TPS65910A31A1RSLR
Product Specifications
TPS65910A31A1RSLR
Texas Instruments — Power Management & Signal Chain
Product Overview
The TPS65910A31A1RSLR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TPS65910A31A1RSLR power management unit for a processor
The TPS65910A31A1RSLR is a power management unit built around an embedded power controller: two step down converters for the processor cores, one step down converter for the input output rail, one step up converter for a 5 V rail, eight low dropout regulators plus a real time clock regulator, and a real time clock with a 32.768 kHz crystal oscillator. The body is a 48 pin QFN, and the part is rated for a single cell lithium battery or a 5 V adapter input.
The interesting block is the power controller rather than the converters. It holds an EEPROM with the power up and power down sequences, the default voltages and the sleep state settings, so the product does not need a host to bring its rails up. Two enable signals multiplexed with the SmartReflex bus can drive any supply state, and the core rails follow dynamic voltage management commands from the processor over a dedicated bus.
Two high speed I2C interfaces are provided: one for general purpose control and one dedicated to SmartReflex class 3 commands. The converters can be synchronised to an internal or external 3 MHz clock, which keeps their switching away from a radio band or a sensitive converter.
Key parameters from the SWCS046U document
| Converters | Two step down for processor cores, one step down for input output, one step up to 5 V |
| Regulators | Eight LDOs plus a real time clock LDO for internal use |
| Voltage management | SmartReflex compliant dynamic voltage management on the core rails |
| Controller | Embedded power controller with an EEPROM holding sequences, defaults and sleep settings |
| Interfaces | One high speed I2C for control, one high speed I2C for SmartReflex class 3 |
| Enable inputs | Two enable signals multiplexed with the SmartReflex bus |
| Clock | 32.768 kHz crystal oscillator or a built in 32 kHz RC oscillator, RTC with date, time, calendar and alarm |
| Switching sync | Internal or external 3 MHz clock for the converters |
| Supervision | Thermal shutdown with hot die detection, one configurable GPIO |
| Package | RSL 48 pin QFN, the family document is a top level specification without an orderable addendum table |
What a document without an addendum means for buying
The document served for this family is a top level specification: it describes the blocks, the pin functions and the register map, and it does not carry the orderable addendum table that most other parts in this group include. The reel size, the moisture level and the finish therefore have to come from the orderable record or from the distributor, not from the data sheet.
That is a small thing with a real consequence: a scheduled order written from the data sheet alone has no quantity column to check against, so the first confirmation of the reel size happens at the quotation stage. It is worth naming the reel on the request rather than waiting for the quote to come back with a default.
Where this part fits
Processor boards for industrial and consumer products with a single cell battery, handheld instruments and any product that has to bring its rails up without host software. Related notes sit under power management cross reference and obsolete part cross reference hub.
What to check before a purchase order
Check the sequence stored in the controller before the first build. The defaults are set for a particular processor family, and a part programmed for another family brings the rails up in an order the board does not expect. That failure looks like a dead board, not like a supply problem.
Check the SmartReflex path as well. A board that does not use the second bus still has to pull its lines to a defined level, because an undriven bus on some revisions holds the part in a test state. The incoming check we run is in incoming inspection plan.
Questions that come up on this part
Can the 5 V boost be disabled? Yes, and the pin is left open when unused, but the boost is also what feeds the USB path on some boards, so the rail list has to be read before that decision.
Is the RTC retained without a backup cell? Only while the main supply is present, so a product that keeps time across a battery swap needs the backup node populated.
One more point on the controller. Because the sequences live in EEPROM, the part can bring a board up with no host at all, which is why it appears in products that have to start from a battery insertion rather than from a software command. The same property means the EEPROM contents are part of the product definition: a revision that changes a rail order is a new part configuration, not a software update, and the two cannot be mixed on one build.