Contact Us

TPS629206DRLR

Brand: Texas Instruments
Texas Instruments TPS629206DRLR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS629206DRLR — Power Management & Signal Chain | Superb Automation

TPS629206DRLR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS629206DRLR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS629206 600 mA buck from a 3 V to 17 V rail

The TPS629206 is the 600 mA member of the TPS6292xx family, sharing the 3 V to 17 V input range, the 0.4 V to 5.5 V output range and the 1 MHz or 2.5 MHz selectable oscillator of the 300 mA part. The switch resistances and the current limit windows are published in the same family tables, with a high side limit between 0.8 A and 1.4 A and a low side limit between 0.5 A and 1.3 A, so the extra current is available within the same control scheme rather than from a different converter.

The quiescent current is 4 microamp typical in power save mode, which is what makes the family suitable for a rail that has to stay alive between measurements. The output can be set by an external divider on the FB pin with a 0.6 V reference, or by the internal divider through the VSET pin with eighteen preset levels between 0.4 V and 5.5 V. Automatic efficiency enhancement adjusts the switching behaviour at light load instead of bursting, so an analogue rail keeps a clean output down to microamps.

The 600 mA rating is what changes the application. A 300 mA rail feeds a sensor or a reference; a 600 mA rail feeds a small FPGA, a display bias, a radio front end or a relay driver bank. At 12 V in and 3.3 V out the duty cycle is under 30 per cent, so the high side conducts briefly and the low side carries most of the conduction loss, and the 85 milliohm low side switch is the number that decides the efficiency.

Key parameters from the SLVSGE2 document

Input range3 V to 17 V
Output range0.4 V to 5.5 V, preset through VSET or set by a divider on FB
Output current600 mA rated on this member, 300 mA on the TPS629203
Switching frequency1 MHz or 2.5 MHz selectable
High side resistance250 milliohm in the family tables
Low side resistance85 milliohm in the family tables
Current limitHigh side 0.8 A to 1.4 A, low side 0.5 A to 1.3 A
Quiescent current4 microamp typical in power save mode with no load
Reference0.6 V on the external divider configuration
Power goodOpen drain output with a threshold referenced to the feedback level
Thermal shutdown170 degrees junction
PackageSix pin DRL SOT-563 body

Where the extra 300 mA goes

Doubling the current rating does not double the loss at the same load, which is the reason a customer sometimes takes the larger member for thermal reasons rather than for current. At 300 mA the 600 mA part runs at half the current density of the 300 mA part at its own rating, and the junction temperature at 60 degrees ambient can be tens of degrees lower. On a board with no airflow that margin is worth more than the cost difference between the two parts.

The limit windows are the same on both members, which means the 600 mA part will deliver its rating and then some before the high side limit intervenes at 0.8 A minimum. That headroom is what allows a start up into a capacitive load, where the converter has to charge the output capacitance at a current above the steady state load. A part whose limit sat exactly at its rating would stall or hiccup on a large output capacitor.

The power good output is a small feature that saves a supervisor. It is an open drain pin with a threshold referenced to the feedback level, so it can drive a reset line or a sequence gate directly. On a board where the 3.3 V rail has to come up before the 1.8 V rail, the power good of the first converter is the enable of the second, and no sequencer chip is needed.

Where this part fits

Display and sensor bias rails, small FPGA and microcontroller supplies on 12 V boards, radio front end rails, relay driver banks and any rail where 600 mA comes from a rail far above the output. The cross reference notes are at power management cross reference and the pin to pin notes are at pin to pin cross reference.

What to check before a purchase order

Check the current class in the order code. The 203 and the 206 share a document, a pinout and a package, and the difference is the digit in the middle of the string. A board that was signed off at 600 mA will run on the 300 mA part until the load exceeds the smaller rating, and the failure appears as a hiccup at warm ambient rather than as a clean overcurrent.

Check the thermal path against the actual enclosure. The SOT-563 body has a small thermal pad and the copper around it is the only heat path, so the same part that runs cool on a bench can reach thermal shutdown inside a sealed housing at 60 degrees ambient. The receipt check we run on these reels is at incoming inspection plan.

Questions that come up on this part

Is the 600 mA part a drop in for the 300 mA part, is the usual question. Inside the same package the pinout is identical and the passives are the same values, so the part will run, and because the limit windows are the same family tables, the overcurrent behaviour does not change either. The recheck is thermal, not electrical.

The second question is whether the output can be 5 V from a 5 V input. It cannot in buck mode, because the part needs headroom to regulate; the output range stops at 5.5 V and the input at 3 V, but the useful conversion requires an input above the output plus the drop across the switches. A 5 V rail from a 5 V bus needs a buck boost converter, not this part.