Contact Us

HX04200F

Brand: Hisiwell
Hisiwell HX04200F is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HX04200F — Discrete & Power Semiconductors | Superb Automation

HX04200F

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HX04200F from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HX04200F: 200 W on the index, 219 W on the parameter list, DC to 4 GHz on 48 V

The HX04200F is the 4 GHz member of the Hisiwell 48 V group: a gallium nitride power transistor with high efficiency and high gain, in a flanged package, for applications up to 4 GHz. The index gives it 200 W, 20 dB of gain, 70 per cent drain efficiency and a 48 V rail. The product page gives a maximum saturated power of 219 W and a best drain efficiency of 80.7 per cent.

Here the two sources agree in direction rather than in value. 219 W is 0.39 dB above 200 W, which is a normal spread between an index row and a measured maximum, and 80.7 per cent against 70 per cent is the difference between a best point and a nominal figure. Compared with the 2.5 GHz members of the same shelf, where the index and the parameter list differ by a factor of 1.67 and 1.88, this part is the consistent one.

That consistency is worth a paragraph. A buyer who has been burned by a 600 W index row that turned out to be a 320 W part will read a 219 W parameter against a 200 W index as a well documented device. Both sets are published, both are close, and the flanged body is stated on the description rather than left implicit.

The HX04200F rows, index against parameter list

Part classGallium nitride power transistor, flanged package, high efficiency and high gain
Frequency range, index rowDC to 4 GHz
Frequency range, descriptionApplications up to 4 GHz
Output, index row200 W
Output, parameter listMaximum saturated power 219 W
200 W in dBm, calculated53.01 dBm
219 W in dBm, calculated53.40 dBm
Parameter over index, calculated0.39 dB
Gain, index row20 dB
Efficiency, index row70 per cent
Efficiency, parameter listBest drain efficiency 80.7 per cent
Supply48 V
PackageFlanged, stated in the description
Thermal resistance, junction to caseNot published
Gate bias point and quiescent currentNot published
Load impedance, source and loadNot published
Applied application listRF and microwave systems
Datasheet linkNot a resolvable file on the public page
Orderable addendum and packing dataNone published

Twenty rows with five electrical figures is a reasonable middle ground on this shelf. Gain and efficiency and power and rail are all stated, and the three that are missing are the three that always go missing here: thermal resistance, bias point and load impedance. On a flanged part those are the three a mechanical and a board engineer ask for first.

The frequency wording carries no conflict this time. DC to 4 GHz and up to 4 GHz describe the same window, and unlike the push-pull member of the shelf, there is no HF convention to reconcile. That is a small thing that saves a question.

Two hundred watts on 48 V

CaseDC input, calculatedDrain current at 48 V, calculatedHeat, calculated
200 W at 70 per cent, index pair286 W5.95 A86 W
219 W at 80.7 per cent, parameter pair271 W5.65 A52 W
200 W at 80.7 per cent, mixed248 W5.17 A48 W
219 W at 70 per cent, mixed313 W6.52 A94 W
150 W at 70 per cent, backed off214 W4.46 A64 W

The spread here is small. Between the worst and the best corner the current moves 1.35 A and the heat moves 46 W, which is the arithmetic of a well matched index and parameter list. Compare that with the 2.5 GHz members of the shelf, where the same exercise moves the current by 5.6 A and the heat by 110 W. Documentation quality is visible in these tables and it is measurable.

Six amps at 48 V is a single supply with an ordinary choke, and the dissipation of 50 to 95 W at 200 W output is a flange on a spreader with forced air or a modest cold plate. On the 4 GHz window that is the practical sweet spot: enough power to remove a combining stage, little enough heat that the mechanical build stays ordinary.

At the output, 200 W into 50 ohm is 100.0 V RMS and 141.4 V peak by calculation, 200.0 V peak under a two to one mismatch. That peak is exactly the 200 V capacitor limit, which means a two to one mismatch at full power takes the output network to its rating and not past it. A customer planning a three to one mismatch needs a different capacitor family.

The 4 GHz window against the rest of the shelf

HX04200F200 W index, 219 W parameterDC to 4 GHz20 dB gain, 70 and 80.7 per cent efficiency48 V, flanged
HX2040370P370 W2 to 4 GHz18 dB gain, 70 per cent48 V, needs 2 GHz at the bottom
HX2040185P185 W2 to 4 GHz18 dB gain, 70 per cent48 V, similar power, no DC
HX25400F400 W index, 240 W parameterDC to 2.5 GHz19 and 19.5 dB gain, 71 and 82 per cent48 V, stops at 2.5 GHz
HX25600F600 W index, 320 W parameterHF to 2.5 GHz17 and 19 dB gain, 69 and 79 per cent48 V, full data sheet
HXN50141280 WDC to 3 GHzGain and efficiency not published50 V rail

The HX2040370P is the obvious power upgrade and it costs the bottom of the band. Three hundred and seventy watts from 2 to 4 GHz is 2.67 dB above this part, but a customer working at 900 MHz cannot reach it. The HX2040185P is the near neighbour in power with the same 2 GHz floor, so the whole 4 GHz group splits into two populations: DC to 4 GHz at 200 W, and 2 to 4 GHz at 185 and 370 W.

Against the 2.5 GHz members the trade is band for power. The HX25600F offers more paper power and a complete data sheet, and it stops at 2.5 GHz. A customer whose product needs the 3.5 GHz band cannot use it at all, and that is the whole decision.

The family comparison is on the RF power transistor cross reference, and the sourcing route for a measured sample at 3.5 GHz is on the RF component sourcing page.

Ordering, flange and documents

No orderable addendum, packing column, marking code or moisture level is published, and this page quotes none. The order should carry the part number, the flanged body, the 48 V rail, the band, the mode, the output point, the drive level and the quantity. The flange is the one mechanical feature the vendor states, so the drawing request is reasonable and should go with the first order.

The three missing numbers are worth requesting together: thermal resistance, gate bias point and load impedance at the frequency of use. On a 4 GHz part the load impedance is the one that changes fastest with frequency, so a table at two or three points across the band is more useful than a single figure at the centre.

Lead time is not published. The variables are the flange stock, the die attach and the test, and none of them appear on the index row. A date quoted before those are answered is a placeholder and should be recorded as one.

Where a second source at this band is being qualified, the one stop RF supply page covers the measurements that have to be repeated on the board.

Questions buyers ask about the HX04200F

Is 219 W the same as the 200 W index figure? They are 0.39 dB apart and come from two different statements on the same page. The parameter list is the measured maximum and the index is the catalogue figure. Both can be quoted if the source is named.

Which efficiency do I size against? The 70 per cent index figure is the nominal one and 80.7 per cent is the best point. On a wideband part the best point is normally near the low end, so 70 per cent is the safer number for a 4 GHz build.

Is the 48 V rail the only option? The page states 48 V. Unlike the 2.5 GHz members of the shelf there is no dual 28 V claim here, so a 28 V build would be a factory question.

Is there a data sheet? No resolvable file is linked from the public page. The document has to be requested and checked against the part number on the label.

Where the 4 GHz group has to be compared against the 2.5 GHz group on one axis, the reference is the cross reference page.