Contact Us

TPSM843321RCJR

Brand: Texas Instruments
Texas Instruments TPSM843321RCJR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPSM843321RCJR — Power Management & Signal Chain | Superb Automation

TPSM843321RCJR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPSM843321RCJR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPSM843321RCJR: 18 V in, 3 A out, 98 percent duty and a 2.1 mm profile

The TPSM843321RCJR is a 3.8 V to 18 V input, 3 A synchronous buck module in a nine pin QFN-FCMOD of 3.3 mm by 4.5 mm with a maximum height of 2.05 mm. The 98 percent maximum duty cycle is the number that makes it interesting on a 12 V bus: a 10.8 V rail from a 12 V input, or a 5 V rail from a 5.2 V supply, stays in regulation instead of falling out and dropping the load. The 70 ns minimum on time and the 8 us maximum on time are the pair that bound how far the duty can move in either direction at 2.2 MHz.

Mode selection is the other feature. The module runs in PFM at light load for efficiency or in forced continuous conduction for a clean ripple, selected by a pin, and it can be synchronised to an external clock from 200 kHz to 2.2 MHz with a phase shift that lets several modules share the load current across a bus without stacking their ripple. Frequency spread spectrum is on the emission side, and the pin out is arranged so the input loop is short.

Key electrical data on the page

Input and output3.8 V to 18 V in, 0.8 V to 12 V out, 3 A continuous, 0.6 V reference at 1 percent
Duty cycle98 percent maximum, with 70 ns minimum on time and 8 us maximum on time
Quiescent28 uA typical, which keeps a standby rail from draining a 12 V battery
Switching200 kHz to 2.2 MHz selectable, synchronisable with a phase shift between modules
ModesPFM at light load or forced continuous conduction, selected by the MODE pin
Soft startselectable ramp time, with the power good function on the same pin
RuggednessMil-STD-883D shock at 1500 G and vibration at 20 G, HBM 3000 V and CDM 1000 V
Thermaljunction range -40 C to 125 C, and the note that operating above 125 C shortens life

Package, marking and reel data

BodyQFN-FCMOD RCJ, 9 pins, 3.3 mm by 4.5 mm, maximum height 2.05 mm
Reel3000 pieces on a large reel, nickel palladium gold finish, level 2 at 260 C
Marking and gradeM843321 on the top, rated -40 C to 125 C junction
Addendum quirkthe package column prints null for the plain code and only the .A row carries QFN-FCMOD RCJ 9 pins

What a 98 percent duty cycle changes on a 12 V bus

A converter that tops out at 90 percent duty needs a 2 V margin between input and output, so a 12 V bus with a 10 percent tolerance cannot produce a 10.8 V rail at all. A 98 percent part can, and the switch stays on almost continuously with the current set by the load and the inductor resistance. The consequence is that the drop across the module becomes the limiting factor rather than the duty cycle, and the 55 to 90 milliohm class of resistance in the silicon shows up as a few tens of millivolts at 3 A.

The wide output range, 0.8 V to 12 V, means the same part covers a 1 V core rail, a 5 V peripheral rail and a 12 V pass through, which is unusual for a module this small. For a 12 V industrial board that needs three rails, the family can be used three times with three dividers, and the sync with phase shift keeps the input ripple from adding up. That last point is the one that often decides between a module and a discrete converter on a board with a tight input filter.

Buyer questions on the TPSM843321RCJR

Is the package field in the addendum reliable? Not for the plain code: the orderable table prints null for the package and pin count, and only the .A row carries QFN-FCMOD RCJ and nine pins. The body is the same nine pin RCJ part, and the drawing in the same document shows 3.3 mm by 4.5 mm with a 2.05 mm maximum height.

Can several modules share a clock? Yes. The sync input takes 200 kHz to 2.2 MHz, and the phase shift feature lets two or three modules run at different phases so their input current pulses do not coincide.

What happens if the output is shorted? The module enters hiccup over current protection and retries until the short clears, while the power good flag stays low. The thermal shutdown is a second line of defence rather than the primary one.

Buying this part through a component supplier

A new module with a March 2025 datasheet revision is usually early in its life, so the channel stock and the second source question both matter. We supply the RCJ code with the date code and moisture level on the label through date code management, and component obsolescence management is where a programme tracks a part that has not yet been through a full life cycle. The power management cross reference lists the 18 V modules we can compare by height and pin count.