Contact Us

TPS7A1601DRBR

Brand: Texas Instruments
Texas Instruments TPS7A1601DRBR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS7A1601DRBR — Power Management & Signal Chain | Superb Automation

TPS7A1601DRBR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS7A1601DRBR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS7A1601DRBR: the adjustable 60 V regulator in the eight pin SON

The TPS7A1601DRBR is the same adjustable die as the HVSSOP member, packed in the eight pin SON body coded DRB at 3.3 mm by 3.3 mm on a 3000 piece large reel. The electrical window is unchanged: 3 V to 60 V at the input, 1.2 V to 18.5 V at the output through a divider, 100 mA of load, 5 uA of quiescent current and an open drain power good output with a programmable delay.

The SON body has the lower profile and the shorter thermal path of the two, which makes it the better choice when the board is dense and the regulator has to shed a watt. Its marking is PA5M, its finish is NIPDAU, and it carries moisture level 2 with a one year floor life, so a reel that has been open for longer than that needs a bake before reflow.

Key electrical data for the SON member

Input range3 V to 60 V, reference 1.193 V typical over a 1.169 V to 1.217 V window
Output range1.2 V to 18.5 V adjustable, 100 mA maximum
Quiescent current5 uA typical, 15 uA maximum, 1 uA typical in shutdown
Dropout60 mV typical at 20 mA, 225 mV typical at 100 mA
Current limit265 mA typical, 500 mA maximum
Power goodopen drain, 95 percent rising and 93 percent falling, delay from an external capacitor
Thermal170 C shutdown, 150 C reset, minus 40 to 125 C operating junction range

Package, marking and reel data

BodySON DRB, 8 pins, 3.3 mm by 3.3 mm, exposed pad
Reel3000 pieces, large tape and reel, 330 mm carrier, 12 mm tape
FinishNIPDAU, moisture level 2, 260 C, one year floor life
MarkingPA5M
Thermal resistancethe DRB body is the lower of the two thermal paths in this family

Where the SON body earns its place

Industrial and telecom boards usually need one quiet rail derived from a bus that is far above the load voltage, and they need it in a package that survives a reflow profile on a thick board. The SON body suits that combination: no leads to wick solder away from the pad, a thermal pad directly under the die, and a footprint that is smaller than the HVSSOP at the same electrical rating. It is the body to specify when the regulator sits close to a hot component and the junction temperature is the limit.

The working limit is still the dissipation. A 48 V bus and a 5 V load at 100 mA means 4.3 W, which is well outside the package; the same current at 12 V in is 700 mW and needs a solid copper area but no heatsink. The practical rule for this family is to keep the product of the voltage across the pass element and the load current below about a watt, and to let a switching stage handle anything above that.

Buyer questions on the SON code

Is the pinout the same as the HVSSOP version? The functions are the same but the body and the thermal pad are different, so the footprints are not interchangeable. A board laid out for one needs a new pad pattern for the other.

How much copper does the exposed pad need? Enough to keep the junction below 125 C at the worst case dissipation. The data sheet gives the junction to ambient figure for the body, and the board area is part of that figure, so a pad smaller than the reference pattern invalidates it.

Does the delay capacitor affect the power good trip point? No. The trip point stays at 95 percent rising and 93 percent falling; the capacitor only sets how long the flag waits after the output crosses it.

Sourcing the SON version

Because both bodies share one die, a line can move between them if the footprint allows, which is the usual way to survive a reel shortage on one packing. The drop in replacement check page sets out the four conditions we test before approving that move, and vendor consolidation covers the buying side of holding two packings of one part.

The SON body changes the thermal answer but not the electrical one, and the thermal answer is what usually decides the input voltage. At 24 V in and 5 V out the part dissipates 1.9 W at 100 mA, which needs a copper plane and, in most builds, an external heatsink; at 12 V in the same load dissipates 700 mW and needs only a solid pad. The data sheet restricts the full load input to 24 V for that reason and states that higher inputs are usable only at lower current. Moisture level 2 with a one year floor life also means a reel that has been open longer than that needs a bake before it goes on the line.