Contact Us

AD8236ARMZ

Brand: Analog Devices
Analog Devices AD8236ARMZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8236ARMZ — Analog & Mixed-Signal ICs | Superb Automation

AD8236ARMZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8236ARMZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD8236ARMZ: 40 Microamp Instrumentation Amplifier with No Crossover Distortion

The AD8236ARMZ draws 40 microamps maximum, which is two orders of magnitude below a conventional instrumentation amplifier, and it does it without the input crossover distortion that usually comes with a rail-to-rail input stage. Input bias current is 1 pA and offset current 0.5 pA, common-mode rejection is 110 dB at a gain of 100, gain is set with one resistor through 5 plus 420 kohm divided by RG, the supply is 1.8 V to 5.5 V, and the input and output both swing to the rails. It comes in an 8-lead MSOP and is aimed at medical instruments and portable devices where a coin cell has to last a year.

Published values

ParameterValue
Supply current40 microamps maximum
Input bias current1 pA
Input offset current0.5 pA
Gain5 and up, G = 5 + 420 kohm divided by RG
Common-mode rejection110 dB at gain of 100
Supply range1.8 V to 5.5 V
Input rangeRail to rail
OutputRail to rail
Crossover distortionNone, single input pair across the full common-mode range
Package8-lead MSOP

The crossover problem this part avoids

A rail-to-rail input stage is normally built from two differential pairs, one for the low common-mode range and one for the high, with a switch between them. As the common-mode voltage crosses the handover point the offset jumps, typically by a few hundred microvolts, and in a closed-loop system that appears as a step in the output whenever the signal crosses that level. For a slowly moving signal, such as an electrode potential or a battery voltage, the step lands in the middle of the measurement and looks like a real event. The AD8236 keeps a single input pair and shifts the internal levels instead, so the offset stays continuous. That is worth more than the supply current in an ECG front end.

Forty microamps in the context of a battery

At 3 V and 40 microamps the part draws 120 microwatts. A 200 mAh coin cell has about 600 mWh, so the amplifier alone would run for 5,000 hours, which is over half a year of continuous operation. In practice the cell is shared with a converter, a radio and a microcontroller, so the amplifier is a small fraction of the budget and the reason to choose it is the picoamp input, not the current. Where the current does matter is a 4 to 20 mA loop powered instrument: the whole circuit has 4 mA to work with, and 40 microamps leaves almost all of it for the rest.

Gain from five, and the resistor that sets it

Gain is 5 plus 420 kohm divided by RG, so a gain of 100 needs 4.42 kohm and a gain of 1000 needs 422 ohm. The larger internal resistor than the 49.4 kohm family means the external resistor is larger for the same gain, which reduces the error from the switch resistance if a multiplexer is used to change gain, and increases the thermal noise the resistor contributes. At a gain of 100 the resistor contributes about 8.4 nV per root hertz, comparable to the amplifier's own noise, so a low value is preferable where the gain is fixed. Fit a 0.1 percent part if the gain has to be accurate.

Availability and second sourcing

A 40 microamp instrumentation amplifier with a picoamp input and no crossover distortion is a narrow category, so substitution usually means a different architecture and a re-check of the offset behaviour across the common-mode range, not just the pinout. The amplifier cross reference page groups the micropower instrumentation amplifiers, the medical device components page covers the front end requirements this part is chosen for, and the lead time page shows what is available.