Contact Us

116RL820M100TT KYOCERA AVX RF Capacitor

Brand: ATC
The 116RL820M100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

116RL820M100TT — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 116RL820M100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number116RL820M100TT
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number116RL820M100TT
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 116RL820M100TT from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 116RL820M100TT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

116RL820M100TT: 82.0 pF single layer capacitor at 100 V

Six fields sit inside 116RL820M100TT and each one changes what arrives. Case R sets the outline at 0.015 inch (0.381 mm), dielectric L sets the coefficient, 820 carries two significant digits and a count of zeros, which reads 82.0 pF, tolerance M gives plus or minus 20 percent, and the 100 V field with TT termination closes the string. The whole part is described before any paperwork is opened.

Series and outline116 Series Microcap, single layer, case R at 0.015 inch (0.381 mm)
DielectricL, dielectric constant 16000
Capacitance82.0 pF, code 820
ToleranceM, plus or minus 20 percent, a window of 65.6 to 98.4 pF
Rated voltage100 VDC, three digit voltage field
TerminationTT, titanium tungsten with nickel and gold, over 100 micro inch gold
Body thickness0.0045 to 0.012 inch (0.114 to 0.305 mm)
Dielectric capacitance rangeprinted per dielectric on the dielectric page
Operating frequencyprinted up to 100 GHz for the single layer family
Insulation resistance1 x 10^11 ohm minimum at plus 25 degrees C at rated voltage
Dielectric test250 percent of rated voltage for 5 seconds
Environmental limitsbuilt to meet the limits of MIL-C-49464
Test methodsMIL-STD-202 methods 104, 106, 108, 208 and 210
Life test conditionplus 125 degrees C at twice rated voltage
Series resonanceprinted as a typical curve only, with no numeric table
Bond strengthMIL-STD-883 method 2019 die shear
Wire bondabilityMIL-STD-883 method 2011 and MIL-C-49464 paragraph 3.12
RoHScompliant, as for every product in this catalogue
Reactance at 1 GHz1.94 ohm nominal
Stored energy at 100 V410 nanojoule

Because the value is small, the letter matters more than the number: 82.0 pF with tolerance M accepts 65.6 to 98.4 pF and nothing outside it. A part ordered at 100 V with a different letter is the same body, the same pad and a different circuit.

Look at 116RL820M100TT as a sequence of gates rather than a name. 116 opens the single layer family, case R fixes the outline at 0.015 inch (0.381 mm), dielectric L fixes the material, 820 carries two significant digits and a count of zeros, which reads 82.0 pF carries the value, and the trailing fields close it at plus or minus 20 percent tolerance, 100 V and TT termination. Every gate can be checked against the drawing, which is why the number is quoted in full on a purchase order.

Case R body, TT termination and assembly

At 82.0 pF and 100 V the body is a R outline, 0.015 inch (0.381 mm) square, and between 0.0045 and 0.012 inch thick. That is a single layer chip with two termination bands and no molding, placed like any small chip and bonded where the assembly calls for a wire.

TT is the standard finish and reads titanium tungsten with nickel and gold: over 100 micro inch of gold over 1500 to 2000 angstrom of nickel over 500 angstrom of titanium tungsten. That stack is what makes the part wire bondable as well as solderable, and the sheet holds the terminations to MIL-STD-883 method 2019 for die shear and method 2011 for wire bondability.

Dielectric L and the 100 V rating

L is a high K material at constant 16000, the part of the range where a small body carries a large value. The coefficient is printed as a band, so the 82.0 pF part at 100 V is placed for its value and its outline, and the M window is the part of the specification that is held tight.

Dielectric L is a high K material with a dielectric constant of 16000. It sits at the high end of the family, where the sheet prints the coefficient as a broad band rather than a tight figure, so a 82.0 pF part at 100 V is chosen for value per outline and checked against the printed curve before a tight tolerance is asked for.

Voltage on this part is a 100 VDC field, and the family is rated up to 100 WVDC. The sheet also prints the dielectric test at 250 percent of rating for 5 seconds and the insulation resistance floor of 1 x 10^11 ohm at plus 25 degrees C. The catalogue prints the capacitance range and the dissipation factor for this dielectric on its own page rather than in this block.

What 82.0 pF does from 30 MHz to 2.45 GHz

On a 82.0 pF value at 100 V the reactance column reads 64.7 ohm at 30 MHz, 12.9 ohm at 150 MHz, 3.88 ohm at 500 MHz, 1.94 ohm at 1 GHz and 0.79 ohm at 2.45 GHz, and against a 50 ohm line it reaches 50 ohm at about 38.8 MHz, inside the band. A single layer part this small is bought for the shift it adds to a node, so the column above is the first thing to read after the value.

Into a 50 ohm load the half power point of a 82.0 pF part sits at 38.8 MHz, where reactance equals load. Below that point the capacitor sets the loss in the line and above it the same body is close to a short, which on a 100 V stage is the number to quote when one position has to pass a band and block a DC feed.

For loss the sheet gives curves, not ceilings: typical Q against frequency and typical ESR against frequency, with Q printed as 11,000 at 6.4 GHz and 950 at 4.5 GHz only for the lowest constant material. A 82.0 pF body at 100 V is therefore quoted from the curve for its dielectric rather than from a single limit.

Energy is a short answer here: 410 nanojoule at 100 V with 8.20 nanocoulomb of charge. Because energy rises with the square of applied voltage, the same part run at half the rating carries a quarter of that figure.

Sourcing the 82.0 pF value and the second source

For 116RL820M100TT at 100 V the order needs the capacitance code, the tolerance letter, the dielectric code, the case letter and the termination, plus a pac quantity. One Stop RF Supply, Kitting Service, Date Code Management carries the sourcing side, and a replacement is checked on those fields before date code and lot records are compared. SUPERB works as a sourcing and assembly partner for RF, medical, telecom, military and radar programmes, so the discussion starts from the bill of materials and the schedule.

A 82.0 pF part at 100 V is a line item before it is a component, so the order carries the pac quantity, the date code and the incoming check together with the number. Where the value has to be replaced, the second source is matched on capacitance, tolerance, voltage, dielectric and case, and only then on the certificate.

On a 82.0 pF part at 100 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The fields to compare are capacitance, tolerance, voltage, dielectric and case, and the coefficient is confirmed at the same time.