Contact Us

CDR14BP332AJSM KYOCERA AVX RF Capacitor

Brand: ATC
The CDR14BP332AJSM is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

CDR14BP332AJSM — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The CDR14BP332AJSM is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part NumberCDR14BP332AJSM
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part NumberCDR14BP332AJSM
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source CDR14BP332AJSM from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order CDR14BP332AJSM or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

CDR14BP332AJSM: 3300 pF at 50 V in the CDR14 outline

Read CDR14BP332AJSM from the left and every position is already decided. CDR14 is the style, BP is the dielectric, 332 is the capacitance code, two significant digits and a count of zeros, which reads 3300 pF, A is the voltage field at 50 V, J is the tolerance letter at plus or minus 5 percent, S is the termination and M is the failure rate level at 1.0 percent. A number this complete leaves the buyer one job, which is to confirm that the drawing in front of them carries the same letters.

Style and outlineCDR14, military style in the 0.110 inch square outline
DielectricBP, zero plus or minus 30 ppm per degree C
Capacitance3300 pF, code 332
ToleranceJ, plus or minus 5 percent, a window of 3135 to 3465 pF
Rated voltage50 VDC, voltage letter A
TerminationS, solder coated final with a minimum of 4 percent lead
Failure rate levelM, 1.0 percent
QualificationMIL-PRF-55681, slash sheet 4 covers styles CDR11 to CDR14
Style capacitance range0.1 pF to 5100 pF, 200 and 500 V on the small values
Body length2.79 plus 0.889 minus 0.508 mm
Body width2.79 plus or minus 0.508 mm
Body thickness0.762 to 2.59 mm
Termination band0.127 to 0.635 mm
Operating rangeminus 55 to plus 125 degrees C with and without rated voltage
Temperature drift over the rangeabout 17.8 pF at 30 ppm per degree C
Reactance at 150 MHz0.32 ohm nominal
Reactance at 1 GHz0.05 ohm nominal
Reactance at 2.45 GHz0.02 ohm nominal
Stored energy at rated voltage0.0 nanojoule at 50 V
Packingwaffle pack 80 pcs, or tape and reel 2000 pcs on a 7 inch reel

The style letter is what sets the body, not the value. CDR14 is the 0.110 inch square outline, 2.79 plus 0.889 minus 0.508 mm long, 2.79 plus or minus 0.508 mm wide and between 0.762 to 2.59 mm thick, and the sheet groups that outline with a capacitance range of 0.1 pF to 5100 pF, 200 and 500 V on the small values. Two parts with the same 3300 pF value and different style letters are therefore different bodies on the same drawing.

At 3300 pF the letter J is worth plus or minus 5 percent, so the accepted window is 3135 to 3465 pF. That number, not the nominal, is what incoming inspection measures, and on a 50 V part it is read together with the coefficient rather than on its own.

CDR14 body, termination and packing

The body is 2.79 plus 0.889 minus 0.508 mm long, 2.79 plus or minus 0.508 mm wide and 0.762 to 2.59 mm thick, with a termination band of 0.127 to 0.635 mm. Those four figures come from the outline table and do not change with the value, so the 3300 pF part at 50 V is placed with the same nozzle as the next value up the table.

Finish is written into the number, not onto a note: S is solder coated final with a minimum of 4 percent lead. That is the line a process engineer reads before releasing the part to a reflow profile, because the same capacitance at 50 V with a different finish letter is a different solderability case.

Dielectric and rating at 50 V

BP is a temperature stable dielectric, which the sheet prints as zero plus or minus 30 ppm per degree C, with and without rated voltage, from minus 55 to plus 125 degrees C. Over that 180 degree span a 3300 pF part moves by about 17.8 pF, which is 0.002 ohm at 150 MHz against the 0.32 ohm it presents nominally.

Two fields have to be read together on a 50 V part: the voltage letter A sets the rating and the failure rate letter M sets the screening level, 1.0 percent. Neither changes the capacitance, and both change what the order costs and what the lot record has to show.

What 3300 pF does from 30 MHz to 2.45 GHz

At 30 MHz the 3300 pF body at 50 V presents 1.61 ohm, at 150 MHz 0.32 ohm, at 500 MHz 0.10 ohm, at 1 GHz 0.05 ohm and at 2.45 GHz 0.02 ohm, and against a 50 ohm line the value is already below 50 ohm at the bottom of the band, because the crossing sits at about 1.0 MHz. Those numbers, not the printed capacitance, decide whether the part works as a coupling element or as a small series impedance.

As a series coupling element into 50 ohm the 3300 pF value turns over at 1.0 MHz. That is a statement about the 3300 pF body at 50 V in a 50 ohm system only, and it moves if the surrounding impedance moves, so it is quoted with the load rather than on its own.

For loss, the family is documented by curves rather than by limits, so nothing in this block quotes an ohm value or an ampere figure. What can be computed for the 3300 pF part at 50 V is the reactance column above, the drift across the temperature range and the 0.0 nanojoule of stored energy at the rated voltage, and those three are enough to place the part before a curve is consulted.

Stored energy at the rating is 0.0 nanojoule on the 3300 pF part, from one half C V squared, and the stored charge is 165 nanocoulomb at 50 V. On a 50 V rail those two figures describe what a discharge path has to absorb, which matters in a stage where the capacitor sits across a supply rather than in a signal line.

Sourcing the 3300 pF value and the second source

Packing for CDR14BP332AJSM is a waffle pack of 80 pieces, or tape and reel on an 8 mm carrier with 2000 pieces on a 7 inch reel and 10,000 on a 13 inch reel, per EIA RS481 and IEC 286 part 3. On a 3300 pF order at 50 V that count sets how many boards one package covers. One Stop RF Supply, Pin to Pin Cross Reference, Date Code Management covers the sourcing side for a board that needs its other RF parts as well, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.

At 50 V and 3300 pF the buying question is not only price: the failure rate letter, the date code and the storage grade set what the line can accept. A replacement is checked on capacitance, tolerance, voltage, dielectric and outline, and the screening level is compared at the same time, because the failure rate letter inside the part number is a screening statement and not a freight detail.

For the 3300 pF value at 50 V the sourcing conversation is short once the drawing is in hand: capacitance code, tolerance letter, voltage letter, termination and failure rate level, then the packing quantity. Everything after that is date code, packing and freight, and those are quoted rather than assumed.