700E561JW2500X KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
700E561JW2500X — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 700E561JW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 700E561JW2500X |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 700E561JW2500X |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 700E561JW2500X from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 700E561JW2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
700E561JW2500X: 560 pF at 2500 V in the case E outline
Read 700E561JW2500X left to right and every field was set before the reel was cut. 700E is the NPO porcelain series built for high RF power, E is the case, a 0.380 inch square that runs 9.65 mm by 9.65 mm with a 1.02 mm maximum overlap between termination and ceramic, and 561 is the capacitance code, first two digits significant and the third the count of zeros, which makes this a 560 pF part. J fixes the window at plus or minus 5 percent, W is tin lead solder plated over a nickel barrier, 2500 is the working voltage in volts DC, and X is the optional laser marking. No packing letter follows the X here, so tape and reel at 250 pieces, a tray of 24 or a tray of 96 is chosen when the order is placed.
| Series and case | 700E, case E, 0.380 inch square outline, 9.65 mm by 9.65 mm |
| Capacitance | 560 pF, code 561 |
| Tolerance | J, plus or minus 5 percent, a window of 532 to 588 pF |
| Working voltage | 2500 VDC |
| Dielectric withstanding | 3000 V for five seconds, 120 percent of the working voltage |
| Life test | 2500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage |
| Temperature coefficient | zero plus or minus 30 ppm per degree C |
| Operating range | minus 55 to plus 125 degrees C, no derating of working voltage |
| Quality factor | greater than 10,000 at 1 MHz |
| Insulation resistance | 10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C |
| Insulation test voltage | 500 VDC, the voltage the resistance figure is measured at |
| Leakage floor | about 5.0 microampere at the 500 VDC test, from the 10^5 Mohm floor |
| Stored energy | 1750 microjoule at 2500 V, from one half C V squared |
| Stored charge | 1400 nanocoulomb at 2500 V |
| Drift and retrace | plus or minus 0.02 percent or 0.02 pF, whichever is greater |
| Reactance at 150 MHz | 1.89 ohm nominal |
| Reactance at 500 MHz | 0.57 ohm nominal |
| Reactance at 1 GHz | 0.28 ohm nominal |
| Body and termination | 9.65 mm square outline, 1.02 mm maximum overlap, 10 lbs minimum and 25 lbs typical pull |
| Mounting pad | A 10.29, B 1.27, C 8.26 and D 10.80 mm on the normal horizontal mount row |
TDS-RFM-0020 prints 1 pF to 2200 pF as the capacitance range and minus 55 to plus 125 degrees C as the operating range, with no derating of working voltage across it. What moves inside the range is the frequency the quality factor is quoted at: up to 1000 pF the figure is greater than 10,000 at 1 MHz, and from 1100 pF it is greater than 10,000 at 1 kHz. The 560 pF value sits on the lower capacitance side of that line, so it carries greater than 10,000 at 1 MHz, while the 2500 V working voltage comes from the voltage field of the order code.
The body is described as an NPO porcelain multilayer capacitor in a rugged hermetic package, built for high RF current and high RF voltage with low equivalent series resistance and low equivalent series inductance. The sheet also lists an encapsulation option, which applies to leaded styles only and not to the W termination on this part. At the receiving bench a 560 pF body at 2500 V is checked on the marking, the measured value and the voltage field, with quality factor measured at better than 10,000 at 1 MHz.
Case E outline and the land pattern for 560 pF
Case E is a 0.380 inch square, printed as 9.65 mm plus 0.38 minus 0.25 mm on the length and 9.65 mm on the width, with a 1.02 mm maximum overlap where the termination meets the ceramic. The terminal pull is 10 lbs minimum and 25 lbs typical for five seconds, taken perpendicular to the termination surface to MIL-STD-202 method 211, so the joint is stressed in the direction the board actually sees. The horizontal mount land for the 560 pF value is A 10.29, B 1.27, C 8.26 and D 10.80 mm on the normal row, and the high density row trims the same land to A 9.73, B 0.76, C 8.26 and D 9.78 mm where the board is tight.
