Contact Us

TPS7A0220PDBVR

Brand: Texas Instruments
Texas Instruments TPS7A0220PDBVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS7A0220PDBVR — Power Management & Signal Chain | Superb Automation

TPS7A0220PDBVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS7A0220PDBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS7A0220PDBVR: 2.0 V at 200 mA in a five pin SOT-23

The TPS7A0220PDBVR is the 2.0 V fixed member of the TPS7A02 family from Texas Instruments, a 200 mA nanopower regulator supplied in the five pin SOT-23 body coded DBV rather than the X2SON used by most of the family. It ships 3000 pieces per reel with a nickel palladium gold or tin finish depending on the row, moisture level 1, marking 22MT, and it draws 25 nanoamps at no load.

The SOT-23 body is the reason this order code matters. A 1.0 mm by 1.0 mm X2SON is the smallest option, but it cannot be hand placed, inspected visually or reworked with an iron, so a prototype line, a low volume build or a repair depot needs the larger body. The electrical behaviour is the same, with one difference that buyers should note: the thermal resistance of the SOT-23 body is 181.9 C per W against 179.1 for the X2SON, so the electrical and thermal performance are effectively identical and the choice is mechanical.

Key electrical data for the 2.0 V point

Output voltage2.0 V fixed, plus or minus 1 percent at 25 C and 1.5 percent over -40 to 125 C
Output current200 mA continuous, current limit 240 mA to 750 mA
Input range1.5 V to 6.0 V, 2.45 V needed at 200 mA because of dropout
Quiescent current25 nA typical at 25 C, 46 nA maximum, 60 nA maximum to 85 C
Dropout400 mV maximum at 200 mA up to 85 C in the 1.8 V to 2.5 V band, 450 mV over the full range
Rejection and noise55 dB at 1 kHz and 30 mA, 130 uV RMS at 0.8 V over 10 Hz to 100 kHz

Package, marking and reel data

BodySOT-23 DBV, 5 pins, 2.9 mm by 2.8 mm
Reel3000 pieces, large tape and reel
Finish and moistureNIPDAU or tin depending on the row, level 1, unlimited floor life
Marking22MT
Thermal resistance181.9 C per W junction to ambient in the five pin body

Where a 2.0 V rail at 200 mA is used

2.0 V is a common rail for a sensor analog supply, a low power radio and a memory bus in battery equipment. In the family application list it shows up in meters, detectors, medical monitors and card readers, all of which run from a cell or a small lithium pack and have to stay alive for years. The 25 nA idle current is the reason the part exists, and the 200 mA capability is what lets the same rail survive a transmit burst or a display refresh.

The transient response is worth a line of its own. The device settles a 1 mA to 50 mA step in under 10 microseconds with about 100 mV of undershoot, and its load regulation from 1 mA to 200 mA is 20 mV typical and 38 mV maximum up to 85 degrees. On a 2.0 V rail that is 1.9 percent, so a load that steps across the full range sees a window slightly wider than the initial accuracy. A radio that draws a burst of 150 mA at 2.0 V is inside the part's capability but the rail sag should be checked against the radio's minimum supply rather than assumed.

At 200 mA from 3.3 V the dissipation is 0.26 W and the rise is 47 degrees on the SOT-23 body, which is comfortable. From 5 V it is 0.6 W and a 109 degree rise, which is at the edge of the 125 degree junction rating in a warm enclosure. The larger body does not change that arithmetic, so a 2.0 V rail from 5 V still needs a switching stage ahead of it.

Buyer questions on this order code

Is the SOT-23 version the same die as the X2SON? Yes. The electrical table is the same and the thermal resistance differs by less than 2 percent, so the choice between the two bodies is about assembly and rework rather than about performance.

What is the difference against the 1.8 V member? The trim point and 50 mV of dropout band. Both use the same electrical table otherwise, so a substitution changes the rail voltage, which is a system decision and not a component one.

Can this part run from a single lithium cell? Yes at light load. The 1.5 V input floor covers a cell down to 1.5 V, and at 2.0 V output the part is in dropout in that state but keeps its 25 nA ground current, so the load sees the cell voltage minus the dropout.

Sourcing the TPS7A0220PDBVR through SUPERB

SUPERB quotes this order code in the SOT-23 body with the finish and the marking stated, because the same family is offered with several finishes and a line audit reads the marking rather than the description. The 22MT marking and the level 1 moisture class are checked on receipt.

Where a prototype or a repair line needs a hand placeable body, the pin to pin cross reference page lists the alternatives in the same family, and kitting service covers small quantity builds. Send the quantity and the assembly method and the answer follows.