Contact Us

116ZHC111J100TT KYOCERA AVX RF Capacitor

Brand: ATC
The 116ZHC111J100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

116ZHC111J100TT — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 116ZHC111J100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number116ZHC111J100TT
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number116ZHC111J100TT
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 116ZHC111J100TT from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 116ZHC111J100TT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

116ZHC111J100TT: 110 pF single layer capacitor at 100 V

Read 116ZHC111J100TT from the left and every position is already fixed. The first three characters name the 116 Series, the next letter is the case, HC follows as the dielectric code, 111 carries two significant digits and a count of zeros, which reads 110 pF, the letter after that is the tolerance at plus or minus 5 percent, 100 is the voltage field and the closing TT is the termination. Nothing in that string is a preference, so the order is checked against the number rather than against the family name.

Series and outline116 Series Microcap, single layer, case Z at 0.090 inch (2.29 mm)
DielectricHC, dielectric constant 420
Capacitance110 pF, code 111
ToleranceJ, plus or minus 5 percent, a window of 104 to 116 pF
Rated voltage100 VDC, three digit voltage field
TerminationTT, titanium tungsten with nickel and gold, over 100 micro inch gold
Body thickness0.0045 to 0.012 inch (0.114 to 0.305 mm)
Dielectric capacitance range1.1 to 180 pF
Operating frequencyprinted up to 100 GHz for the single layer family
Insulation resistance1 x 10^11 ohm minimum at plus 25 degrees C at rated voltage
Dielectric test250 percent of rated voltage for 5 seconds
Environmental limitsbuilt to meet the limits of MIL-C-49464
Test methodsMIL-STD-202 methods 104, 106, 108, 208 and 210
Life test conditionplus 125 degrees C at twice rated voltage
Series resonanceprinted as a typical curve only, with no numeric table
Bond strengthMIL-STD-883 method 2019 die shear
Wire bondabilityMIL-STD-883 method 2011 and MIL-C-49464 paragraph 3.12
RoHScompliant, as for every product in this catalogue
Reactance at 1 GHz1.45 ohm nominal
Stored energy at 100 V550 nanojoule

The tolerance letter is the field that decides acceptance. J on 110 pF pins the part to plus or minus 5 percent, a window of 104 to 116 pF, and a letter read as close on a quotation can widen that band several times over. On a tuning position at 100 V that window, not the nominal value, is what the first article measures.

The last five characters of 116ZHC111J100TT are as load bearing as the first three: the tolerance letter J, the 100 V field and the TT finish decide what the part is accepted at and how it is attached. On a 110 pF body that leaves nothing ambiguous for a second source to interpret, which is the point of a printed number.

Case Z body, TT termination and assembly

Case Z is 0.090 inch (2.29 mm) square, and the body thickness of the 116 Series runs from 0.0045 to 0.012 inch (0.114 to 0.305 mm). On a 110 pF part at 100 V that outline is what the placement and the bond program work from, so a value change inside the same case letter keeps the footprint as it is.

The finish on this part is declared inside the number. TT means titanium tungsten, nickel and gold, over 100 micro inch gold over 1500 to 2000 angstrom nickel over 500 angstrom titanium tungsten, the standard finish for the family, and it is the layer a process engineer reads before choosing between solder and a wire bond on a 110 pF part.

Dielectric HC and the 100 V rating

Dielectric HC is a mid K material with a dielectric constant of 420, and the sheet prints its coefficient as minus 2000 plus or minus 750 ppm per degree C from minus 55 to plus 125 degrees C. On 110 pF that is about 39.6 pF across the range, small against the plus or minus 5 percent the tolerance letter allows, so the coefficient and the window are read together rather than in turn.

HC is the coefficient of 116ZHC111J100TT, printed as minus 2000 plus or minus 750 ppm per degree C over minus 55 to plus 125 degrees C, and 420 is its dielectric constant. Across that span a 110 pF body moves by about 39.6 pF across the range, which is the figure a tuned stage sees on top of the plus or minus 5 percent window.

At 100 V the part is at the printed ceiling for the family, with a test at 250 percent of rating for 5 seconds, an insulation resistance floor of 1 x 10^11 ohm at plus 25 degrees C and qualification to MIL-STD-202 methods 104, 106, 108, 208 and 210. Its printed range runs 1.1 to 180 pF, with a dissipation factor of 0.7 percent at 1 MHz.

What 110 pF does from 30 MHz to 2.45 GHz

At 30 MHz the 110 pF body at 100 V presents 48.2 ohm, at 150 MHz 9.65 ohm, at 500 MHz 2.89 ohm, at 1 GHz 1.45 ohm and at 2.45 GHz 0.59 ohm, and against a 50 ohm line the value is already below 50 ohm at the bottom of the band, because the crossing sits at about 28.9 MHz. The sheet rates the family to 100 GHz, so the same body keeps falling in reactance well above this table until the printed resonance curve turns it back.

As a series element into 50 ohm the 110 pF value turns over at 28.9 MHz. That figure belongs to this body at 100 V in a 50 ohm system and moves with the surrounding impedance, so it is quoted with the load rather than on its own.

Nothing in this block quotes a dissipation figure in ohms or an amperage, because the catalogue prints curves for both and no ceiling. What can be computed for the 110 pF part at 100 V is the reactance column above, the drift across the temperature range and the stored energy at the rating.

Stored energy at the rating is 550 nanojoule on the 110 pF part, from one half C V squared, and the stored charge is 11.0 nanocoulomb at 100 V. On a signal line those two figures are small, which is the reason this value is bought for coupling and matching rather than for holding energy.

Sourcing the 110 pF value and the second source

On the stock side this part number is listed in the printed Quik Pick selection, which the catalogue describes as 48 hour shipment with a 100 piece cap pac minimum per value. A 110 pF order at 100 V is therefore small in pieces and quick in lead time. One Stop RF Supply, Pin to Pin Cross Reference, Date Code Management covers the sourcing side for a board that needs its other RF parts as well, and SUPERB supports radio frequency, medical, telecom, military and radar builds from component supply through assembly and test, with this series supplied through channel stock.

At 100 V and 110 pF the buying question is not only price: the case letter, the dielectric code and the date code decide what the line can accept. A replacement is compared on capacitance, tolerance, voltage, dielectric and case, in that order, because a different case changes the pad and a different dielectric changes the coefficient.

For the 110 pF value at 100 V the sourcing conversation is short once the drawing is in hand: capacitance code, tolerance letter, dielectric code, case letter and termination, then the pac quantity. Everything after that is date code, packing and freight, and those are quoted rather than assumed.