TPS7B8233QDRVRQ1
Product Specifications
TPS7B8233QDRVRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The TPS7B8233QDRVRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TPS7B8233QDRVRQ1: automotive 300 mA high voltage linear regulator with 2.7 uA quiescent current
TPS7B8233QDRVRQ1 is a 3.3 V fixed linear regulator that holds its output through cold crank and start stop in a WSON body of 6 pins. The input is rated to 40 V, the output is fixed at 3.3 V, and the quiescent current is 2.7 uA typical at light load with 300 nA in shutdown. Accuracy is plus or minus 1.5 per cent on the WSON and HVSSOP bodies, and the part is qualified to AEC-Q100 grade 1 with a grade 0 option on the wider bodies.
Order code and package
| TPS7B8233QDRVRQ1 | 6-pin WSON (DRV), 3000-piece large reel, marking 1ORH, -40 C to 150 C |
| TPS7B8233QDGNRQ1 | 8-pin HVSSOP (DGN), 2500-piece large reel, marking 1GGX |
| TPS7B8233EPWPRQ1 | 14-pin HTSSOP (PWP), 2500-piece large reel, grade 0, marking 7B8233E |
| Moisture sensitivity | Level-2-260C-1 YEAR on the DRV row, Level-3-260C-168 HR on the DGN row |
| Finish | NIPDAUAG on the WSON body, NIPDAU on the wider bodies |
Electrical parameters that decide the application
| Input voltage | up to 40 V, absolute maximum 45 V |
| Output voltage | 3.3 V fixed, plus or minus 1.5 per cent over the full temperature range |
| Output current | 300 mA |
| Quiescent current | 2.7 uA typical at light load, 1.9 to 3.5 uA on the DRV and KVU bodies |
| Shutdown current | 300 nA typical with the enable low |
| Undervoltage detection | 2.7 V on the input, output turns off as the rail falls |
| Enable thresholds | 2 V high, 0.7 V low |
| Line regulation | 10 mV from 6 V to 40 V at 10 mA |
| Operating junction temperature | -40 C to 150 C |
Bodies and qualification grades
| DRV, 6 pin WSON | 2 mm class body, 3000-piece reel, the smallest of the three |
| DGN, 8 pin HVSSOP | 2500-piece reel, wider body for heat spreading |
| PWP, 14 pin HTSSOP | 2500-piece reel, grade 0 to 150 C, the row for the hottest location |
| Grade 1 | -40 C to 125 C ambient, the standard automotive grade |
| Grade 0 | -40 C to 150 C ambient, the row that carries the E suffix |
| Input capacitor | a 22 uF part from input to ground, close to the pin |
Points to check before this part goes on a BOM
The reason this part exists is the quiescent current, 2.7 uA typical at light load. On a module that is parked for weeks, a linear regulator that draws 50 uA costs more energy over a month than the load it feeds, and 2.7 uA is low enough that the module controller, not the regulator, becomes the limiting term.
Shutdown current is 300 nA typical with the enable pulled low, so the enable line is a real disconnect for the module. A board that leaves the enable tied to the input rail gets the 2.7 uA figure instead, and the difference between the two is the difference between a two week and a two month parked budget.
The input is rated to 40 V with an absolute maximum of 45 V, which covers a 12 V or 24 V automotive rail with load dump handled upstream. It does not make the part a load dump protector, so the clamp or the transient suppressor ahead of it still has to be there and still has to be rated for the pulse.
The output accuracy is quoted as plus or minus 1.5 per cent over the full temperature range on the WSON and HVSSOP bodies. That is tight enough to feed a CAN transceiver, a sensor or a microcontroller directly, without a second stage, which is why the part appears between a 40 V rail and a 3.3 V load in one step.
Undervoltage detection turns the output off at 2.7 V on the input. During a cold crank the rail can fall below that and come back within milliseconds, and the output will follow, so a load that must not see the dip needs its own hold up capacitor or a boost stage, not a larger output capacitor on the regulator.
Line regulation is 10 mV from 6 V to 40 V at 10 mA, which is the number that matters on a 24 V rail that swings with the alternator. Load regulation is specified from 1 mA to 300 mA, so a load that idles at a few microamps sits outside the specified window and its behaviour comes from the light load curves.
The grade 0 rows exist because the same silicon is offered to 150 C ambient in the wider bodies. A module bolted near the engine or near a lamp housing can see 125 C ambient in normal operation, and the grade 1 row has no margin left at that point, so the body and the grade have to be chosen together.
The three bodies are not footprint compatible. The 6 pin WSON, the 8 pin HVSSOP and the 14 pin HTSSOP have different pad patterns, and the thermal performance differs, so a board that may move from one to the other late in the programme should be laid out for the widest body it can accept from the start.
The enable thresholds are 2 V high and 0.7 V low, which allows a 3.3 V logic line to drive the pin and also allows a divider from the input rail to hold the regulator off until the rail is high enough. That divider draws current from the rail, and its value has to be large enough not to spoil the 2.7 uA figure it is protecting.
A 22 uF ceramic output capacitor is the value the vendor specifies, and the part is stable across the range of ceramic dielectrics it lists. A board that substitutes a smaller capacitor for cost will usually still regulate but will show a larger dip on a load step, and the dip is what the downstream circuit reacts to.
A 22 uF ceramic capacitor in a small body loses a large part of its capacitance under DC bias, and on a 40 V rail the loss can be more than half at the rated voltage. The regulator is stable with the capacitance that is actually there, not the value printed on the reel, so the capacitor should be chosen by its biased value at the working rail and its temperature coefficient, not by its nominal marking. This is also the part of the circuit that decides how the output behaves during a cold crank dip.
Where this order code fits
It drops a 12 V or 24 V automotive rail to 3.3 V for a CAN transceiver, a sensor, a gateway module or a body controller that has to stay alive while the vehicle is parked, and it holds that rail through cold crank and start stop. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Medical Device Components page.
Questions buyers ask
Can it take a 24 V truck rail directly? Yes, the input is rated to 40 V and the absolute maximum is 45 V, so a 24 V rail with the usual transients fits, provided the load dump pulse is clamped ahead of the part.
What is the real standby draw? 2.7 uA typical with the regulator enabled and no load, and 300 nA typical with the enable low. Both figures are typical, so a worst case budget should use the maximum column in the electrical table.
Does it need a minimum load? No. The part regulates with no load, and the quiescent current figure is specified at light load. Load regulation is stated from 1 mA, so the behaviour below that is taken from the curves rather than from a guaranteed number.
SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Obsolete Part Cross Reference Hub page sets out the checks that keep a substitute from failing on the bench.