116RG470M100TT KYOCERA AVX RF Capacitor
Product Specifications
PRODUCT SPECIFICATIONS
116RG470M100TT — KYOCERA AVX RF/Microwave Capacitor
Product Overview
The 116RG470M100TT is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
Technical Specifications
| Part Number | 116RG470M100TT |
| Manufacturer | KYOCERA AVX |
| Frequency Range | GHz / Microwave (Series Dependent) |
| Q Factor | High Q (Series Dependent) |
| RF Suitable | YES |
| High Q | YES |
| Low Loss | YES |
| Tolerance | Refer to datasheet |
| Package / Case Style | Refer to datasheet |
| Dielectric Material | Refer to datasheet |
| Temperature Coefficient | Refer to datasheet |
| Operating Temperature Range | Refer to datasheet |
| Termination Finish | Refer to datasheet |
| Mounting Type | Surface Mount (SMD/SMT) |
| RoHS Compliance | RoHS Compliant |
| REACH Compliance | REACH Compliant |
| Country of Origin | United States |
| Manufacturer Part Number | 116RG470M100TT |
| Data Confidence | Series Based |
| Verification Note | Requires ATC datasheet confirmation |
Key Features
- High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
- Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
- RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
- Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
- Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.
Applications
- RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
- Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
- Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
- Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
- Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.
Compatible and Alternative Part Numbers
- Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
- Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
- Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)
About KYOCERA AVX
KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.
About Superb Automation — Trusted KYOCERA AVX Supplier
Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.
Why Source 116RG470M100TT from Superb Automation?
- Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
- Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
- Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
- Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
- One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
- Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
- Global Logistics — International shipping with full export documentation.
Ordering Information
To order 116RG470M100TT or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com
116RG470M100TT: 47.0 pF single layer capacitor at 100 V
Six fields sit inside 116RG470M100TT and each one changes what arrives. Case R sets the outline at 0.015 inch (0.381 mm), dielectric G sets the coefficient, 470 carries two significant digits and a count of zeros, which reads 47.0 pF, tolerance M gives plus or minus 20 percent, and the 100 V field with TT termination closes the string. The whole part is described before any paperwork is opened.
| Series and outline | 116 Series Microcap, single layer, case R at 0.015 inch (0.381 mm) |
| Dielectric | G, dielectric constant 6000 |
| Capacitance | 47.0 pF, code 470 |
| Tolerance | M, plus or minus 20 percent, a window of 37.6 to 56.4 pF |
| Rated voltage | 100 VDC, three digit voltage field |
| Termination | TT, titanium tungsten with nickel and gold, over 100 micro inch gold |
| Body thickness | 0.0045 to 0.012 inch (0.114 to 0.305 mm) |
| Dielectric capacitance range | printed per dielectric on the dielectric page |
| Operating frequency | printed up to 100 GHz for the single layer family |
| Insulation resistance | 1 x 10^11 ohm minimum at plus 25 degrees C at rated voltage |
| Dielectric test | 250 percent of rated voltage for 5 seconds |
| Environmental limits | built to meet the limits of MIL-C-49464 |
| Test methods | MIL-STD-202 methods 104, 106, 108, 208 and 210 |
| Life test condition | plus 125 degrees C at twice rated voltage |
| Series resonance | printed as a typical curve only, with no numeric table |
| Bond strength | MIL-STD-883 method 2019 die shear |
| Wire bondability | MIL-STD-883 method 2011 and MIL-C-49464 paragraph 3.12 |
| RoHS | compliant, as for every product in this catalogue |
| Reactance at 1 GHz | 3.39 ohm nominal |
| Stored energy at 100 V | 235 nanojoule |
Because the value is small, the letter matters more than the number: 47.0 pF with tolerance M accepts 37.6 to 56.4 pF and nothing outside it. A part ordered at 100 V with a different letter is the same body, the same pad and a different circuit.
