Contact Us

AD9175BBPZ

Brand: Analog Devices
Analog Devices AD9175BBPZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD9175BBPZ — Analog & Mixed-Signal ICs | Superb Automation

AD9175BBPZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD9175BBPZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD9175BBPZ: 11 bit at 3.08 GSPS, 16 bit at 1.23 GSPS, and why the two cannot be had together

The AD9175BBPZ is the 144-ball BGA_ED body of the AD9175, a dual 12.6 GSPS RF DAC whose channelizers run at 3.08 GSPS complex. The distinction that matters when a part is selected from a headline table is that the 3.08 GSPS figure is attached to 11-bit resolution, and the 16-bit resolution that the same page also quotes is attached to 1.23 GSPS per channel. A board that needs both numbers at once does not have them.

Published values

ParameterValue
Resolution11 bit in the fast channel modes, 16 bit in the slower modes
DAC update rateup to 12.6 GSPS
Complex input data rate3.08 GSPS per channel at 11 bit, 1.23 GSPS at 16 bit
Non-complex input rate3.4 GSPS
Input channels3 bypassable complex channels per RF DAC
JESD204B interface8 lanes at 15.4 Gbps, Subclass 1
Channel interpolation1, 2, 3, 4, 6 and 8
Final interpolation1, 2, 4, 6, 8 and 12
Main NCO48 bit at the DAC rate, synthesis to 6 GHz
Ultrawide modes3.4 GSPS single DAC at 11 bit, 3.4 GSPS dual at 11 bit
Two tone IMD3-83 dBc at 1.84 GHz, -7 dBFS per tone
Power2.54 W with both DACs at 12 GSPS and the PLL on
Package144-ball BGA_ED, 10 mm x 10 mm, 0.8 mm pitch

Resolution against bandwidth, in numbers

A complex stream at 3.08 GSPS in 11-bit form is 3.08 x 2 x 11, or 67.8 Gbps, before packing overhead. The same link carrying 16-bit complex data is published at 1.23 GSPS per channel, which is 39.4 Gbps at the same arithmetic. The link is not the limit in either case, the channelizer's own arithmetic is, so the choice is made by the signal and not by the SERDES.

The way to read this as a buyer is to write down the occupied bandwidth first. A 400 MHz wide carrier needs about 200 MHz of complex bandwidth, comfortably inside the 16-bit rate. A 1.5 GHz wide signal at the same resolution does not fit, and at that point the question is whether 11 bit is enough for the modulation, which is a system error vector magnitude decision and not a converter decision.

Where 11 bit is the right answer

Modern wideband radar and electronic warfare chains often carry signals whose dynamic range is set by the analogue front end rather than by the converter, and 11 bit of a 12.6 GSPS core still gives more than 60 dB of theoretical signal to noise in a narrow analysis band after processing gain. In those chains the extra sample rate buys resolution in range and the 11-bit word costs nothing that the front end was going to deliver anyway.

The same reasoning applies to a test instrument that sweeps a wide band and averages: the averaging reduces the quantisation noise, so the wideband mode is used for capture and the narrow mode for the final measurement. Both modes exist on the one order code.

Reading the family across three order codes

The AD9174, AD9175 and AD9176 share the 12.6 GSPS core, the 3.08 GSPS channelizer clock and the 10 mm x 10 mm BGA_ED body. The AD9174 page leads with the direct digital synthesizer and the 31 NCO bank, the AD9176 page leads with wideband channelizers at 3.08 GSPS complex in 16 bit, and this page leads with the 11-bit fast mode. The AD9172 is the earlier member with a 1.54 GSPS complex input and a 15 Gbps JESD204B port.

Because the three share a footprint, a board can be laid out once and populated with whichever member the programme can obtain. That is worth checking before a board revision is considered: the supply rails, the clock input and the JESD lanes are the same, and the differences are in the register map and the maximum rates.

Power and the pin compatible alternative

2.54 W with both DACs at 12 GSPS and the PLL on is the same figure as the AD9174 and AD9176, which is expected from a shared core. The 2.55 W quoted on the AD9172 page at the same update rate is close enough that the choice between the members is never a thermal one.

The supply set is the usual split of a 1.0 V core, a 1.8 V interface and a 3.3 V or 5 V analogue rail, so a change of member does not change the power tree. What does change is the register sequence for the channelizers, and that is where a firmware port costs more than the part.

For a board that has to keep running while a reel runs out, the ADC and DAC cross reference is where the family alternatives sit, the ADI second source page is the check list before a substitute goes in, and the pin to pin cross reference is how a gap is covered without a new line item.

Two questions buyers ask

Does the AD9175BBPZ give 16 bit at 3.08 GSPS? No. The 3.08 GSPS complex input rate is published at 11 bit, and the 16-bit rate in the same mode is 1.23 GSPS per channel. The ultrawide mode reaches 3.4 GSPS at 11 bit as a single or dual DAC.

Is this the same part as the AD9176 in a different speed grade? They share the core, the channelizer clock and the package, but the published rates differ: the AD9176 carries 3.08 GSPS complex in 16 bit and this part carries it in 11 bit. The AD9176 page is the one to read when 16 bit at the full channelizer rate is the requirement.