for 35 W. That is a single driver stage in most systems, and it belongs in the budget from the first draft.

Does it cover 4 to 6 GHz? No. The row window starts at 5 GHz. For 4 GHz take the 2 to 4 GHz rows.

What is the thermal resistance? Not published, on the row or on the page. It has to come from the factory before a junction temperature can be closed.

Is there a data sheet? Only a three line product page. There is no part document, no load pull table and no package drawing, so the mechanical interface has to be agreed separately.