UCC38C42DR
Product Specifications
UCC38C42DR
Texas Instruments — Power Management & Signal Chain
Product Overview
The UCC38C42DR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
UCC38C42DR: full duty current mode control at commercial temperature, in a taped SOIC
The UCC38C42DR is the 100 percent duty member of the UCCx8C4x family with the off line lockout of 14.5 V on and 9 V off. The 3 prefix marks the commercial temperature range of 0 C to 85 C, where the 2 prefix marks minus 40 C to 125 C, and the electrical set is otherwise identical: 50 microamps of start up current, 2.3 mA of run current at 52 kHz, a 5 V reference at 1 percent, a 2.5 V error amplifier reference, 35 ns from current sense to output, and a 1 A peak totem pole output with 25 ns rise and 20 ns fall.
Full duty suits a boost converter that has to hold regulation when the input approaches the output, and it suits a flyback that needs more than half a cycle at low line. The trap in this family is the pairing: the -42 and the -43 reach 96 percent, while the -44 and the -45 stop near 48 percent because their output stage toggles on alternate oscillator cycles. Two codes in the same body with the same pinout therefore cannot be exchanged on a forward converter without checking which one has the toggle latch.
Key electrical data for the UCC38C42DR
| Supply | Start up 50 microamps typical, run current 2.3 mA at 52 kHz, operation to 1 MHz |
| Lockout | Turn on 14.5 V inside a 13.5 V to 15.5 V window, turn off 9 V inside a 8 V to 10 V window |
| Reference | 5 V at 1 percent, 4.9 V to 5.1 V, error amplifier reference 2.5 V at 1 percent |
| Output | 1 A peak totem pole, 25 ns rise, 20 ns fall, 35 ns current sense to output |
| Duty | 96 percent minimum maximum duty, output frequency equal to the oscillator frequency |
| Temperature | 0 C to 85 C on the UCC38C4x rows, minus 40 C to 125 C on the UCC28C4x siblings |
Package, marking and reel data
| Body | SOIC 8 pin on the .A row, the plain row prints VSSOP DGK, marking 38C42 |
| Reel | 2500 pieces on a large tape and reel on both rows |
| Finish | NIPDAU, level 1 unlimited on the SOIC row, level 2 with a one year floor life on the VSSOP row |
| Note | The G4 row of the same family prints obsolete and carries the marking 38C43 |
Reading three rows of one string
The addendum prints this string three times and the three rows do not agree. The plain UCC38C42DR row shows VSSOP with 8 pins, NIPDAU and moisture level 2 with a one year floor life. The .A row shows SOIC with 8 pins, NIPDAU and level 1 unlimited. The G4 row prints obsolete, and its marking field reads 38C43 rather than 38C42. None of that changes the silicon, but it does mean the body and the moisture level have to come from the label on the reel rather than from the row that a search engine returns first. For a build that runs a controlled reflow profile, level 1 against level 2 is the difference between no bake and a bake after a week on the shelf.
The other check is the temperature grade. A commercial part at 0 C to 85 C is fine inside a rack product and marginal in a sealed outdoor enclosure, where the internal ambient can pass 85 C on a summer afternoon. The industrial sibling carries the same function at minus 40 C to 125 C with the same pinout, so the grade is a purchasing decision rather than a board change, and the reel count does not move with it. Our power management cross reference page lists the members and the grades.
Buyer questions on the UCC38C42DR
Is this the same part as the UCC28C42DR? The electrical set is the same. The difference is the temperature grade: 0 C to 85 C here against minus 40 C to 125 C on the 28C42.
What limits the duty cycle to 96 percent? The internal oscillator discharge and the minimum off time, not a toggle latch. The -44 and -45 members carry the toggle latch and stop near 48 percent.
Which row should be ordered? The one whose body and moisture level match the intended reflow profile. We quote the row explicitly rather than the short string.
Availability and cross reference
All rows print a 2500 piece reel except the G4 row, which is obsolete. Because the family covers two duty limits, three lockouts and two temperature grades in one pinout, a substitution is always possible and never automatic. We hold the commercial and industrial grades of the 96 percent member and check the toggle latch before offering a swap, and the procedure is on our how to verify a drop in replacement page.