Contact Us

100C2R1CW2500X KYOCERA AVX RF Capacitor

Brand: ATC
The 100C2R1CW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.
quote now

Product Specifications

PRODUCT SPECIFICATIONS

100C2R1CW2500X — KYOCERA AVX RF/Microwave Capacitor

Product Overview

The 100C2R1CW2500X is a RF/microwave ceramic capacitor manufactured by KYOCERA AVX., with high-Q, low-loss performance characteristics. Designed for ghz / microwave (series dependent) applications — suitable for rf matching / microwave / communication.

Technical Specifications

Part Number100C2R1CW2500X
ManufacturerKYOCERA AVX
Frequency RangeGHz / Microwave (Series Dependent)
Q FactorHigh Q (Series Dependent)
RF SuitableYES
High QYES
Low LossYES
ToleranceRefer to datasheet
Package / Case StyleRefer to datasheet
Dielectric MaterialRefer to datasheet
Temperature CoefficientRefer to datasheet
Operating Temperature RangeRefer to datasheet
Termination FinishRefer to datasheet
Mounting TypeSurface Mount (SMD/SMT)
RoHS ComplianceRoHS Compliant
REACH ComplianceREACH Compliant
Country of OriginUnited States
Manufacturer Part Number100C2R1CW2500X
Data ConfidenceSeries Based
Verification NoteRequires ATC datasheet confirmation

Key Features

  • High Q Factor — Excellent quality factor for low-loss RF performance at operating frequency.
  • Low ESR — Low Equivalent Series Resistance ensures minimal signal attenuation in RF paths.
  • RF/Microwave Optimized — Designed for ghz / microwave (series dependent) frequency range with stable capacitance and high self-resonant frequency.
  • Surface Mount Package — Compatible with standard SMT reflow soldering and automated PCB assembly.
  • Rugged Construction — KYOCERA AVX capacitors manufactured in certified facilities with consistent batch performance.

Applications

  • RF Matching — Impedance matching networks for RF power amplifiers in base stations, small cells, and repeaters.
  • Microwave — Microwave circuit applications including couplers, filters, and resonant structures.
  • Communication — Telecom equipment — 5G NR base stations, microwave backhaul, satellite communication systems.
  • Medical — Medical electronics — MRI systems, RF ablation equipment, medical telemetry devices.
  • Aerospace — Aerospace and defense — radar systems, electronic warfare, avionics, satellite payloads.

Compatible and Alternative Part Numbers

  • Equivalent Manufacturers: Passive Plus, Presidio Components, Johanson Technology, Knowles/Dielectric Labs, Murata, TDK
  • Same Series Alternatives: Other capacitance, voltage, tolerance, and package variants within the KYOCERA AVX product family
  • Cross-Reference Guidance: When substituting, verify capacitance value, voltage rating, tolerance, package dimensions, dielectric type, and RF performance (Q factor, ESR, SRF)

About KYOCERA AVX

KYOCERA AVX capacitors are manufactured in ISO 9001 certified facilities and widely specified in reference designs from Analog Devices, Texas Instruments, MACOM, Qorvo, Broadcom, and other leading RF semiconductor manufacturers. Key applications include 5G NR base stations, satellite communication, military radar, MRI medical imaging, and automotive radar systems.

About Superb Automation — Trusted KYOCERA AVX Supplier

Superb Automation is a trusted electronic components supplier. We provide 100% genuine KYOCERA AVX capacitors with full warranty, lot traceability, and competitive pricing. Our service includes component sourcing, PCB manufacturing, PCBA assembly, and global logistics with engineering support.

Why Source 100C2R1CW2500X from Superb Automation?

  1. Trusted Supplier — 100% genuine, factory-original KYOCERA AVX products with full warranty and lot traceability.
  2. Competitive Pricing — Volume discounts available. Prototype and sample quantities supported.
  3. Fast Quotation — RFQs processed within hours. In-stock items ship same/next business day.
  4. Engineering Support — FAE team assists with capacitor selection, S-parameter simulation, and cross-reference.
  5. One-Stop Solution — Capacitors + PCB + PCBA assembly from a single supplier.
  6. Quality Assurance — ESD-protected handling, visual inspection, electrical verification before shipment.
  7. Global Logistics — International shipping with full export documentation.

