Contact Us

TPS6522312WRAHRQ1

Brand: Texas Instruments
Texas Instruments TPS6522312WRAHRQ1 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS6522312WRAHRQ1 — Power Management & Signal Chain | Superb Automation

TPS6522312WRAHRQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS6522312WRAHRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS6522312WRAHRQ1 automotive PMIC with four converters and three LDOs

The TPS6522312WRAHRQ1 is a power management IC for safety relevant automotive applications: four step down converters, three linear regulators, six configurable general purpose input output pins, a twelve bit analogue to digital converter and an OTP configured power sequence in a 36 pin QFN of 5 mm by 6 mm on a 0.5 mm pitch. The input range is 3 V to 5.5 V and the part is qualified to AEC Q100 grade 1, minus 40 to plus 125 degrees ambient, with HBM level 2 and CDM class C4A.

The functional safety documentation is the point of this part rather than the electrical performance. The vendor states systematic integrity up to ASIL D and up to SIL 3, with documentation available to support both ISO 26262 and IEC 61508 system work. For a module that has to carry a safety case, that documentation is the deliverable, and a general purpose PMIC without it cannot be substituted no matter how close the rails are.

The rail list targets the AM62A, AM67, AM62P and TDA4 families: four converters for the core, the memory and the input output rails, one low noise LDO of 300 mA over 1.2 V to 3.3 V with a load switch mode, and two further LDOs. The six GPIO pins, the reset and safe state outputs and the ADC are there so the PMIC can act as the supervisor as well as the supply.

Key parameters from the SLVSH24 document

Input range3 V to 5.5 V supply, automotive grade
ConvertersFour step down converters, BUCK1 and BUCK2 as one pair and BUCK3 and BUCK4 as the second
LDOsThree regulators, one of them low noise at 300 mA over 1.2 V to 3.3 V with load switch mode
SupervisionSix configurable GPIOs, reset output, safe state output, one 12 bit ADC
SequenceOTP configurable power up and power down order
SafetySystematic integrity up to ASIL D and SIL 3, documentation for ISO 26262 and IEC 61508
QualificationAEC Q100 grade 1, minus 40 to 125 degrees ambient, HBM level 2, CDM C4A
PackageRAH 36 pin QFN of 5 mm by 6 mm, 0.5 mm pitch, 3000 pieces on a large reel
Moisture levelLevel 2 with a one year floor life
Order noteOne published row carries call TI in the quantity column rather than a reel size

What the safety grade changes on a purchase order

A PMIC in a safety path is bought with a document package, not just a reel. The failure mode assumptions, the diagnostic coverage for the supervision pins and the FMEDA numbers come from the vendor and have to match the module level analysis. That is why the order code and the silicon revision have to be pinned on the purchase order rather than left to the distributor: a revision change that is electrically invisible can invalidate a safety case.

The second consequence is traceability. A grade 1 part in a 36 pin body has a date code and a lot number that the module maker has to keep, because the safety case is written against a population rather than against a single unit.

Where this part fits

Automotive infotainment and digital cluster modules, camera mirror systems, driver monitoring systems and the processor boards behind them, plus industrial products that need the same documentation. Related notes are filed under power management cross reference and supplier quality audit.

What to check before a purchase order

Check the OTP image and the reel size on the same row. The addendum prints the image inside the order string and, on one of the rows for this body, prints call TI in the quantity column instead of a reel size, so a schedule written from the family name will be wrong on both counts.

Check that the safety documentation revision matches the silicon revision being bought. A module that quotes the previous document set against a new silicon revision is a finding in an audit rather than a supply problem. The incoming check we run for automotive parts is in incoming inspection plan.

Questions that come up on this part

Is the 12 bit ADC usable for rail monitoring? It is, and the vendor publishes the channel mapping and the reference, but the accuracy is set for supervision rather than for metrology, so a rail that needs 0.1 per cent measurement takes an external monitor.

Can the part be used at 3.3 V input? Yes, 3 V is the floor and the converters regulate from there, but the headroom for a 3.3 V rail at 3.0 V input is thin, so a boost stage or a higher input rail is the practical answer for a 3.3 V load.

Two further items belong on the drawing for this body. The 36 pin package carries the loss of four converters through its exposed pad, so the pad has to sit on a plane with a via array rather than on a short trace. The second is the supervision path: the reset and safe state outputs are part of the safety argument, so their pull ups, their filter capacitors and the pins they reach have to be checked against the safety analysis rather than against a bring up board, because a filter that is fine on a bench can hide a fault that the analysis assumes is detected.