Contact Us

118CL820M100TT KYOCERA AVX RF Capacitor

Brand: ATC
The 118CL820M100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

118CL820M100TT — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 118CL820M100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number118CL820M100TT
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number118CL820M100TT
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 118CL820M100TT from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 118CL820M100TT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

118CL820M100TT: 82.0 pF single layer capacitor at 100 V

Five fields sit inside 118CL820M100TT and each one changes what arrives. Case C sets the outline at 0.015 inch (0.381 mm), dielectric L sets the material, the value is 82.0 pF, tolerance M gives plus or minus 20 percent, and the 100 V field with TT termination closes the string. The whole part is described before any paperwork is opened.

Series and outline118 Series, single sided recessed metalization, case C at 0.015 inch (0.381 mm)
DielectricL, dielectric constant 16000
Capacitance82.0 pF, code 820
ToleranceM, plus or minus 20 percent, a window of 65.6 to 98.4 pF
Rated voltage100 VDC, three digit voltage field
TerminationTT, titanium tungsten with nickel and gold, standard finish
Termination optionTX, titanium tungsten with gold, on request
Body thickness0.0045 to 0.012 inch (0.114 to 0.305 mm)
Recessed metalization0.011 inch (0.279 mm)
Border0.001 inch (0.0254 mm) minimum, one side only
Capacitance range0.05 pF to 1800 pF for the series
Operating frequencyprinted up to 100 GHz for the series
Case width and length0.015 inch (0.381 mm) square, area plus zero minus 0.003 inch
Capacitance code readingtwo significant digits, R marks the decimal point
Dielectric style fieldone or two characters, L on this part
Voltage fieldthree significant digits, 100 V standard
Reactance at 1 GHz1.94 ohm nominal
Reactance at 2.45 GHz0.79 ohm nominal
Stored energy at 100 V410 nanojoule
Stored charge at 100 V8.20 nanocoulomb

Because the value is small, the letter matters more than the number: 82.0 pF with tolerance M accepts 65.6 to 98.4 pF and nothing outside it. A part ordered at 100 V with a different letter is the same body, the same pad and a different circuit.

Look at 118CL820M100TT as a sequence of gates rather than a name. 118 opens the single sided recessed metalization family, case C fixes the outline at 0.015 inch (0.381 mm), dielectric L fixes the material, 82.0 pF carries the value, and the trailing fields close it at plus or minus 20 percent tolerance, 100 V and TT termination. Every gate can be checked against the drawing, which is why the number is quoted in full on a purchase order.

Case C body, recessed metalization and TT termination

At 82.0 pF and 100 V the body is a C outline, 0.015 inch (0.381 mm) square, between 0.0045 and 0.012 inch thick, with the area held to plus zero minus 0.003 inch. That is a single layer chip with a recessed termination area on one side, placed like any small chip and bonded where the assembly calls for a wire.

The recess is the point of this series. Metalization is set back 0.011 inch (0.279 mm) on case C and 0.012 inch on the larger cases, with a border of 0.001 inch minimum on one side, so the exposed border can be seen by automated visual equipment and the solder resist area between the terminations is wider. That is what lowers the chance of a short across the part during epoxy or solder attachment.

The finish on this part is declared inside the number. TT means titanium tungsten, nickel and gold, the standard for the 118 Series, with TX as the gold only option printed on the same page. The choice changes the surface a solder joint or a wire bond lands on, so it is quoted with the number and not after it.

Dielectric L at K 16000 and the 100 V field

Read the material first: L, constant 16000, and a value grid printed for each case. The 82.0 pF part on case C is one cell of that grid, and the tolerance letter M is what narrows the cell to the 65.6 to 98.4 pF band a receiver will measure.

The voltage field is 100, which the catalogue prints as its standard value for the series, written as three significant digits in the part number. Nothing about the outline changes with the field, so a 82.0 pF part at 100 V and the same part at another rating share a drawing and not a specification.

This series is specified on outline, value grid and termination, not on a loss number. The 118 page prints no ESR, no Q and no dissipation factor, so a loss budget is taken from the curve page for the dielectric rather than from a single ceiling. What can be computed for a 82.0 pF part at 100 V is the reactance column below and the energy at the rating.

What 82.0 pF does from 30 MHz to 2.45 GHz

On a 82.0 pF value at 100 V the reactance column reads 64.7 ohm at 30 MHz, 12.9 ohm at 150 MHz, 3.88 ohm at 500 MHz, 1.94 ohm at 1 GHz and 0.79 ohm at 2.45 GHz, and against a 50 ohm line it reaches 50 ohm at about 38.8 MHz, inside the band. A single layer part this small is bought for the shift it adds to a node, so the column above is the first thing to read after the value.

Into a 50 ohm load the half power point of a 82.0 pF part sits at 38.8 MHz, where reactance equals load. Below that point the capacitor sets the loss in the line and above it the same body is close to a short, which on a 100 V stage is the number to quote when one position has to pass a band and block a DC feed.

Where this value is used is printed on the page: matching and filtering circuits, bypass and coupling, chip and wire construction, and microwave integrated circuits built with automated MIC equipment. At 100 V the same 82.0 pF part serves a bias feed or a matching stub, and the band above says which of the two it can be.

Energy is a short answer here: 410 nanojoule at 100 V with 8.20 nanocoulomb of charge. Because energy rises with the square of applied voltage, the same part run at half the rating carries a quarter of that figure.

Sourcing the 82.0 pF value and the second source

For 118CL820M100TT at 100 V the order needs the capacitance code, the tolerance letter, the dielectric style, the case letter and the termination, plus a pack quantity. One Stop RF Supply, Kitting Service, Date Code Management carries the sourcing side, and a replacement is checked on those fields before date code and lot records are compared. SUPERB works as a sourcing and assembly partner for RF, medical, telecom, military and radar programmes, so the discussion starts from the bill of materials and the schedule.

A 82.0 pF part at 100 V is a line item before it is a component, so the order carries the pack quantity, the date code and the incoming check together with the number. Where the value has to be replaced, the second source is matched on capacitance, tolerance, voltage, dielectric and case, and only then on the certificate.

On a 82.0 pF part at 100 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The fields to compare are capacitance, tolerance, voltage, dielectric and case, and the case letter is confirmed at the same time because it sets the pad.