UCC28C43DGKR
Product Specifications
UCC28C43DGKR
Texas Instruments — Power Management & Signal Chain
Product Overview
The UCC28C43DGKR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
UCC28C43DGKR: the 8.4 V lockout member of the BiCMOS current mode family, in a VSSOP body
The UCC28C43DGKR is a current mode pulse width modulator in an eight pin VSSOP, one of the UCCx8C4x family that replaces the UCx84x parts pin for pin. The -43 suffix sets a lockout of 8.4 V on and 7.6 V off, the middle of the three options: the -42 and -44 turn on at 14.5 V for off line bias, the -40 and -41 at 7 V for battery systems, and the -43 and -45 suit a DC to DC converter biased from a 12 V rail. Maximum duty on this member is 96 percent minimum and the output frequency equals the oscillator frequency, where the -41, -44 and -45 members divide the oscillator by two and stop at about 48 percent.
The electrical set is what the family is known for: 50 microamps of start up current against 2.3 mA of run current at 52 kHz, a 5 V reference trimmed to 1 percent, an error amplifier reference of 2.5 V at 1 percent, a 35 ns delay from current sense to output, and a 1 A peak totem pole output with 25 ns rise and 20 ns fall. Operation to 1 MHz is specified, which is high for a part with this pinout, and the trimmed oscillator discharge current makes the maximum duty and the dead time more predictable than on the older bipolar parts.
Key electrical data for the UCC28C43DGKR
| Supply | Start up 50 microamps typical and 100 microamps maximum, run current 2.3 mA at 52 kHz |
| Lockout | Turn on 8.4 V inside a 8.4 V to 9 V window, turn off 7.6 V inside a 7 V to 8.2 V window |
| Reference | 5 V initial accuracy 1 percent, 4.9 V to 5.1 V, error amplifier reference 2.5 V at 1 percent |
| Output | 1 A peak totem pole, rail to rail, 25 ns rise and 20 ns fall |
| Timing | 35 ns typical from current sense to gate drive output, operation to 1 MHz |
| Duty | 96 percent minimum maximum duty on this member, output frequency equal to oscillator frequency |
Package, marking and reel data
| Body | DGK, VSSOP 8 pin, marking 28C43 or 2C43 depending on the row |
| Reel | 2500 pieces on a 330 mm reel, large tape and reel |
| Finish | The plain row prints Call TI for lead finish and a dash in the RoHS column, the .A row prints Call TI at level 2 |
| Grade | Ambient minus 40 C to 125 C on the UCC28C4x rows, 0 C to 85 C on the UCC38C4x rows |
Why this row needs a call before the first order
The plain UCC28C43DGKR row in the addendum shows the RoHS column as a dash and the lead finish as Call TI, while the .A row of the same string shows the same finish and a moisture level of 2 with a one year floor life. A dash in the RoHS column is not a statement that the part is non compliant, it is a field the vendor has not filled on that row, but a medical or automotive customer will read it as one. The G4 row of the same family prints NIPDAU at level 1 in a SOIC body, which is a different package and not a substitute. The practical rule is to name the suffix and the body on the order and to ask for the material declaration with the confirmation. Our supplier quality audit page describes the certificate set we request with each lot.
The VSSOP body is the reason this code exists in the catalogue. It is 3.0 mm by 3.0 mm of body against 3.91 mm by 4.90 mm for the SOIC, and on a dense bias board that difference decides whether the controller fits between two transformers. The pinout is unchanged, so a board can move between the two bodies with a footprint change and no circuit change, and the electrical behaviour follows the suffix rather than the package.
Buyer questions on the UCC28C43DGKR
What is the difference between the -43 and the -44? The lockout and the duty limit. The -43 turns on at 8.4 V and reaches 96 percent duty, the -44 turns on at 14.5 V and stops near 48 percent because its output divides the oscillator by two.
Will a UC3843 circuit work with this part? The pinout is the same and the vendor states pin to pin compatibility. The differences are the trimmed discharge current, the tighter reference and the lower start up current, all of which improve on the older part.
Is the VSSOP body available on a large reel? Yes, 2500 pieces. The 80 piece tube on some rows of this family belongs to a different body and is not the packing of this code.
Availability and cross reference
This row prints active, and the family covers three lockout levels and two duty limits in the same pinout, so a customer can move between members without a board change. What does change is the bias arrangement and the magnetic component, and those have to be checked before a substitution is offered. We hold the 8.4 V member in the VSSOP and the SOIC bodies and quote the body explicitly, and the substitution check is on our power management cross reference page.