Two land columns are printed for case E: the normal row is A 10.29, B 1.27, C 8.26 and D 10.80 mm and the high density row is A 9.73, B 0.76, C 8.26 and D 9.78 mm. On the 560 pF part the normal row applies, and the high density row is the alternative when the board is tight rather than a different part. The mechanical table prints a thickness for the leaded microstrip style but leaves it empty for the W surface mount style, so no thickness figure is quoted for this part.
Electrical limits at 2500 VDC
The electrical identity of the 560 pF part is a temperature coefficient of zero plus or minus 30 ppm per degree C over minus 55 to plus 125 degrees C with no derating of working voltage, greater than 10,000 at 1 MHz, and a 2500 V rating backed by a withstanding test at 3000 V for five seconds, which is 120 percent of the rating. Capacitance drift is plus or minus 0.02 percent or 0.02 pF, whichever is greater, retrace is inside the same window, aging and piezoelectric effects are both stated as none, and the resistance floor of 10^5 Mohm at 25 degrees C and 10^4 Mohm at 125 degrees C is measured at 500 VDC, which is about 5.0 microampere at that test.
The resistance figure needs one reading note: the sheet measures insulation resistance at 500 VDC at both temperature steps, so a 2500 V part is tested for resistance at 500 V and not at its rating. Thermal shock follows MIL-STD-202 method 107 condition A, moisture resistance method 106, and low voltage humidity method 103 condition A at 85 degrees C and 85 percent for 240 hours with 1.5 VDC applied. Terminal strength is 10 lbs minimum and 25 lbs typical for five seconds to method 211.
What 560 pF does from 30 MHz to 1 GHz
At 30 MHz the 560 pF body presents 9.47 ohm, at 150 MHz 1.89 ohm, at 500 MHz 0.57 ohm and at 1 GHz 0.28 ohm, and on a 50 ohm line the value reaches 50 ohm at about 5.7 MHz, inside the band. Those four numbers are what a match is built around, and they are why the capacitance code is quoted with the voltage field: a part reading 1.89 ohm at 150 MHz is a series element in one stage and a shunt leg in another. Tolerance reads better in ohms than in picofarads at this value. The J window of 532 to 588 pF lands at 1.80 ohm at the top and 1.99 ohm at the bottom against a 1.89 ohm nominal at 150 MHz, a spread of 0.19 ohm, which is 10.0 percent of the reactance and 5.0 percent of the printed value.
Quality factor for this 560 pF value is greater than 10,000 at 1 MHz, and the sheet leaves equivalent series resistance and self resonance to curves drawn against capacitance for series 700 case E rather than to a table cell, so a resonance number quoted for the value by a broker is a claim and not a specification. The roles named for the family are bypass, coupling, tuning, impedance matching and DC blocking, inside HF and RF power amplifiers, transmitters, plasma chambers, antenna tuning and medical MRI coils, and at 2500 V the 560 pF part takes the coupling or blocking position where 1.89 ohm at 150 MHz is what the stage sees.
Sourcing the 560 pF value and the second source
A 560 pF part at 2500 V is a line item before it is a component, so the order carries the reel quantity, the date code and the incoming check together with the part number. One Stop RF Supply, Pin to Pin Cross Reference, Date Code Management covers the sourcing side for a board that also needs its other RF parts, and where the value has to be replaced the second source is matched on capacitance, tolerance, voltage and case before a sample is released to the line. SUPERB supports sourcing and assembly work around radio frequency, medical, telecom, military and radar builds, and the part on this page is supplied through channel stock rather than produced here.
The packing letters on the sheet are T for tape and reel at 250 pieces, J24 for a tray of 24 and J96 for a tray of 96, so the count is a decision recorded on the order rather than a note added later. On a 560 pF line item at 2500 V that quantity sets how many boards one reel covers, and a second source discussion starts from the same four fields: capacitance, tolerance, voltage and case.