Contact Us

AD8646ARMZ-REEL

Brand: Analog Devices
Analog Devices AD8646ARMZ-REEL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8646ARMZ-REEL — Analog & Mixed-Signal ICs | Superb Automation

AD8646ARMZ-REEL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8646ARMZ-REEL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD8646ARMZ-REEL: a dual 24 MHz rail to rail amplifier with 120 milliamps of output current

What this order code is

AD8646ARMZ-REEL is the dual member of the AD8646, AD8647 and AD8648 family of rail to rail input and output CMOS amplifiers. It has 24 MHz of bandwidth, 11 V per microsecond of slew rate, 2.5 millivolts maximum offset, 8 nanovolts per root hertz of noise and 1 picoamp of input bias current, and it runs from 2.7 V to 5.5 V. The output stage delivers 120 milliamps of short circuit current, which is what makes the part usable as a line driver rather than only as a front end. ARMZ is the 8-lead MSOP body and REEL is the reel.

The AD8647 in the same family adds a low power shutdown function and the AD8648 is the quad. The AD8646 and AD8648 are available in automotive qualified versions, which is stated in the ordering guide rather than implied by the family name. Supply current is 2 milliamps maximum per amplifier, and the part is unity gain stable with no phase reversal on overdrive.

Parameters as published

ItemValue
Offset voltage2.5 millivolts maximum
Supply range2.7 V to 5.5 V
Gain bandwidth24 MHz
Slew rate11 V per microsecond
Voltage noise8 nanovolts per root hertz
Input bias current1 picoamp
Short circuit output current120 mA
Supply current2 milliamps maximum per amplifier
Input and output rangerail to rail
Stabilityunity gain stable, no phase reversal
AutomotiveAD8646 and AD8648 available qualified
Package8-lead MSOP

Numbers that decide the application

The 24 MHz product holds up at gain: 2.4 MHz at a gain of 10 and 240 kHz at a gain of 100, so the part is a wideband stage rather than a fast buffer only. The slew rate sets a separate limit of 700 kHz at a 5 V peak to peak output, which is well above what a 5 V amplifier can deliver at 24 MHz anyway, so on this part the bandwidth is the binding constraint and the slew rate is not.

Offset of 2.5 millivolts is 32.8 counts of a 16 bit converter on 5 V, so the part is an ac amplifier and not a precision dc one. Noise of 8 nanovolts over a 100 kHz band is 2.53 microvolts rms, 0.033 of a 16 bit count, and bias current of 1 picoamp across a 10 megohm source is 10 microvolts, both below the offset and both consistent with a part that is bought for speed and drive rather than for dc accuracy.

The 120 milliamps of short circuit current is a drive rating and not a continuous one: into 50 ohms it would need 6 V, which a 5 V rail cannot supply, so the output clips and the current limit is what protects the part. Into a 600 ohm load the full rail to rail swing is 8 milliamps, which is a comfortable operating point. Supply current of 2 milliamps maximum per amplifier means the dual draws 4 milliamps and 35 Ah across a year, so this is a mains or a line powered part rather than a battery one.

Selection and cross reference notes

The first comparison is bandwidth against supply current: 24 MHz at 2 milliamps per amplifier is a different point on the trade curve from 8 MHz at 750 microamps, and a board that does not need the bandwidth is paying for it in current. The second is the output drive, because a part with the same bandwidth and a 20 milliamp output cannot drive the same load.

Within the family, the AD8647 adds shutdown and the AD8648 adds two more channels. The shutdown function is worth having when the amplifier is in a signal chain that is powered down for most of the time, and it changes the pinout, so it is not a firmware option. Automotive qualified codes are separate strings and the qualification does not carry to every member.

Where it fits

Battery powered instruments, multipole filters, converter front ends, sensors, bar code scanners, ASIC input and output amplifiers, audio amplifiers, photodiode amplifiers and datapath switch control are the applications named on the product page. The combination of 1 picoamp bias and 24 MHz is unusual and suits a photodiode or a high impedance sensor that also needs speed. Buyers who need the family view can start at the analog and mixed signal category page, and teams comparing this against a lower power amplifier usually work from the amplifier cross reference page.

Buying notes

ARMZ is the 8-lead MSOP body and REEL is the reel; the SOIC body, the shutdown version and the quad all carry different codes. Because the automotive qualification applies to specific order codes only, a line that needs it has to state the full string rather than the family name. Date code and reel size are the fields that vary between sellers.

Sourcing notes and next step

The questions that come back are the load the amplifier has to drive, the bandwidth at the real gain and whether the automotive qualification is required. We quote the AD8646 codes against a bill of materials and confirm the body and qualification against the line. Send the codes, quantities and required date through the BOM shortage recovery page and we will answer with availability and the cross reference where the exact body is short.

Request Quote — In Stock, 100% New & Original, Full Warranty