Look at 116RG470M100TT as a sequence of gates rather than a name. 116 opens the single layer family, case R fixes the outline at 0.015 inch (0.381 mm), dielectric G fixes the material, 470 carries two significant digits and a count of zeros, which reads 47.0 pF carries the value, and the trailing fields close it at plus or minus 20 percent tolerance, 100 V and TT termination. Every gate can be checked against the drawing, which is why the number is quoted in full on a purchase order.
Case R body, TT termination and assembly
At 47.0 pF and 100 V the body is a R outline, 0.015 inch (0.381 mm) square, and between 0.0045 and 0.012 inch thick. That is a single layer chip with two termination bands and no molding, placed like any small chip and bonded where the assembly calls for a wire.
TT is the standard finish and reads titanium tungsten with nickel and gold: over 100 micro inch of gold over 1500 to 2000 angstrom of nickel over 500 angstrom of titanium tungsten. That stack is what makes the part wire bondable as well as solderable, and the sheet holds the terminations to MIL-STD-883 method 2019 for die shear and method 2011 for wire bondability.
Dielectric G and the 100 V rating
G is a high K material at constant 6000, the part of the range where a small body carries a large value. The coefficient is printed as a band, so the 47.0 pF part at 100 V is placed for its value and its outline, and the M window is the part of the specification that is held tight.
Dielectric G is a high K material with a dielectric constant of 6000. It sits at the high end of the family, where the sheet prints the coefficient as a broad band rather than a tight figure, so a 47.0 pF part at 100 V is chosen for value per outline and checked against the printed curve before a tight tolerance is asked for.
Voltage on this part is a 100 VDC field, and the family is rated up to 100 WVDC. The sheet also prints the dielectric test at 250 percent of rating for 5 seconds and the insulation resistance floor of 1 x 10^11 ohm at plus 25 degrees C. The catalogue prints the capacitance range and the dissipation factor for this dielectric on its own page rather than in this block.
What 47.0 pF does from 30 MHz to 2.45 GHz
On a 47.0 pF value at 100 V the reactance column reads 112.9 ohm at 30 MHz, 22.6 ohm at 150 MHz, 6.77 ohm at 500 MHz, 3.39 ohm at 1 GHz and 1.38 ohm at 2.45 GHz, and against a 50 ohm line it reaches 50 ohm at about 67.7 MHz, inside the band. A single layer part this small is bought for the shift it adds to a node, so the column above is the first thing to read after the value.
Into a 50 ohm load the half power point of a 47.0 pF part sits at 67.7 MHz, where reactance equals load. Below that point the capacitor sets the loss in the line and above it the same body is close to a short, which on a 100 V stage is the number to quote when one position has to pass a band and block a DC feed.
For loss the sheet gives curves, not ceilings: typical Q against frequency and typical ESR against frequency, with Q printed as 11,000 at 6.4 GHz and 950 at 4.5 GHz only for the lowest constant material. A 47.0 pF body at 100 V is therefore quoted from the curve for its dielectric rather than from a single limit.
Energy is a short answer here: 235 nanojoule at 100 V with 4.70 nanocoulomb of charge. Because energy rises with the square of applied voltage, the same part run at half the rating carries a quarter of that figure.
Sourcing the 47.0 pF value and the second source
For 116RG470M100TT at 100 V the order needs the capacitance code, the tolerance letter, the dielectric code, the case letter and the termination, plus a pac quantity. One Stop RF Supply, Kitting Service, Date Code Management carries the sourcing side, and a replacement is checked on those fields before date code and lot records are compared. SUPERB works as a sourcing and assembly partner for RF, medical, telecom, military and radar programmes, so the discussion starts from the bill of materials and the schedule.
A 47.0 pF part at 100 V is a line item before it is a component, so the order carries the pac quantity, the date code and the incoming check together with the number. Where the value has to be replaced, the second source is matched on capacitance, tolerance, voltage, dielectric and case, and only then on the certificate.
On a 47.0 pF part at 100 V the practical sourcing risk is substitution, not availability: a part with the same capacitance and a wider window fits the pad and fails the stage. The fields to compare are capacitance, tolerance, voltage, dielectric and case, and the coefficient is confirmed at the same time.