CDR14BG6R8ECSM KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
CDR14BG6R8ECSM — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The CDR14BG6R8ECSM is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | CDR14BG6R8ECSM |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | CDR14BG6R8ECSM |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source CDR14BG6R8ECSM from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order CDR14BG6R8ECSM or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
CDR14BG6R8ECSM: 6.8 pF at 500 V in the CDR14 outline
Field by field, CDR14BG6R8ECSM reads style CDR14 in the 0.110 inch square outline, dielectric BG, 6R8 holds the decimal place in the R position, so the value is 6.8 pF, voltage field E at 500 V, tolerance C, termination S and failure rate level M. The printed window is plus or minus 0.25 pF, so the 6.8 pF part that arrives is accepted between 6.550 and 7.050 pF and no wider.
| Style and outline | CDR14, military style in the 0.110 inch square outline |
| Dielectric | BG, plus 90 plus or minus 20 ppm per degree C |
| Capacitance | 6.8 pF, code 6R8 |
| Tolerance | C, plus or minus 0.25 pF, a window of 6.550 to 7.050 pF |
| Rated voltage | 500 VDC, voltage letter E |
| Termination | S, solder coated final with a minimum of 4 percent lead |
| Failure rate level | M, 1.0 percent |
| Qualification | MIL-PRF-55681, slash sheet 4 covers styles CDR11 to CDR14 |
| Style capacitance range | 0.1 pF to 5100 pF, 200 and 500 V on the small values |
| Body length | 2.79 plus 0.889 minus 0.508 mm |
| Body width | 2.79 plus or minus 0.508 mm |
| Body thickness | 0.762 to 2.59 mm |
| Termination band | 0.127 to 0.635 mm |
| Operating range | minus 55 to plus 125 degrees C with and without rated voltage |
| Temperature drift over the range | about 0.1102 pF at 90 ppm per degree C |
| Reactance at 150 MHz | 156.0 ohm nominal |
| Reactance at 1 GHz | 23.4 ohm nominal |
| Reactance at 2.45 GHz | 9.55 ohm nominal |
| Stored energy at rated voltage | 0.0 nanojoule at 500 V |
| Packing | waffle pack 80 pcs, or tape and reel 2000 pcs on a 7 inch reel |
On this family the outline comes first and the value second. CDR14 is the 0.110 inch square body, 2.79 plus 0.889 minus 0.508 mm by 2.79 plus or minus 0.508 mm with 0.762 to 2.59 mm of thickness, and the 6.8 pF value is one line inside that. A board that carried a CDR14 part keeps the same pad if the outline letter stays and the value moves, which is the swap most programs actually make.
The tolerance letter deserves the second look. C on 6.8 pF pins the part to plus or minus 0.25 pF, a band of 6.550 to 7.050 pF, and a letter that reads close on a quotation can widen that band five times over. At 500 V the value and the letter together decide whether the part lands in a tuned stage or is rejected at first article.
CDR14 body, termination and packing
For the 6.8 pF part the mechanical facts are simple: 0.110 inch square outline, 2.79 plus 0.889 minus 0.508 mm long by 2.79 plus or minus 0.508 mm wide, 0.762 to 2.59 mm thick, termination band 0.127 to 0.635 mm. Nothing in that changes when the capacitance or the voltage field changes, which is what makes a like for like replacement possible on an existing board.
The termination field matters as much as the case. S means solder coated final with a minimum of 4 percent lead, so the solderable finish is declared inside the part number, and a line that is running lead free has to choose a different letter rather than assume a different plating. On a 6.8 pF order at 500 V that letter travels with the part into incoming inspection.
Dielectric and rating at 500 V
Read the coefficient as the promise and the tolerance as the contract. The dielectric BG is held to plus 90 plus or minus 20 ppm per degree C over minus 55 to plus 125 degrees C, which on 6.8 pF is about 0.1102 pF, while the letter C fixes plus or minus 0.25 pF. The larger of the two is what a tuned stage actually sees.
The rating is 500 VDC against voltage field E. The sheet prints no withstanding test multiple for this family, so no percentage claim is made here, and it prints typical Q and ESR curves rather than a single ohmic limit, so the loss figure for a 6.8 pF part at 500 V comes from that curve set and from the supplier data.
What 6.8 pF does from 30 MHz to 2.45 GHz
On the 6R8 code at 500 V the reactance column reads 780.2 ohm at 30 MHz, 156.0 ohm at 150 MHz, 46.8 ohm at 500 MHz, 23.4 ohm at 1 GHz and 9.55 ohm at 2.45 GHz, and the value reaches 50 ohm at about 468 MHz, inside the band. A body this small is bought for the shift it adds to a node, not for its printed number.
With a 50 ohm load in series the half power point of a 6.8 pF part sits at 468 MHz, the frequency where its reactance equals the load. Below that point the capacitor sets the loss and above it the same part is close to a short, which on a 500 V stage is the number to quote when one position has to pass a band and block a DC feed.
Loss is the one place where this sheet deliberately stops short: typical Q against frequency, typical ESR against frequency, typical Q and ESR against capacitance, and no single ceiling. A 6.8 pF body at 500 V is therefore specified on the published curves, and the arithmetic here is limited to reactance and stored energy, which are printed facts.
The energy question has a short answer for this part: 0.0 nanojoule at 500 V, with 3.40 nanocoulomb of charge. Against the plus or minus 0.25 pF tolerance window the energy figure moves with the square of the applied voltage, so a 500 V part used at half the rating carries a quarter of that energy.
Sourcing the 6.8 pF value and the second source
For CDR14BG6R8ECSM at 500 V the order needs the capacitance code, the tolerance letter, the voltage letter, the termination and the failure rate level, plus a packing quantity. One Stop RF Supply, Kitting Service, Date Code Management carries the sourcing side, and a replacement is checked on those five fields before date code and lot records are compared. SUPERB works as a sourcing and assembly partner for RF, medical, telecom, military and radar programmes, so the discussion starts from the bill of materials and the schedule.
A 6.8 pF part at 500 V is a line item before it is a component, so the order carries the package quantity, the date code and the incoming check together with the part number. Where the value has to be replaced, the second source is matched on the five fields the order code exposes, capacitance, tolerance, voltage, dielectric and outline, and only then on the certificate.
On a 6.8 pF part at 500 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The fields to compare are capacitance, tolerance, voltage, dielectric and outline, and the failure rate letter then decides how much screening the lot has already seen.