Ordering Information

To order 100C2R1CW2500X or any KYOCERA AVX capacitor, contact us with: Part Number, Quantity, Target Price, Delivery Destination, Required Date. Contact: Info@superb-tech.com | www.superb-tech.com

100C2R1CW2500X: 2.1 pF at 2500 V in the case C body

Nothing in the order code is decoration. The first three characters name the series and the case, 100 for the porcelain Superchip series and C for the case. Then come 2R1 for the capacitance, C for plus or minus 0.25 pF, W for the termination, 2500 for the working voltage and X for laser marking, with the packing left to the mechanical configuration table. A value in another case is another order code, and the case is what sets the current the body can pass before anything else changes.

Inside the 5.84 mm by 6.35 mm C case sits a porcelain multilayer stack, the construction that gives this series its current and voltage capability in a body this size. The drawing carries plus 0.51 or minus 0.25 mm on the 5.84 mm side and plus or minus 0.38 mm on the 6.35 mm side, which is what a land pattern has to allow for. Q is not a single number here: the data sheet plots it against capacitance at 30, 150, 500 and 1000 MHz, so a 1 pF member and a 2400 pF member sit on two different parts of the same curve. The W termination is tin and lead solder over a nickel barrier, a lead bearing finish, and the marking is laser rather than ink.

Series and case100C, case C, 5.84 mm by 6.35 mm, the .250 inch square body
Capacitance2.1 pF, code 2R1
ToleranceC, plus or minus 0.25 pF, a window of 0.25 pF around the marked value
Working voltage2500 VDC, 1768 V RMS at 0.707 times the DC rating
Withstanding voltage3000 V for five seconds, 120 percent of the working voltage
Life test2500 V for 2000 hours at 125 degrees C, 100 percent of the working voltage
Temperature coefficient+90 plus or minus 30 ppm per degree C from minus 55 to plus 125 degrees C
Operating rangeminus 55 to plus 125 degrees C with no derating of the working voltage
Insulation resistance10^5 Mohm minimum at 25 degrees C and 10^4 Mohm minimum at 125 degrees C, measured at a maximum of 500 VDC whatever the rating
Leakage floor25.0 nA at 2500 V at 25 degrees C and 250 nA at 125 degrees C, from the resistance floors
Stored energy6.56 microjoule at the working voltage, from one half C V squared
Reactance at 500 MHz152 ohm nominal
Series resonanceplotted against capacitance for the series; the part is inductive above it
Quality factorESR and Q curves at 30, 150, 500 and 1000 MHz
TerminationW, tin and lead solder plated over a nickel barrier, a lead bearing finish
Marking and packinglaser marking; no packaging letter on this code, so the packing is read from the mechanical configuration table, tape and reel or a tray of 180 pieces
Terminal strength10 lbs minimum, 20 lbs typical, for five seconds, MIL-STD-202 method 211
Environmental schedulethermal shock method 107 condition A, moisture resistance method 106, low voltage humidity method 103 at 1.5 VDC, 85 degrees C and 85 percent relative humidity for 240 hours
Stabilityaging effects none, piezoelectric effects none, retrace and capacitance drift both under 0.02 percent or 0.02 pF, whichever is greater
Current rating basisa 65 degrees C mounting surface with 15 degrees C per watt of thermal resistance, so 4 W of dissipation brings the case to 125 degrees C

What 2.1 pF does from 30 MHz to 1 GHz

At 30 MHz this 2.1 pF body presents 2526.3 ohm, at 150 MHz 505.3 ohm, at 500 MHz 151.6 ohm and at 1 GHz 75.8 ohm. A body this small never becomes a short in the band, which is the whole point: 151.6 ohm at 500 MHz and 75.8 ohm at 1 GHz are impedances a match can be tuned with, not a return path. The circuit consequence is that the value, not the case, sets the behaviour, and the case is chosen for the current and voltage the stage puts through it.

