Contact Us

ADXL359BCCZ-RL7

Brand: Analog Devices
Analog Devices ADXL359BCCZ-RL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADXL359BCCZ-RL7 — Analog & Mixed-Signal ICs | Superb Automation

ADXL359BCCZ-RL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADXL359BCCZ-RL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADXL359BCCZ-RL7: A 20 Bit Accelerometer on Either SPI or a Reduced I2C Port

What this part is

The ADXL359 is a three axis MEMS accelerometer with a 20 bit converter inside, offered in three measurement ranges of plus and minus 10 g, 20 g and 40 g. What puts it in a catalogue is the combination of an 80 microgram per root hertz noise floor with a 0.45 milligram per degree C typical offset drift, which is what lets a tilt or vibration channel hold its zero over a temperature swing without a recalibration step at the end of the line. Most parts in this class give up one of those two figures to keep the other.

Data leaves the part over SPI or over a reduced I2C port, and the multifunction pins change role depending on which bus the host uses. Two supply arrangements are allowed: 2.25 V to 3.6 V into the internal regulators, or 1.8 V applied directly to the analog and digital rails with the regulators bypassed. The body is a 14 terminal LGA of 4 mm by 4 mm by 1.04 mm, the temperature grade reaches 125 degrees C, and the part includes a temperature sensor and programmable high pass and low pass digital filters.

Published figures that matter to a buyer

Rangesplus and minus 10 g, 20 g, 40 g, selectable
Converter20 bit
Noise density80 micrograms per root hertz, all axes
Zero g offset drift0.45 milligram per degree C typical, all axes
Supply with regulators2.25 V to 3.6 V
Supply with regulators bypassed1.8 V typical, plus or minus 10 percent
Current in measurement200 microamps
Current in standby21 microamps
InterfaceSPI, plus a limited I2C port
Filtersprogrammable high pass and low pass, digital
Temperatureminus 40 to plus 125 degrees C
Body14 terminal LGA, 4 mm by 4 mm by 1.04 mm

Where the headline numbers stop

Eighty micrograms per root hertz is a density and not a measurement. Integrated over a 100 Hz band it is 0.8 mg rms, and over 1 kHz it is 2.53 mg rms. Against a count of 19.07 micrograms on the plus and minus 10 g range, the 100 Hz figure is about 42 counts of noise in a single sample, so one reading cannot resolve much below a milligram and averaging through the digital filter is what buys the resolution back.

The offset drift has to be read against the range in use. At 0.45 mg per degree C over the full 165 degree span the drift is 74.2 mg, which is 0.37 percent of the plus and minus 10 g span, and that is a typical figure rather than a maximum, so a budget built on it needs headroom. Power is modest but not free: 200 microamps at 3.3 V is 0.66 mW while measuring, and the 21 microamp standby state is 69 microwatts, which is where a battery node should sit between bursts.

Applications where it fits

  • Airborne and ground inertial measurement units where vibration is high and the zero has to stay put.
  • Platform stabilization, antenna pedestals and gimbal control.
  • Structural health monitoring and wireless condition monitoring nodes.
  • Tilt sensing on machinery, where a milligram of drift is a fraction of a degree.
  • Robotics and heading reference systems that need a temperature stable zero more than a wide range.

Two questions buyers ask

Is the ADXL355 a drop in alternative? No. The ADXL355 is the same family idea with a lower noise density of 22.5 micrograms per root hertz and ranges of plus and minus 2, 4 and 8 g, but it is a different terminal count and a different interface combination. It is a substitution only with a board change, so a shortage plan has to carry the two as separate lines rather than as one line with two names.

Does a 20 bit converter mean 20 usable bits? It means the result register is 20 bits wide. What is usable is set by the noise floor: at 100 Hz of bandwidth the noise alone is 42 counts, so the effective resolution is nearer 15 bits in that band and rises as the digital low pass filter narrows the band. A specification that quotes 20 bits without naming the bandwidth is quoting the register, not the measurement.

Sourcing notes and next step

ADXL359BCCZ-RL7 is the tape and reel packing of the 14 terminal LGA body. A cross reference has to state the range set, the interface and the temperature grade together, because the family carries order codes that look alike on a bill of materials and differ on all three. The analog and mixed signal IC family page lists the sensor line, the medical device components page covers the traceability an instrument build needs, and the lead time page sets out what to do when this order code is quoted long.

Request Quote — In Stock, 100% New & Original, Full Warranty