UCC5390ECQDWVQ1
Product Specifications
UCC5390ECQDWVQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The UCC5390ECQDWVQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
UCC5390ECQDWVQ1: a 10 A isolated gate driver for SiC and IGBT, and the row that is now obsolete
The UCC5390-Q1 is a single channel isolated gate driver with 10 A source and 10 A sink peak current, aimed at silicon carbide MOSFETs and IGBTs in automotive on board chargers and traction inverters. The isolation is capacitive through silicon dioxide, rated 5 kVRMS for one minute per UL 1577 and 7000 VPK per the VDE standard on the DWV body, with an 8.5 mm creepage distance and a common mode transient immunity of 100 V per nanosecond minimum. Propagation delay is 60 ns typical with a small part to part skew, which is what keeps parallel devices from fighting in a fast inverter.
The supply arrangement is split: the input side runs from 3 V to 15 V, and the driver side runs up to 33 V, with the output side undervoltage lockout referenced to the driver ground so a bipolar gate supply can be built around it. The input pins tolerate minus 5 V, and the operating junction range reaches 150 C. The driver is AEC-Q100 qualified at temperature grade 1 with HBM level H2 and CDM level C6, and functional safety documentation is available for a system built to ASIL requirements.
Key electrical data for the UCC5390ECQDWVQ1
| Drive | 10 A minimum peak source and sink current, 4 A typical Miller clamp behaviour described in the family |
| Isolation | 5 kVRMS for one minute, 7000 VPK on the DWV body, 8.5 mm creepage and clearance |
| Supplies | Input side 3 V to 15 V, driver side up to 33 V, output side UVLO at 12 V referenced to the driver ground |
| Timing | 60 ns typical propagation delay, 100 V per nanosecond minimum common mode transient immunity |
| Inputs | CMOS inputs with minus 5 V handling, input side undervoltage lockout logic in the device |
| Temperature | Junction minus 40 C to 150 C, AEC-Q100 grade 1 |
Package, marking and reel data
| Body | DWV, SOIC 8 pin wide body, 7.50 mm by 5.85 mm, 8.5 mm creepage |
| Status | The exact string UCC5390ECQDWVQ1 prints obsolete in the vendor addendum |
| Active row | UCC5390ECQDWVRQ1 prints active at 1000 pieces on a large reel, NIPDAU at moisture level 3 |
| Finish | Level 3 at 260 C with a 168 hour floor life on the active row |
An obsolete row is not an obsolete part, but it is an order that fails
The catalogue code carries the Q1 automotive suffix and no reel suffix, and the addendum prints that exact string as obsolete while the reeled version of the same silicon prints active at 1000 pieces. What that means in practice is that a purchase order written against the catalogue string will be rejected by the vendor's own system even though the part is shipping. The fix is small and it has to happen before the order, not after: quote the reeled string, and confirm the packing because 1000 pieces on a reel is a shorter reel than the 2500 that most SOIC parts ship on.
The moisture level 3 with a 168 hour floor life is the second detail. A wide body isolator that has been open for a week needs a bake before reflow, and on an automotive build that bake has to be recorded. The driver is also worth pairing with the right bias arrangement: a bipolar supply with a negative gate rail needs the output side lockout to be referenced to the driver ground, which is what this part provides and what an optocoupler replacement often does not. Our obsolete part cross reference hub page covers how we handle a row that has moved.
Buyer questions on the UCC5390ECQDWVQ1
Is the part still available? The silicon is. The reeled string prints active at 1000 pieces, and the un-reeled string prints obsolete, so the order has to be written on the active row.
Why is the creepage 8.5 mm? The DWV body is a wide body SOIC with the pins formed to give that distance, which is what a 5 kVRMS rating needs at the pollution degree of a motor drive.
Does the driver include the isolated bias supply? No. It isolates the gate signal, and the bias for the driver side has to come from a separate isolated supply. A module such as the UCC33420 is the part that provides it.
Availability and cross reference
The active row is 1000 pieces on a reel, which is a fraction of the usual SOIC count, so a program that needs tens of thousands of units plans around several reels rather than one. We check the row status on every quote for this part and record the string that was ordered, because the obsolete and active rows differ by four characters. The handling and re-qualification route for a customer who has been buying the obsolete string is on our BOM shortage recovery page.