Tolerance is easier to judge in reactance than in picofarads. At 500 MHz this 2.1 pF body presents 151.6 ohm. The C window of 0.25 pF moves that to 135.5 ohm at 2.35 pF and to 172.1 ohm at 1.85 pF, a spread of 36.6 ohm, which is 24.15 percent of the nominal reactance. Against a 50 ohm line the larger of those readings is 3.4 times the line impedance, so the window owns the whole match and the C code has to be held on a tuned stage.

One number that does not appear on the label is the current the body will carry, and the data sheet gives it as a chart at 150 MHz and at 500 MHz against capacitance rather than as a single rating. The chart is drawn on the 65 degrees C mounting surface with 15 degrees C per watt, so 4 W of dissipation brings the case to 125 degrees C. A 2.1 pF member sits at one point on that chart and the point moves with frequency, which is why the same case size carries very different currents at 150 MHz and at 500 MHz.

Where a 2.1 pF case C part is chosen

Small values in this case size appear in plasma chambers, medical MRI coils and VHF and UHF power amplifiers, the three circuit applications the data sheet names, and in each of them the part is doing impedance work rather than bypass. On an MRI coil the value sets the resonance of a local element, so a 0.25 pF shift is a shift in the tuning of the coil rather than a small change in a filter skirt. On a plasma chamber match the same body is a series element in a network that has to hold at high voltage, which is why the 2500 V rating and the 120 percent withstanding test matter as much as the tolerance.

At 2500 V the part sits above the 1250 V break, the point where the series moves to its smallest test multiples. Five seconds at 3000 V is the withstanding test, 120 percent, and the life test at 125 degrees C runs 2000 hours at 100 percent, 2500 V. Both multiples are lower than a 500 V part carries, and that is the rule stepping down rather than a weaker body: the part at 2500 V is a higher voltage component, not a lower grade of the same one. At the rating this part leaks 25.0 nA at 25 degrees C and 250 nA at 125 degrees C, so on a 1 Mohm node that floor alone is 250 mV of offset at the higher temperature, and the bias network has to be able to absorb it.

Questions that arrive with a shortage quote

Can the C code be swapped for another grade on a shortage? Below 10 pF the table offers three absolute codes and nothing else, B at 0.1 pF, C at 0.25 pF and D at 0.5 pF, so a shortage cannot be eased into a percentage grade that the value does not carry. At 2.1 pF the C window is 0.25 pF, which is 11.9 percent of the marked value, and at 500 MHz it takes the reactance from 152 ohm at 2.1 pF to 135 ohm at 2.35 pF, 16.1 ohm of movement that the circuit either absorbs or does not. A bypass or a blocking position absorbs it; a match does not. We quote the code on the order and we state on the quotation the code we can actually ship, so the two never get mixed on the line.

How is the withstanding test set at 2500 V? The series rule steps down with voltage: 250 percent up to 500 V, 150 percent up to 1250 V, and 120 percent above that. At 2500 V the test is 3000 V for five seconds, and the life test applies 100 percent of the working voltage for 2000 hours at 125 degrees C, which is 2500 V. A 2500 V or 1500 V part therefore carries a smaller test multiple, not a weaker body, and the number to work against in a circuit is the working voltage rather than the test level.

What has to be on the certificate? Three things that a broker line often leaves off: the date code and the lot, the measured capacitance at 1 MHz with the test fixture stated, and the finish, because the tin and lead option is lead bearing and a restricted build cannot take it without a deviation. A 2.1 pF part at 2500 V also has to carry its sorting code on the paperwork, since the value alone does not tell the line which window arrived. This code has no packing letter, so the tray or reel decision has to be written on the order, and the count on the label has to match the count on the reel.

What to send with an enquiry

A quotation for this part needs four things from the buyer: quantity, target date, the complete order code including the tolerance and finish letters, and the packing the line can accept. Send the whole string and we check it against the current revision, then confirm date codes, packing and country of origin on the quotation. The RF Procurement page sets out how the quotation is built and what is confirmed before a reel is booked, the BOM Shortage Recovery page covers the shortage route when one line item stops a build, and the Date Code Management page sets out how date codes and lot numbers are recorded and shipped.